83.160.01 标准查询与下载

22/30436361 DC BS ISO 14960-1 无内胎轮胎 阀门和组件 第 1 部分：测试方法

BS ISO 14960-1. Tubeless tyres. Valves and components - Part 1. Test methods

22/30436151 DC BS ISO 24163-2 用于轮胎压力监测系统的夹式轮胎气门嘴 第 2 部分：测试方法和性能

BS ISO 24163-2. Clamp-in Tyre Valves For Tyre Pressure Monitoring Systems - Part 2. Test methods and performance

KS M ISO 28580:2022 乘用车、卡车和公共汽车轮胎滚动阻力测量方法.单点试验和测量结果的相关性

Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results

KS M ISO 28580-2022 乘用车、卡车和公共汽车轮胎滚动阻力测量方法.单点试验和测量结果的相关性

Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results

ISO 21634:2022 轮胎用橡胶护板.要求和试验方法

This document specifies requirements and test methods for tube-type tyres in automotive vehicles that require rubber flaps, in order to ensure they are protected against damages to the inner tube caused by the rim or tyre. This document is applicable to tyres for road vehicles. It does not apply to 2/3 wheeler and non-road tyres. Requirements and test methods for rubber flaps for non-road tyres are provided in Annex E.

Rubber flaps for tyres — Requirements and test methods

ASTM F3611-22e1 P225/60R16 97S径向低胎面深度标准参考试验轮胎的标准规范

1.1 This specification covers the general requirements for the P225/60R16 97S radial low tread depth standard reference test tire. The tire covered by this specification is primarily for use as a reference tire for wet braking traction evaluations for tires in a worn state but may also be used for other evaluations. 1.2 This specification provides a 16 rim diameter code standard tire design and construction, standard dimensions, and specifies the conditions of storage. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire

ASTM F551/F551M-16(2022) 在轮胎试验中使用1.707-m[67.23-in.]直径实验室试验车轮的标准实施规程

1.1 This practice covers the requirements for a 1.707-m [67.23-in.] diameter laboratory roadwheel for durability and endurance testing of tires under controlled operating and environmental conditions. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 7 and Note 1. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires

T/CIRA 34-2022 辐照电线电缆束下传输装置

本标准主要内容如下：范围，规范性引用文件，术语和定义，总体要求，型号命名、分类与组成，技术要求，检测方法，检验规则，铭牌、包装和运输。

Conveyor facility under beam for irradiating wires and cables

T/CPCIF 0222-2022 轮胎行业节能监察技术规范

4　监察内容与方法 4.1　企业执行单位产品能耗限额标准情况 4.2　企业执行淘汰落后制度情况 4.3　企业执行固定资产投资项目节能审查制度情况 4.4　企业设立能源管理岗位和聘任能源管理负责人情况 4.5　企业节能工作组织领导情况 4.6　企业执行能源计量管理制度情况 4.7　企业执行能源消费统计管理制度情况 4.8　企业对能源消费实行包费制情况 4.9　企业执行能源利用状况报告制度情况 4.10　企业建立节能目标责任制监察情况 4.11　企业节能宣传教育和培训情况 4.12　企业开展能效水平对标达标工作情况 4.13　企业建立能源管理体系情况

Technical specifications of energy conservation supervision for tyre industry

GSO ISO 9413:2022 轮胎气门嘴 尺寸和名称

This document defines the essential dimensions and the designation of tube valves and tubeless valves. Annex B gives the correspondence between ISO designations and the designations established by: — TRA (Tire and Rim Association Inc.); — ETRTO (European Tyre and Rim Technical Organisation); — JATMA (The Japan Automotive Tyre Manufacturer's Association, Inc.). In the remainder of this document, all the dimensions are given at their nominal value except in cases where the tolerances are indicated. The threaded length of valve stems for which no thread length is specified is the maximum possible length. NOTE The drawings for valves are not all at the same scale.

Tyre valves — Dimensions and designation

KS M ISO 13326-2022 测量轮胎均匀性的试验方法

Test methods for measuring tyre uniformity

KS M ISO 3877-3-2022 轮胎、阀门和内胎 ?等效术语列表 ?第3部分：管

Tyres, valves and tubes ? List of equivalent terms ? Part 3: Tubes

JIS K 6370:2022 用于翻新和修理的复合原料

Compounded stock for retread and repair

BS ISO 18885-3:2021 TPMS 卡入式阀门 演出

1   Scope This document specifies test methods for TPMS snap-in tubeless valves that determine the minimum level of performances requested.

TPMS snap-in valves. Performances

ISO 18885-3:2021 TPMS卡扣阀.第3部分:性能

This document specifies test methods for TPMS snap-in tubeless valves that determine the minimum level of performances requested.

TPMS snap-in valves — Part 3: Performances

KS M 6750-2021 汽车轮胎

Automobile tyres

KS M ISO 14960-2-2021 无内胎轮胎 ─ 气门嘴和组件 ─ 第2部分：夹紧式无内胎轮胎气门嘴测试方法

Tubeless tyres ─ Valves and components ─ Part 2: Clamp-in tubeless tyre valve-test methods

KS M ISO 14960-1-2021 无内胎轮胎 ─ 阀门和组件 ─ 第1部分：测试方法

Tubeless tyres ─ Valves and components ─ Part 1: Test methods

GSO ISO 17464:2021 汽车用气压管技术要求和试验方法

ISO 17464:2016 specifies the technical requirements and test methods for tubes of pneumatic tyres for automotive vehicles.

Pneumatic tubes for automotive vehicles — Technical requirements and test methods

T/CMA 030-2021 雪地压实指数的测量方法

范围：（1）本文件规定了雪地压实指数的测量方法的术语和定义、测试仪器的使用方法和设备校准。 （2）本文件适用于使用雪地硬度测试仪对雪地测试道路压实指数的测量。 主要内容：使用方法 5.1 使用时圆球和测量杆由带有法兰端的导轨按预定的高度自由落体到需试验的表面，其动能转换为垂直方向的插入和水平方向的压缩。插入距离直接由手持刻度尺读出数字（50～100）来表征。 5.2 现场使用雪地硬度测试仪时，应将仪器放置在雪面上以保证仪器金属部分与雪面有相同的温度，每次测量后都要将测量杆头部擦拭干净来保证仪器内部不能有过多的雪花。 5.3 如果有其他因素导致仪器内部有雪花，最好的办法是让雪花融化而不是将仪器拆卸开。 5.4 如果一定要拆卸开仪器，切记明确所有部件在拆卸之前的位置。 5.5 包括测量顶部的滚花螺母，整个仪器在实验室内将重量调整为220g±1g，测量杆的高度调整范围为218.9mm±0.25mm。 5.6 考虑仪器温度变化仪器底座有雪附着影响数据，在使用雪地硬度测试仪前应将仪器在室外放置3至5分钟。 5.7 使用前轮装有普通轮胎的车辆驶过试验场地，然后将车辆挪开，使刚才的轮胎印痕暴露出来，将仪器放置在轮胎印痕中央，提起测量杆，将仪器轻轻转动45°再转回，将轮胎花纹印痕抹平。保持测量杆在下落导管的上部，轻压仪器的铝合金底板以保持位置不变动且不陷入雪花中。 5.8 放开自由落体式测量杆，立即在靠近滚花螺母边上的下落导管顶端放好标有刻度的测量尺，读出刻度上的雪地硬度测试仪的数值。 5.9 本条规定了雪地压实指数的测量位置。

Measuring method of snow compaction index