A21 环境条件与通用试验方法 标准查询与下载

IEC 60068-2-18:2017 环境试验 第2-18部分:试验 随机试验指南 水

This part of IEC 60068 provides methods of test applicable to products which, during transportation, storage or in service, can be subjected to falling water drops, impacting water, immersion or high pressure water impact. The primary purpose of water tests is to verify the ability of enclosures, covers and seals to maintain components and equipment in good working order after and, when necessary, under a standardized drop field or immersion in water. These tests are not corrosion tests and cannot be considered and used as such. Established water tests in other standards are not intended to simulate natural rainfall and their quoted intensities are too high to be adopted for that purpose. Therefore, in addition to the high-intensity severities, test R includes an artificial rain test based upon natural conditions but not taking into account high wind speeds generally associated with natural rain. Guidance is given on the applicability of the tests and the severities to be selected.

Environmental testing - Part 2-18: Tests - Test R and guidance: Water

IEC 60068-2-69:2017 环境试验. 第2-69部分: 试验. 试验Te/Tc: 采用湿平衡(力值测量)法的电子元件和印制板焊接性试验

This part of IEC 60068 outlines test Te/Tc, the solder bath wetting balance method and the solder globule wetting balance method to determine, quantitatively, the solderability of the terminations. Data obtained by these methods are not intended to be used as absolute quantitative data for pass-fail purposes. The procedures describe the solder bath wetting balance method and the solder globule wetting balance method. They are applicable to components and printed boards with metallic terminations and metallized solder pads. This document provides the measurement procedures for solder alloys both with and without lead (Pb).

Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

JIS C 60068-2-58:2016 环境试验.第2-58部分:试验.试验Td:表面安装元器件(SMD)用可焊性、耐金属化溶融和耐焊接热试验方法

Environmental testing -- Part 2-58: Tests -- Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

DB45/T 1400-2016 食品、药品储运环境温湿度监控性能验证技术规范

Technical specification for temperature and humidity monitoring performance verification of food and drug storage and transportation environment

BS EN 60068-3-13:2016 环境测试 T. 焊接测试的支持文档和指南

Environmental testing. Supporting documentation and guidance on Test T. Soldering

DIN EN 60068-2-39:2016 环境试验.试验.第2-39部分:试验和指南: 通过低气压试验获得的结合温度或者温度和湿度(IEC 60068-2-39-2015).德文版本EN 60068-2-39-2016

Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 60068-2-39:2015); German version EN 60068-2-39:2016

DIN EN 300019-2-3:2016 环境工程(EE).电信设备的环境条件和环境试验.第2-3部分:环境试验规范;抗大气影响场所用固定设备(作为德国标准的英文版本EN 300019-2-3 V2.4.1 (2015-12)核准)

Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations (Endorsement of the English version EN 300 01

DIN EN 60068-2-60:2016 环境试验.第2-60部分:试验.试验ke:流动混合气体腐蚀试验(IEC 60068-2-60-2015).德文版本EN 60068-2-60-2015

Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test (IEC 60068-2-60:2015); German version EN 60068-2-60:2015

JIS C 60068-1:2016 环境试验.第1部分:总则和指南

Environmental testing -- Part 1: General and guidance

JIS C 60068-3-1:2016 环境试验. 第3-1部分: 支持文件和指南. 低温和干热试验

Environmental testing -- Part 3-1: Supporting documentation and guidance -- Cold and dry heat tests

SJ/T 11200-2016 环境试验 2-58部分：试验 试验Td：表面组装元器件可焊性、金属化层耐溶蚀性和耐焊接热的试验方法

Environmental Testing Part 2-58: Test Test Td: Test Method for Solderability, Metallized Layer Corrosion Resistance and Soldering Heat Resistance of Surface Mount Components

DIN EN 60721-2-2:2016 环境条件分类.第2-2部分:自然界出现的环境条件.降水和风(IEC 60721-2-2-2012).德文版本EN 60721-2-2-2013

Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind (IEC 60721-2-2:2012); German version EN 60721-2-2:2013

BS EN 60068-2-39:2016 环境测试 测试 测试和指导：结合温度或温度和湿度与低气压测试

Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

JIS Z 2371 ERRATUM 1:2016 勘误

ERRATUM

DIN EN 60068-2-58:2016 环境试验.第2-58部分:试验.试验Td:表面安装设备(SMD)的可焊性、耐金属化溶融和耐焊接热的试验方法(IEC 60068-2-58-2015);德文版本EN 60068-2-58-2015

Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 60068-2-58:2015); German version EN 60068-2-58:2015

BS EN 60068-2-60:2015 环境测试 测试 试验Ke：流动混合气体腐蚀试验

Environmental testing. Tests. Test Ke: Flowing mixed gas corrosion test

ISO 21207:2015 人工气候下的腐蚀试验.包括交替暴露于腐蚀促进气体、中性盐雾和干燥中的加速腐蚀试验

This International Standard defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing salt, and of corrosion-promoting gases from industrial or traffic air pollution. This International Standard specifies both the test apparatus and test procedures to be used in executing the accelerated corrosion tests. The methods are especially suitable for assessing the corrosion resistance of sensitive products with metals, e.g. electronic components, used in traffic and industrial environments.

Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying

DIN EN 60068-2-57:2015 环境试验. 第2-57部分: 实验. 试验Ff: 振动. 时域和正弦拍频法 (IEC 60068-2-57-2013); 德文版本EN 60068-2-57-2013

Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method (IEC 60068-2-57:2013); German version EN 60068-2-57:2013

DIN EN 60068-1:2015 基本环境试验程序.第1部分:总则和导则(IEC 60068-1-2013);德文版本EN 60068-1-2014

Environmental testing - Part 1: General and guidance (IEC 60068-1:2013); German version EN 60068-1:2014

MH/T 6111-2015 机场道面除冰防冰剂融冰能力试验方法

本标准规定了机场道面除冰防冰剂(以下简称除冰防冰剂)融冰能力的测试方法。本标准适用于测试固体或液体除冰防冰剂的融冰能力。

Ice melting test method for runways and taxiways deicing/anti-icing chemicals