91.100.40 纤维增强水泥制品 标准查询与下载
共找到 361 条与 纤维增强水泥制品 相关的标准，共 25 页
Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units
- ICS
- 91.100.40
- CCS
- 发布
- 2018-07-01
- 实施
1.1 This practice covers encapsulants intended to reduce or eliminate the release of asbestos fibers from a matrix of friable sprayor trowel-applied asbestos-containing surfacing material. 1.2 This practice includes a series of determinations to be conducted in the field on asbestos abatement projects for which encapsulation is being considered or has been performed. 1.3 This practice is to be used to determine the appropriateness of encapsulation as an abatement measure in accordance with Practice E1368, as part of a Project Design Survey in accordance with Practice E2356, and to demonstrate completeness of abatement in accordance with Practice E1368. Performance of the encapsulated surfacing material for other purposes is not within the scope of this practice. Use Test Methods E84, E119, and E605 to determine other properties of the material. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 Warning—Asbestos fibers are acknowledged carcinogens. Breathing asbestos fibers can result in disease of the lungs including asbestosis, lung cancer, and mesothelioma.2 Precautions in this standard practice should be taken to avoid creating and breathing airborne particles from materials known or suspected to contain asbestos. See 2.3 for regulatory requirements addressing asbestos. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Testing Physical Properties of Friable Surfacing Materials
- ICS
- 91.100.40
- CCS
- 发布
- 2018-07-01
- 实施
What is BS EN 492 - Fibre-cement slates and fittings about? BS EN 492 is the European standard on the roof covering products for discontinuous laying and products for wall cladding. BS EN 492 specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses: Roofing
Fibre-cement slates and fittings. Product specification and test methods
- ICS
- 91.100.40
- CCS
- 发布
- 2018-06-30
- 实施
- 2018-06-30
本标准规定了高延性纤维增强水泥基复合材料的术语和定义、试件制作方法、立方体抗压强度、轴心抗压强度、静力受压弹性模量、抗折强度、初裂抗拉强度、极限抗拉强度、极限延伸率、平均裂缝间距和平均裂缝宽度试验方法。 本标准适用于预制和现场浇筑的高延性纤维增强水泥基复合材料。
Standard test method for the mechanical properties of ductile fiber reinforced cementitious composites
- ICS
- 91.100.40
- CCS
- Q14
- 发布
- 2018-04-30
- 实施
- 2018-09-01
本部分规定了温石棉硅酸钙板(简称石棉硅钙板)的术语和定义、分类、等级、规格和标记、原材料、要求、试验方法、检验规则、标志与合格证、运输、包装和贮存。 本部分石棉硅钙板适用于非限制使用石棉的场所。
Fiber reinforced calcium silicate boards.Part 2: Asbetos calcium silicate boards
- ICS
- 91.100.40
- CCS
- Q14
- 发布
- 2018-04-30
- 实施
- 2018-09-01
本部分规定了无石棉硅酸钙板(简称无棉硅钙板)的术语和定义、分类、等级、规格和标记、原材料、要求、试验方法、检验规则以及标志与合格证、运输、包装和贮存。 本部分适用于作为建筑物内墙板、外墙板、吊顶板、车厢、海上建筑、船舶内隔板及复合保温板面板等兼有防火、隔热、防潮等要求的无棉硅钙板，也可适用于家装等其他用途的无棉硅钙板。
Fiber reinforced calcium silicate boards.Part 1: Non-asbestos calcium silicate boards
- ICS
- 91.100.40
- CCS
- Q14
- 发布
- 2018-04-30
- 实施
- 2018-09-01
本部分规定了温石棉纤维水泥平板(简称石棉板)的术语和定义、分类、等级、规格和标记、原材料、要求、试验方法、检验规则、标志与合格证、运输、包装和贮存。 本部分适用于非限制使用石棉的场所。
Fiber cement flat sheets.Part 2: Asbetos fiber cement flat sheets
- ICS
- 91.100.40
- CCS
- Q14
- 发布
- 2018-04-30
- 实施
- 2018-09-01
Fibre-reinforced polymer(FRP) reinforcement of concrete – Specifications of FRP sheets
- ICS
- 91.100.40
- CCS
- 发布
- 2017-10-17
- 实施
Fibre-reinforced polymer(FRP) reinforcement of concrete – Specifications of FRP sheets
- ICS
- 91.100.40
- CCS
- 发布
- 2017-10-17
- 实施
Fibre-reinforced polymer(FRP) reinforcement of concrete – Specifications of FRP sheets
- ICS
- 91.100.40
- CCS
- 发布
- 2017-10-17
- 实施
Standard Specification for Fiber-Cement Interior Substrate Sheets
- ICS
- 91.100.40
- CCS
- 发布
- 2017-07-01
- 实施
Basalt fiber reinforced volcanic cinder hollow slats for construction
- ICS
- 91.100.40
- CCS
- Q 23
- 发布
- 2017-06-12
- 实施
- 2017-08-12
1.1 This specification covers non-asbestos fiber-mat reinforced cementitious backer units manufactured to be dimensionally stable and suitable as either an unfinished substrate (see Note 1) or as a substrate for decoration such as natural stone or tile on walls, floors, or decks in wet and dry areas. It is also suitable to be used as a substrate in the Application of Class PB Exterior Insulation Finish Systems (Practice C1397), the Application of Direct-Applied Finish Systems (Practice C1516), and the Application of Exterior Insulation Finish Systems Class PI (Practice C1535). NOTE 1—When used as an unfinished substrate, consult the manufacturer’s written installation literature for proper application details. 1.2 This specification is not applicable to asbestos-cement flat sheets (Specification C220); non-asbestos fiber cement flat sheets for exterior applications such as claddings, facades, curtain walls, and soffits (Specification C1186); gypsum backing board, coreboard, and shaftliner (Specification C1396/ C1396M); water-resistant gypsum backing board (Specification C1396/C1396M); glass mat gypsum backing board (Specification C1178/C1178M); particle boards (Definitions D1554); and discrete non-asbestos fiber cement interior substrate sheets (Specification C1288). 1.3 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
- ICS
- 91.100.40
- CCS
- 发布
- 2017-06-01
- 实施
This document specifies methods for the inspection and testing of fibre-cement flat sheets and provides the acceptance conditions for their use in one or more of the following applications: — external wall and ceiling finishes; — internal wall and ceiling finishes; — internal and external backing sheets. Products covered by this document can be used for other purposes, provided they comply with the appropriate national or international application code or standard. NOTE 1 This document does not apply to sheets for fire protection purposes. NOTE 3 This document does not apply to the following products: NOTE 2 This document does not include calculations for installation design requirements, wind uplift or water proofing of the installed sheets. — boards of Portland or equivalent cement reinforced with fibrous wood particles; — sheets containing asbestos fibre reinforcement; — — — fibre-reinforced boards of calcium silicate or cement for thermal insulation or fire protection; sheets containing steel fibre reinforcement; fibre-cement roofing slates.
Fibre-cement flat sheets - Product specification and test methods
- ICS
- 91.100.40
- CCS
- Q72
- 发布
- 2017-06
- 实施
Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
- ICS
- 91.100.40
- CCS
- 发布
- 2017-01-01
- 实施
General test conditions of polystyrene composite wood wool cement boards
- ICS
- 91.100.40
- CCS
- 发布
- 2016-12-28
- 实施
Measuring method for the chloride ion content of polystyrene composite wood wool cement boards
- ICS
- 91.100.40
- CCS
- 发布
- 2016-12-28
- 实施
Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
- ICS
- 91.100.40
- CCS
- 发布
- 2016-12-28
- 实施
Testing method for transverse tensile strength of polystyrene composite wood wool cement boards
- ICS
- 91.100.40
- CCS
- 发布
- 2016-12-28
- 实施
Measuring method for dimensions and squareness of polystyrene composite wood wool cement boards
- ICS
- 91.100.40
- CCS
- 发布
- 2016-12-28
- 实施
