D92 采掘设备 标准查询与下载

NF E56-006:2003 地下采矿机械.铠装面输送机的安全性要求规范

Underground mining machinery - Specification for the safety requirements of armoured face conveyors.

BS EN 12321:2003 地下采矿机械.铠装输送机的安全要求规范

1 This European Standard specifies the safety requirements for armoured face conveyors and covers, conveyor drive units, return units, line pans, chain assemblies, devices for tensioning and locking chains. This European Standard does not apply to stage loader ancillaries, armoured face conveyors which form part of mineral bunker systems or operate as spillage conveyors, to haulage systems and guides utilised by extraction machines, to the technical requirements for cable-less remote controls, to compressed air powered machines, or to the interfaces between the elements of the conveyor and other machine installations. Armoured face conveyors are designed for the transport of minerals and rock only. NOTE Armoured face conveyors can be used as a base for guiding the extraction machine and as a link between the face roof support and the extraction machine if required. This European Standard deals with all hazards, hazardous situations and events for the use in mines, when they are used as intended and for the conditions foreseen by the manufacturer. See clause 4 for the hazards dealt with. 2 This European Standard does not cover any hazards resulting from the electrical equipment associated with the machine. It does not contain any requirements relating to dust suppression or firedamp hazards. Hazards due to noise are also excluded from this European Standard, but a separate European Standard is in preparation where hazards due to noise will be addressed. It is intended for manufacturers producing and marketing complete machines, and for manufacturers assembling new parts from different origins or assembling new machines even for their own use. These are called "manufacturers" in this European Standard. 3 This European Standard applies to armoured face conveyors which are manufactured after the date of issue of this European Standard.

Underground mining machinery - Specification for the safety requirements of armoured face conveyors

KS E ISO 723:2002 凿岩设备.空心六角形钻钢的锻造柄和卡紧套环

이 규격은 ISO 722에 따르는 착암기의 막대형의 중공 육각 드릴에서 단조된 칼라 섕크에

Rock drilling equipment－Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels

BS EN 12111:2002+A1:2009 隧道机械.巷道掘进机,联合采矿机和冲击式挑顶机.安全性要求

1.1 Description of the machine This European Standard specifies all significant hazards, hazardous situations and events relevant to road headers, continuous miners and impact rippers, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This European Standard is applicable to road headers, continuous miners and impact rippers used in tunnelling and underground mining. Certain associated matters are not included in the scope of this standard: ? the supply of electricity up to the machine; ? the provision of a cab or similar accommodation for an operator; ? ancillary tools and equipment used for, at or on the machine; ? equipment for use in potentially explosive atmospheres; ? any method for monitoring gases in the atmosphere of the tunnel or other workplace; ? the method of calculation of the design of any part described or the verification of this; ? loading and transport equipment which is not an integral part of the machine; ? electromagnetic compatibility; ? pressure vessels. NOTE 1 Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. NOTE 2 prEN 1710 “Equipment and components intended for use in potentially explosive atmospheres in mines” is currently under preparation in CEN/TC 305. 1.2 This standard deals with all significant hazards, hazardous situations and events relevant to road headers, continuous miners and impact rippers, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 1.3 This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements

BS EN 12111:2002 隧道掘进机.巷道掘进机、联合采矿机和冲击式挑顶机.安全要求

1.1 Description of the machine This European Standard specifies all significant hazards, hazardous situations and events relevant to road headers, continuous miners and impact rippers, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This European Standard is applicable to road headers, continuous miners and impact rippers used in tunnelling and underground mining. Certain associated matters are not included in the scope of this standard: - the supply of electricity up to the machine; - the provision of a cab or similar accommodation for an operator; - ancillary tools and equipment used for, at or on the machine; - equipment for use in potentially explosive atmospheres; - any method for monitoring gases in the atmosphere of the tunnel or other workplace; - the method of calculation of the design of any part described or the verification of this; - loading and transport equipment which is not an integral part of the machine; - electromagnetic compatibility; - pressure vessels. NOTE 1 Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. NOTE 2 prEN 1710 “Equipment and components intended for use in potentially explosive atmospheres in mines” is currently under preparation in CEN/TC 305. 1.2 This standard deals with all significant hazards, hazardous situations and events relevant to road headers, continuous miners and impact rippers, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 1.3 This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements

JB/T 10344-2002 动力头式钻机

本标准规定了液压动力头式钻机的型式、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 　　本标准适用于液压动力头式钻机。该钻机主要用于钻凿矿山中小孔径和工程大型基础孔，适用于在冲积层和单轴极限抗压强度不大于200MPa的岩石层中钻凿井(孔)径为ф1m～ф4m的铅垂井(孔)和倾角在20度以内的倾斜井(孔)。

Power head drill

MT/T 922-2002 悬臂式掘进机 装载机构通用技术条件

本标准规定了悬臂式掘进机(以下简称掘进机)装载机构的定义、型式和参数、要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于煤矿井下用掘进机的装载机构，也适用于连续采煤机、装煤机的装载机构。

Boom-type roadheader - General technical conditions of loading mechanism

BS EN 62013-1:2002 对甲烷敏感的矿用头灯.通用要求.爆炸风险的推定和检验

Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

MT/T 910-2002 悬臂式掘进机 履带行走机构设计导则

本标准给出了悬臂式掘进机履带行走机构(以下简称履带行走机构)的设计计算指南。 本标准适用于悬臂式掘进机履带行走机构的设计。

Boom-type roadheader-The design guidelines for crawler mechanism

GOST R 51924-2002 勘探钻井用复式岩心管的一般技术规范

Double tube core barrel for exploration drilling. General technical specifications

LD/T 72-2001 TBM隧道掘进机劳动定额标准

TBM Tunnel Boring Machine Labor Quota Standard

MT/T 880-2000 煤矿用侧卸装岩机试验方法

The testing method of side discharge loader in coal mine

BS EN 12348:2000 立式岩心钻机.安全性

Specifies safety requirements for transportable machines on stands for drilling into stone, concrete and similar mineral materials. It does not cover percussive rock drills or hand-held power drills.

Core drilling machines on a stand - Safety

JB/T 10173-2000 现场混装炸药车移动式地面辅助设施

本标准规定了现场混装炸药车移动式地面辅助设施产品的定义，分类，技术要求，试验方法，检验规则，标志、包装、运输和贮存的要求。 本标准适用于现场混装炸药车移动式地面辅助设施。本设施包括生活车、动力车、原料制备车、原料运输车等，该设施适用于现场混装炸药车。

Mobile ground auxiliaries for site mixed and charged explosive truck

MT/T 862-2000 刨煤机用刨刀和刨刀座

本标准规规定了刨煤机用刨刀和刨刀座的产品分类与基本尺寸、技术要求、试验法那个法、检验规则和标志、包装、运输、贮存。 本标准适用于刨煤机用长、短刨刀和刨刀座。对其他结构形式的刨刀，本标准规定了其代号的编制方法，并可参照本标准执行。

Cutter pick and socket for plough

MT/T 833-1999 悬臂式掘进机.履带行走机构.通用技术条件

Boom-type roadheader-general technical condition of crawler mechanism

ISO 10097-2:1999 金刚石绳索取心钻探设备 系列A 第2部分:英制单位

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes of diameter 1,890 in to 3,790 in, yielding cores of diameter 1,063 in to 2,500 in. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).

Wireline diamond core drilling equipment - System A - Part 2: Inch units

ISO 10097-1:1999 金刚石绳索取心钻探设备 系列A 第1部分:米制单位

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes 48 mm to 96 mm in diameter, yielding cores of 27 mm to 63 mm in diameter. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).

Wireline diamond core drilling equipment - System A - Part 1: Metric units

JB/T 2478-1999 装药器

本标准规定了装药器的型式、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于装药器。该产品主要用于地下矿山开采和峒室、隧道等于工程爆破作业中装填炸药，也可用于地面土石方工程。

Explosive loader

JB/T 9024-1999 铲斗装岩机

本标准规定了铲斗装岩机的型式、基本参数、尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于矿用铲斗装岩机。该装岩机主要用于各种地下掘进和回采有用矿物的场所装载矿岩，也可用于地面装载松散物料。

Bucket loader