C85 消防救生、辅助工具 标准查询与下载

GOST R 53268-2009 消防设备.消防安全带.一般技术要求.试验方法

Fire equipment. Fire safety belt. General technical requirements. Test methods

GOST R 53269-2009 消防设备.消防员头盔.一般技术要求.试验方法

Fire equipment. Helmets for firefighters. General technical requirements. Test methods

GOST R 53271-2009 消防设备.消防救生滑槽.一般技术要求.试验方法

Fire equipment. Fire escape chute. General technical requirements. Test methods

GOST R 53270-2009 消防设备.消防提灯.一般技术要求.试验方法

Fire equipment. Fire lantern. General technical requirements. Test methods

GOST R 53267-2009 消防设备.消防弹力挂钩.一般技术要求.试验方法

Fire equipment. Fire snap hook. General technical requirements. Test methods

BS EN ISO 14116:2008 防护服.耐热和防火.限制火焰蔓延的材料、材料组件和衣服

This International Standard specifies the performance requirements for the limited flame spread properties of materials, material assemblies and protective clothing in order to reduce the possibility of the clothing burning and thereby itself constituting a hazard. Additional requirements for clothing are also specified. Protective clothing complying with this International Standard is intended to protect workers against occasional and brief contact with small igniting flames, in circumstances where there is no significant heat hazard and without the presence of another type of heat. When protection against heat hazards is necessary in addition to protection against limited spread flammability, then standards, such as ISO 11612, are more appropriate. A classification system is given for materials, material assemblies and garments which are tested according to ISO 15025:2000, Procedure A.

Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing

DIN 14751-5:2008 消防队用液压驱动营救工具.第5部分:单一作用力液压营救工具

Hydraulically operated rescue tools for fire brigade use - Part 5: Single acting hydraulic rescue tools

SAE AS8048-2008 乘客用烟雾和毒气呼吸保护设备的性能标准

Performance Standard for Passenger Smoke and Toxic Fumes Respiratory Protective Equipment

SANS 50443:2008 建筑物或其它构筑物内使用的消防头盔

Specifies minimum requirements for fire fighters' helmets protecting the upper head mainly against the effects of impact, penetration, heat and flame, whilst firefighting in buildings and other structures.

Helmets for fire fighting in buildings and other structures

DIN EN ISO 14116:2008 防护服装.防隔热和防火焰.限制火焰蔓延的材料、材料组件及衣服

This International Standard specifies the performance requirements for the limited flame spread properties of materials, material assemblies and protective clothing in order to reduce the possibility of the clothing burning and thereby itself constituting a hazard. Additional requirements for clothing are also specified. Protective clothing complying with this International Standard is intended to protect workers against occasional and brief contact with small igniting flames, in circumstances where there is no significant heat hazard and without the presence of another type of heat. When protection against heat hazards is necessary in addition to protection against limited spread flammability, then standards, such as ISO 11612, are more appropriate. A classification system is given for materials, material assemblies and garments which are tested according to ISO 15025:2000, Procedure A.

Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2008); German version EN ISO 14116:2008

DIN EN 659:2008 消防员用防护手套

This European Standard defines minimum performance requirements and test methods for firefighters' protective gloves. This European Standard applies only to firefighters' protective gloves which protect the hands during normal firefighting, including search and rescue. These gloves are not intended for deliberate handling of liquid chemicals, but provide some protection against accidental contact with chemicals. Protective gloves for special operations within firefighting service are excluded from the scope of this standard.

Protective gloves for firefighters(includes Amendment A1:2008); English version of DIN EN 659:2008-06

DIN EN 443:2008 建筑和其它结构用防火头盔

This European Standard specifies minimum requirements for firefighters' helmets protecting the upper head mainly against the effects of impact, penetration and heat and flame, whilst firefighting in buildings and other structures.

Helmets for fire fighting in buildings and other structures; English version of DIN EN 443:2008-06

BS EN 443:2008 建筑和其它机构用防火头盔

This European Standard specifies minimum requirements for firefighters' helmets protecting the upper head mainly against the effects of impact, penetration and heat and flame, whilst firefighting in buildings and other structures.

Helmets for fire fighting in buildings and other structures

BS EN 1486:2007 消防人员防护服.特制防火专用反射服的检验方法和要求

This European Standard considers requirements for the protection of the whole body including head, hands and feet. Clothing for head and feet according to this European Standard, however, may only provide sufficient protection when worn together with such basic PPE specified in the relevant standards as noted in paragraphs 4.2 and 4.4 of this European Standard. This European Standard specifies test methods and minimum performance requirements for reflective protective clothing used in specialised fire-fighting. This clothing provides protection against flame lick and intense radiant heat and is worn for short periods only, to enable the fire-fighter to enter specific high-risk fire-fighting and fire rescue situations which also require the use of breathing apparatus. This European Standard only covers protective clothing that relies upon the ability of the outer material to reflect intense radiant heat. This type of reflective clothing may also be used for industrial applications involving high levels of radiant heat. The reflective clothing specified in this European Standard is not covered in EN 469.

Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialized fire-fighting

BS EN 13731:2007 消防和营救用提升气垫系统.安全和性能要求

This European Standard specifies requirements for lifting bag systems, where intended operation is inflation by compressed air and used primarily by fire and rescue services. This European Standard applies to lifting bag systems including some or all of the following components:  hose assemblies and couplings;  regulators;  control devices;  pressure indicators;  safety valves;  lifting bags. This European Standard applies to lifting bag systems intended for operation under ambient temperatures between -20 °C and 55 °C. This European Standard deals with all significant hazards, hazardous situations and events during the commissioning, operation and maintenance arising from a lifting bag system when it is used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies minimum performance requirements and test methods for lifting bag systems. This European Standard does not establish the additional requirements for: a) operation in severe conditions ( e.g. extreme environmental conditions such as: temperatures outside the range from -20 °C to + 55 °C, corrosive environment, tropical environment, contaminating environments, strong magnetic fields, potentially explosive atmospheres); NOTE 1 If use of the lifting bag system is foreseen in severe conditions, this should be agreed between the purchaser and the manufacturer at the time of ordering. In this case an additional risk analysis should be carried out. Additional measures and additional information for use may be necessary. b) risk directly arising from any means for handling or transportation of the lifting bag system by equipment other than that designed as part of the lifting bag; c) lifting bag systems manufactured for specialized use, e.g. the lifting of persons or heavy recovery where exceptional stroke movement is required; d) any hazard arising from the source of compressed air, except where this is a manually operated air pump. NOTE 2 Where the source is from an air compressor or from a pressurised cylinder or other similar source, it is assumed that the source conforms to an appropriate European Standard or legislation. This European Standard is not dealing with noise, as it is not considered to be a significant hazard. This European Standard is not applicable to lifting bag systems which are manufactured before the date of its publication by CEN.

Lifting bag systems for fire and rescue service use - Safety and peformance requirements

DIN EN 13731:2008 消防和营救设备用提升气垫系统.安全和性能要求

This European Standard specifies requirements for lifting bag systems, where intended operation is inflation by compressed air and used primarily by fire and rescue services. This European Standard applies to lifting bag systems including some or all of the following components: -- hose assemblies and couplings; -- regulators; -- control devices; -- pressure indicators; -- safety valves; -- lifting bags. This European Standard applies to lifting bag systems intended for operation under ambient temperatures between -20 ~C and 55 ~C. This European Standard deals with all significant hazards, hazardous situations and events during the commissioning, operation and maintenance arising from a lifting bag system when it is used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies minimum performance requirements and test methods for lifting bag systems. This European Standard does not establish the additional requirements for: a) operation in severe conditions ( e.g. extreme environmental conditions such as: temperatures outside the range from -20 ~C to + 55 ~C, corrosive environment, tropical environment, contaminating environments, strong magnetic fields, potentially explosive atmospheres); NOTE 1 If use of the lifting bag system is foreseen in severe conditions, this should be agreed between the purchaser and the manufacturer at the time of ordering. In this case an additional risk analysis should be carried out. Additional measures and additional information for use may be necessary. b) risk directly arising from any means for handling or transportation of the lifting bag system by equipment other than that designed as part of the lifting bag; c) lifting bag systems manufactured for specialized use, e.g. the lifting of persons or heavy recovery where exceptional stroke movement is required; d) any hazard arising from the source of compressed air, except where this is a manually operated air pump. NOTE 2 Where the source is from an air compressor or from a pressurised cylinder or other similar source, it is assumed that the source conforms to an appropriate European Standard or legislation. This European Standard is not dealing with noise, as it is not considered to be a significant hazard. This European Standard is not applicable to lifting bag systems which are manufactured before the date of its publication by CEN.

Lifting bag systems for fire and rescue service use - Safety and performance requirements; English version of DIN EN 13731:2008-02

DIN EN 1486:2008 消防人员用防护衣服.专门防火用反射服的试验方法和要求

This European Standard considers requirements for the protection of the whole body including head, hands and feet. Clothing for head and feet according to this European Standard, however, may only provide sufficient protection when worn together with such basic PPE specified in the relevant standards as noted in paragraphs 4.2 and 44 of this European Standard. This European Standard specifies test methods and minimum performance requirements for reflective protective clothing used in specialised fire-fighting. This clothing provides protection against flame lick and intense radiant heat and is worn for short periods only, to enable the fire-fighter to enter specific high-risk fire-fighting and fire rescue situations which also require the use of breathing apparatus. This European Standard only covers protective clothing that relies upon the ability of the outer material to reflect intense radiant heat. This type of reflective clothing may also be used for industrial applications involving high levels of radiant heat. The reflective clothing specified in this European Standard is not covered in EN 469.

Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting; English version of DIN EN 1486:2008-01

ANSI/NFPA 1852-2008 开路独立式呼吸装置(SCBA)的选择、保养和维修标准

This standard shall specify minimum requirements for the selection, care, and maintenance of open-circuit self-contained breathing apparatus (SCBA) and combination SCBA/SAR that are used for respiratory protection during fire fighting, rescue, and other hazardous operations.This standard shall specify the requirements for SCBA models as detailed in Section 1.3.This standard shall specify the requirements for SCBA that are equipped with SCBA-integrated Personal Alert Safety Systems (PASS), also certified as compliant with NFPA 1982, Standard on Personal Alert Safety Systems (PASS), as applicable 1.1.4 This standard shall specify the requirements for the SCBA selection, care, and maintenance component of the respiratory protection program required by NFPA 1500, Standard on Fire Department Occupational Safety and Health Program.This standard shall not specify requirements for any closed-circuit SCBA.This standard shall not specify requirements for other respiratory protection program components of the organization such as SCBA training, appropriate use of SCBA for operations, and breathing air quality as these program components are under the jurisdiction of other NFPA standards. This standard shall not specify requirements for accessories attached to the SCBA unless specifically addressed herein.Nothing herein shall restrict any jurisdiction from exceeding these minimum requirements.

Standard on Selection, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA)

ANSI/NFPA 1989-2008 消防用应急呼吸保护装置的呼吸空气质量的标准

This standard shall specify the minimum requirements for breathing air quality for fire and emergency services organizations that use atmosphere-supplying respirators.This standard shall specify the requirements for the breathing air quality component of the respiratory protection program required by NFPA 1500, Standard on Fire Department Occupational Safety and Health Program. This standard shall not specify requirements for air quality for any other applications.This standard shall not specify requirements for medical-grade oxygen.This standard shall not be construed as addressing all of the safety concerns, if any, associated with its use. It shall be the responsibility of the persons and organizations that use this standard to establish safety and health practices and determine the applicability of regulatory limitations prior to use of this standard.Nothing herein shall restrict any jurisdiction or breathing air provider from exceeding these minimum requirements.

Standard on Breathing Air Quality for Emergency Services Respiratory Protection

NF S74-553:2007 消防队用防护服装.实验室试验方法和野外服装的性能要求

Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing.