91.100.40 纤维增强水泥制品 标准查询与下载
共找到 361 条与 纤维增强水泥制品 相关的标准，共 25 页
本标准规定了内衬PVC片材混凝土和钢筋混凝土排水管的术语和定义、产品分类、原材料、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及出厂证明书。本标准适用于采用GB/T 11836和JC/T 640所述成型工艺生产的内衬PVC片材混凝土和钢筋混凝土排水管。本标准适用于雨水、污水、引水及农田排灌等重力流管道的管子,尤其适用于输送腐蚀性介质管道的管子。生产其他用途的内衬PVC片材混凝土和钢筋混凝土排水管,可由供需双方协商,并参照本标准执行。按本标准生产的管子适用于开槽施工、顶进施工及其他施工方法。
PVC lining concrete and reinforced concrete sewer pipe
- ICS
- 91.100.40
- CCS
- Q14
- 发布
- 2014-10-14
- 实施
- 2015-04-01
本标准规定了现浇混凝土空心楼盖用填充体的术语和定义、分类、规格尺寸和标记、材料、要求、试验方法、检验规则以及标志、堆放和运输。本标准适用于工业与民用建筑中现浇混凝土空心楼盖用填充体。该填充体永久填充在现浇混凝土空心楼盖内,其作用是仅为在现浇混凝土楼盖内实现按建筑结构要求形成的空心,而不参与任何结构受力。
Filler for cast-in-situ concrete hollow floor
- ICS
- 91.100.40
- CCS
- Q93
- 发布
- 2014-10-14
- 实施
- 2015-04-01
이 표준은 석면 이외의 섬유로 강화 성형한 슬레이트(골판 및 보드), 규산칼슘판 및 슬래그 석고판(이하 섬유강화 시멘트판이라 한다.)에 대하여 규정한다.
Fiber reinforced cement boards
- ICS
- 91.100.40
- CCS
- Q11
- 发布
- 2014-04-07
- 实施
- 2014-04-07
1.1 This specification covers either untextured or surface textured fiber-cement flat sheets intended for exterior applications such as claddings, facades, curtain walls, soffits, and so forth. 1.2 This specification is not applicable to asbestos-cement flat sheets (Specification C220), gypsum-based boards (Specifications C1396/C1396M, C1177/C1177M, C1178/C1178M), or particle boards (Terminology D1554) discrete non-asbestos fiber-cement interior substrate sheets (Specification C1288), fiber-mat reinforced non-asbestos cement interior substrate sheets (Specification C1325), or cement-bonded particleboards (Specification BS 5669: Part 4) and (ISO 8335). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
Standard Specification for Flat Fiber-Cement Sheets
- ICS
- 91.100.40
- CCS
- 发布
- 2014-04-02
- 实施
1.1 This specification covers fiber-cement shingles, shakes, and slates (roofing products) of nominally uniform thickness (non-tapered) and texture, including accessories designed to provide the weather-exposed surfaces on roofs of buildings. 1.2 This specification is not applicable to asbestos-cement roofing shingles (Specification C222), non-asbestos fibercement roofing shakes, shingles, and slates with designed varying profiles and thicknesses (Specification C1530), particle board (Terminology D1554), or cement-bonded particleboards (Specification BS 5669: Part 4) and (ISO 8335). 1.3 This specification does not include details of product installation or installed system performance. Refer to the manufacturer’s installation literature for proper installation instructions, to Specification C1459 for roofing systems performance, and to Test Methods E108 for levels of fire resistance. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
- ICS
- 91.100.40
- CCS
- 发布
- 2014-04-02
- 实施
Standard test method for flexural performance of fiber reinforced concrete
- ICS
- 91.100.40
- CCS
- 发布
- 2014-03-17
- 实施
이 표준은 3등분점 하중에 의한 섬유 보강 콘크리트 및 섬유 보강 숏크리트의 휨성능 시험방법에 대하여 규정한다.
Standard test method for flexural performance of fiber reinforced concrete
- ICS
- 91.100.40
- CCS
- Q14
- 发布
- 2014-03-17
- 实施
- 2014/3/17
1.1 This specification covers discrete non-asbestos fiber-cement sheets manufactured to be dimensionally stable and suitable for decoration as paint, wallpaper, natural stone, tile, or resilient flooring in internal wet and dry areas. 1.2 This specification is not applicable to asbestos-cement flat sheets (Specification C220), non-asbestos fiber cement flat sheets for exterior applications such as claddings, facades, curtain walls, and soffits (Specification C1186), gypsum backing board and coreboard (Specification C1396/C1396M), water-resistant gypsum backing board (Specification C1396/C1396M), glass mat gypsum backing board (Specification C1178/C1178M), particle boards (Definitions D1554), fiber mat cement boards (Specification C1325 and ANSI A118.9), or cement-bonded particleboards (Specification BS 5669: Part 4) and (ISO 8335). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
- ICS
- 91.100.40
- CCS
- 发布
- 2014
- 实施
This International Standard specifies the properties of the piping system and its components made from fibre-reinforced cement, based upon Portland cement, intended to be used for drainage or sewerage systems. This International Standard is applicable to fibre-reinforced cement pipes and fittings suitable primarily for use in gravity systems at atmospheric pressure in buried applications. Pipes satisfying the requirements of this International Standard, although exhibiting some flexible characteristics, are intended for installations designed using rigid pipe principles. NOTE 1 In a pipe work system, pipes and fittings of different strength classification can be used together. NOTE 2 Piping systems conforming to this International Standard can be used also for non-buried applications provided the influences of the environment and the supports are considered in the design of the pipes, fittings and joints. NOTE3 This International Standard addresses aspects of long-term performance of pipe (see Annex J). NOTE 4 Purchasers should satisfy themselves that the class of pipe specified on the basis of this International Standard is suitable for its intended application. NOTE 5 Compliance with Annex G of this International Standard might not satisfy national regulatory requirements.
Fibre-reinforced cement pipe, joints and fittings for gravity systems
- ICS
- 91.100.40
- CCS
- 发布
- 2013-12-31
- 实施
本标准规定了盾构施工法隧道用预制混凝土衬砌管片（以下简称管片）的术语和定义、分类、形状 与规格标记、原材料、混凝土配合比、生产工艺、检验与验收、成品保护、标志与出厂证明书。 本标准适用于以钢筋、混凝土为主要原材料制成的轨道交通隧道工程用预制混凝土衬砌管片的生产 和验收，公路、电力、水利等其它工程参照执行。
Precast Concrete Lining Segments for Rail Transit Construction Engineering
- ICS
- 91.100.40
- CCS
- Q 14
- 发布
- 2013-08-28
- 实施
- 2013-09-28
Vinyl resin integral cast electrolyzer
- ICS
- 91.100.40
- CCS
- Q23
- 发布
- 2013/06/15
- 实施
- 2013/06/15
This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses:- roofing;- internal wal
Fibre-cement slates and fittings - Product specification and test methods
- ICS
- 91.100.40
- CCS
- 发布
- 2013-02-21
- 实施
- 2013-02-21
Fibre-cement profiled sheets and fittings - Product specification and test methods
- ICS
- 91.100.40
- CCS
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Fibre-cement slates and fittings - Product specification and test methods
- ICS
- 91.100.40
- CCS
- 发布
- 2013-01-31
- 实施
- 2013-01-31
This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement profiled sheets and their fibre-cement fittings for one or more of the following uses:- roofing;- int
Fibre-cement profiled sheets and fittings - Product specification and test methods
- ICS
- 91.100.40
- CCS
- 发布
- 2013-01-25
- 实施
- 2013-01-25
This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement profiled sheets and their fibre-cement fittings for one or more of the following uses: —roofing; —internal wall finishes; —external wall and ceiling finishes.
Fibre-cement profiled sheets and fittings.Product specification and test methods; German version EN 494:2012
- ICS
- 91.100.40
- CCS
- Q23
- 发布
- 2013-01
- 实施
Fibre-cement flat sheets - Product specification and test methods
- ICS
- 91.100.40
- CCS
- 发布
- 2012-12-21
- 实施
- 2012-12-21
