D92 采掘设备 标准查询与下载

NF E56-003-3/IN1:2010 地下采矿用机械.液压矿顶支撑物的安全要求.第3部分:液压控制系统

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3 : hydraulic control systems.

NF E56-003-1:2010 地下采矿用机械.液压矿顶支撑物的安全要求.第1部分:支撑装置和一般要求

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements.

JB/T 3968-2010 矿用耙斗

本标准规定了矿用耙斗的型式、基本参数、技术要求、试验方法、包装、运输和贮存。 本标准适用于与耙矿绞车配套使用的耙斗。

Mining scraper

JB/T 10173-2010 现场混装炸药车 移动式地面辅助设施

本标准规定了现场混装炸药车移动式地面辅助设施产品的术语和定义、产品分类、型号编制、要求、试验方法、检验规则、标牌、标志、使用说明书、包装、运输和贮存的要求。 本标准适用于现场混装炸药车移动式地面辅助设施。本设施包括生活车、动力车、原料制备车等，该设施适用于现场混装炸药车。

Mobile groud auxilia for site mixed and charged explosive truck

DIN EN 12348:2010 立式岩芯钻机.安全性.德文版本EN 12348-2000+A1-2009

This standard applies to core drilling machines on transportable stand, generally with water supply, used to drill into stone, concrete and similar materials. This standard applies to core drilling machines equipped with a diamond core drill bit, intended to drill holes in stationary position.

Core drilling machines on stand - Safety; German version EN 12348:2000+A1:2009

BS CWA 15044:2009 采矿机械的评价和试验

Test and evaluation of demining machines

DIN EN 815:2009 岩石用无护平巷掘进机和无杆轴掘进机的安全.安全要求,德文版本 EN 815:1996+A2:2008

This standard is applicable to unshieldsed tunnel boring machines, TBM's, and rodless shaft boring machines, SBM's, and their towed or attached back-up equipment for driving tunnels or shafts in rock where the whole area is excavated in one or more steps by mechanical means. It specifies essential safety requirements for the design, construction and maintenance of such machines when used in non-explosive atmosphere together with the methods of verification. The standard specifies monitoring for hazardous atmosphere. For TBM's and SBM's which are to be used continuously in explosive atmosphere, additional relevant standards also apply. This European Standard deals with all significant hazards pertinent to unshielded tunnel boring machines and rodless shaft boring machines for rock, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements; German version EN 815:1996+A2:2008

DIN EN 12321:2009 地下采矿机械.铠装输送机的安全要求规范(含修改件A1:2009),英文版本DIN EN 12321:2009-07

1.1 This European Standard specifies the safety requirements for armoured face conveyors and covers, conveyor drive units, return units, line pans, chain assemblies, devices for tensioning and locking chains. This European Standard does not apply to stage loader ancillaries, armoured face conveyors which form part of mineral bunker systems or operate as spillage conveyors, to haulage systems and guides utilised by extraction machines, to the technical requirements for cable-less remote controls, to compressed air powered machines, or to the interfaces between the elements of the conveyor and other machine installations. Armoured face conveyors are designed for the transport of minerals and rock only. NOTE Armoured face conveyors can be used as a base for guiding the extraction machine and as a link between the face roof support and the extraction machine if required. This European Standard deals with all hazards, hazardous situations and events for the use in mines, when they are used as intended and for the conditions foreseen by the manufacturer. See clause 4 for the hazards dealt with. 1.2 This European Standard does not cover any hazards resulting from the electrical equipment associated with the machine. It does not contain any requirements relating to dust suppression or firedamp hazards. Hazards due to noise are also excluded from this European Standard, but a separate European Standard is in preparation where hazards due to noise will be addressed. It is intended for manufacturers producing and marketing complete machines, and for manufacturers assembling new parts from different origins or assembling new machines even for their own use. These are called "manufacturers" in this European Standard. 1.3 This European Standard applies to armoured face conveyors which are manufactured after the date of issue of this European Standard.

Underground mining machinery - Specification for the safety requirements of armoured face conveyors (includes Amendment A1:2009); English version of DIN EN 12321:2009-07

DIN EN 1889-2:2009 地下采矿机械.移动式机械地下作.安全性.第2部分:轨道机车(含修改件A1:2009),英文版本DIN EN 1889-2:2009-07

This European standard specifies the safety requirements and tests for rail locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives). 1.1 This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, the operation and the maintenance of locomotives when carried out in accordance with the specifications given by the manufacturer or his authorised representative. 1.2 This European standard does not address the special hazards associated with the rack drive of rack and pinion locomotives. 1.3 This European standard does not deal with radiation and vibration. It does not address remote control locomotives or operation in potentially explosive atmospheres. Hazards due to noise are excluded from this standard, but a separate standard is in preparation where hazards due to noise will be addressed. 1.4 This European standard applies to locomotives which are manufactured after the date of issue of this standard.

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives (includes Amendment A1:2009); English version of DIN EN 1889-2:2009-07

MT/T 238.2-2008 悬臂式掘进机.第2部分:型式与参数

本标准规定了悬臂式掘进机（以下简称掘进机）的型式与参数。 本标准适用于含有瓦斯、煤尘或其他爆炸性气体混合物矿井中作业的掘进机；也适合于其他工程使用的同类型掘进机。

Boom-type roadheader.Part 2: Types and parameters

MT/T 238.2-2007 悬臂式掘进机 第2部分：型式与参数

Cantilever TBM Part 2: Types and Parameters

BS EN 15162:2008 天然石头的开采和加工用机械和设备.直锯的安全要求

This standard applies to monoblade or multiblade gang saws, as defined in 3.1, for cutting marble, granite, other types of natural stone, artificial or natural conglomerates and similar materials. This standard does not deal with noise as a significant hazard. This standard deals with all significant hazards, hazardous situations and events relevant to gang saw machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards during transport, commissioning, use and maintenance. This document is not applicable to gang saws which are manufactured before the date of its publication as EN.

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

JB/T 10881-2008 井下现场混装乳化炸药车

本标准规定了井下现场混装乳化炸药车产品的型式与基本参数，技术要求，试验方法，检验规则，标志、包装、运输、贮存等。 本标准适用于井下现场混装乳化炸药车（以下简称井下装药车）。该井下装药车主要用于冶金、建材、有色、化工、水利等无爆炸性气体井下矿山掘进、采矿或工程爆破作业中向炮孔（特别适用于有水炮孔）现场混制装填乳化炸药。

Underground site mixed and charged emulsion explosive trucks

DIN 22261-4:2007 褐煤露天矿挖掘机、推土机和辅助设备.第4部分:提升铰车用机械制动器

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 4: Hoisting winch brakes

DIN 22261-6:2007 褐煤露天矿挖掘机、推土机和辅助设备.第6部分:绳索和绳索端紧固件的检验

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 6: Examination of ropes and rope end fittings

DIN 22261-5:2007 褐煤露天矿挖掘机、推土机和辅助设备.第5部分:回转式制动器和超载保险器

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 5: Slewing brakes and overload protecting devices

MT/T 541.2-2007 悬臂式掘进机 检修规范 第2部分:机械部分

本部分规定了悬臂式掘进机（以下简称掘进机）机械部分检修质量的一般要求，各系统中元部件的检修方法和要求。 本部分适用于悬臂式掘进机机械部分检修质量的评定和控制。

Boom type roadheader overhaul criterion. Part 2: Mechanism part

DIN 22261-2:2006 露天挖掘褐煤矿挖掘机、排土机和辅助设备.第2部分:计算原理

The specifications of this document form the calculation principles for the construction and commissioning of excavators (with the exception of floating excavators), stackers and auxiliary equipment in opencast lignite mines.#,,#

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 2: Calculation principles

MT/T 539-2006 煤矿用电动锚杆钻机

本标准规定了煤矿用电动锚杆钻机（以下简称钻机）的型号与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿用电动锚杆钻机。

Electrical bolting rotary drill in coal mine

MT/T 238.3-2006 悬臂式掘进机.第3部分：通用技术条件

本标准规定了悬臂式掘进机的术语和定义、要求、试验方法、检验规则以及标志、包装、运输及贮存。 本标准适用于还有瓦斯、煤尘或其他爆炸性混合气体中作业的悬臂式掘进机（以下简称掘进机），也适用于其他工程巷道中作业的同类掘进机。

Boom-type roadheader.Part 3:General technical condition