81.040.30 玻璃产品 标准查询与下载

T/QXBQ 0004-2020 玻璃分酒器

本标准规定了玻璃分酒器的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

glass wine dispenser

T/QXBQ 0005-2020 玻璃果汁罐

本标准规定了玻璃果汁罐的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

glass juice jar

T/QXBQ 0016-2020 人工吹制玻璃杯

本标准规定了人工吹制玻璃杯的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

hand blown glass

T/QXBQ 0003-2020 玻璃方缸

本标准规定了玻璃方缸的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

Glass cylinder

T/QXBQ 0015-2020 人工吹制玻璃高脚杯

本标准规定了人工吹制玻璃高脚杯的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

Hand blown glass goblet

T/QXBQ 0011-2020 玻璃烟缸

本标准规定了玻璃烟缸的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

glass ashtray

T/QXBQ 0002-2020 玻璃蛋糕罩

本标准规定了玻璃蛋糕罩的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

glass cake cover

T/QXBQ 0006-2020 玻璃蜡烛台

本标准规定了玻璃蜡烛台的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

glass candle holder

T/QXBQ 0001-2020 玻璃冰桶

本标准规定了玻璃冰桶的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

glass ice bucket

T/QXBQ 0014-2020 玻璃调味品瓶

本标准规定了玻璃调味品瓶的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。

glass condiment jar

ASTM D1155-10(2020) 玻璃球圆度的标准测试方法

1.1 This test method2 covers the determination of the percent of true spheres in glass spheres used for retroreflective marking purposes and industrial uses. 1.2 This test method includes two procedures as follows: 1.2.1 Procedure A, in which the selected specimen is split into two size ranges or groups prior to separation into true spheres and irregular particles, and 1.2.2 Procedure B, in which the selected specimen is split into five size ranges or groups prior to separation. 1.2.3 In determining compliance with specification requirements, either Procedure A or Procedure B may be used. Where tests indicate failure to meet the specified percent of true spheres and irregular particles, the referee test shall be made in accordance with Procedure B. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Roundness of Glass Spheres

T/ZBH 016-2020 耐火型建筑门窗用防火玻璃制品

本标准规定了耐火型建筑门窗用防火玻璃制品的术语和定义、分类与标记、材料、要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于耐火型建筑门窗用非隔热型复合防火玻璃、单片防火玻璃和由其组成的制品。

Fire-resistant glass glazing for fire-resistant windows and doors in building

ASTM C1294-20 绝缘玻璃边缘密封胶与液体应用玻璃材料的相容性的标准测试方法

1.1 This test method covers a laboratory procedure for quantitatively measuring the compatibility of liquid-applied glazing materials with an insulating glass unit edge sealant. Compatibility is determined by measuring the changes in the insulating glass edge sealant adhesive and cohesive properties. Hereinafter insulating glass is referred to as IG. 1.2 This test method does not address the issue of the integrity of the hermetic seal or changes to the vision area in an IG unit. Such factors as possible unit fogging or primary sealant reaction in a dual-seal system due to volatile components permeating the IG sealant are not considered in this test method. 1.3 The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

T/ZZB 1570-2020 自洁净玻璃

本标准规定了自洁净玻璃的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺。 本标准适用于建筑、汽车、太阳能电池板等使用的自洁净玻璃。

Self-cleanning glass

T/CSTM 00150-2020 玻璃粉烧结制品耐腐蚀性能检测方法

本标准规定了玻璃粉烧结制品耐腐蚀性能检测的术语和定义、原理、仪器设备和试剂、样品制备、试验步骤、试验数据处理。 本标准适用于玻璃粉烧结制品的耐腐蚀性能检测。

Corrosion-resistant testing method for sintered glass powder products

ASTM F2179-20 生产用作蜡烛容器的退火苏打石灰硅酸盐玻璃容器的标准规范

1.1 This specification is specifically for soda-lime-silicate glass containers that are intended to be used as filled candle containers. This specification does not apply to other glass accessories used for candles, such as votive holders, hurricanes, and glass holders used with free-standing candles. The glass manufacturer or glass secondary processor is responsible for the compliance of the product and maintaining documentation of test results during the manufacturing process. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers

BS ISO 24117:2020 玻璃制餐具、礼品、珠宝和灯具 玻璃透明度 分类及测试方法

What is ISO 24117   about? The international standard   ISO 24117   provides you with a generic definition and classification of glass clarity to permit a global understanding of consumer quality requirements, with a corresponding method to measure glass clarity. ISO 24117   establishes requirements for the use of the glass designations “clear glass” and “ultra-clear glass” for non-coloured glass items according to their clarity and iron content.   ISO 24117   specifies a procedure for measuring the clarity of glass items by means of a spectrophotometer. ISO 24117   covers mineral glasses, and glass items where a part is not covered by coating or decoration and is therefore available for sampling.   ISO 24117   is applicable to the use of glass as tableware, giftware, jewellery and luminaries. NOTES- ISO 24117   is not applicable to the use of glass in the context of building, watches, containers, medicine and laboratories, and to other technical uses of glass. ISO 24117

Tableware, giftware, jewellery and luminaries, made of glass. Glass clarity. Classification and test method

ISO 24117:2020 玻璃制餐具、礼品、珠宝和灯具.玻璃清晰度.分类和试验方法

This document establishes requirements for the use of the glass designations “clear glass” and “ultra- clear glass” for non-coloured glass items according to their clarity and iron content. It specifies a procedure for measuring the clarity of glass items by means of a spectrophotometer. This document is applicable to — mineral glasses, and — glass items where a part is not covered by coating or decoration, and is therefore available for sampling. This document is applicable to the use of glass as tableware, giftware, jewellery and luminaries. It is not applicable to the use of glass in the context of building, watches, containers, medicine and laboratories, and to other technical uses of glass.

Tableware, giftware, jewellery and luminaries, made of glass — Glass clarity — Classification and test method

KS F 4903-2019 空心玻璃砖的标准规范

Standard specification for hollow glass blocks

KS L 2004-2019 夹层玻璃

Laminated glass