共找到 420 条与 颜料 相关的标准,共 28 页
本方法是指颜料干粉在一定温度下,经过规定时间后,与原样比较色泽的差导师来评定耐热。以℃表示。
Determination of resistance to heat of dry power of pigments
本方法是指颜料与调墨油经研磨后,取一定体积的色浆,在一定压力和温度下经一定时间,色浆被压成圆形,量其直径。以mm表示。
Determination of mobility of pigments
本方法是指颜料通过一定孔径的筛子后,剩余物质量与试样质量之比,以百分数表示。
Determination of residue on sieve of pigments
Determination of a parameter for the dust formation of pigments and extenders - Part 1: Rotation method
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test; English version of DIN EN 12878:2006-05
1.1 This specification covers the pigments commercially known as raw umber and burnt umber.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
Standard Specification for Raw and Burnt Umber Pigments
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test.
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5 : determination by filter pressure value test.
This part of EN 13900 specifies a method of assessing the degree of dispersion of a colorant in a thermoplastic polymer. The method is suitable for testing colorants in the form of colour concentrates in all polymer used for extrusion and melt-spinning processes. The filter pressure value (FPV) determined according to this method is valid only for the equipment, conditions and test polymer being used. The use of test conditions differing from those specified may give different results.#,,#
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test; German version EN 13900-5:2005
This part of EN 13900 specifies a method of assessing the degree of dispersion of a colorant in a thermoplastic polymer. The method is suitable for testing colorants in the form of colour concentrates in all polymers used for extrusion and melt-spinning processes. The filter pressure value (FPV) determined according to this method is valid only for the equipment, conditions and test polymer being used. The use of test conditions differing from those specified might give different results. The method of preparing the colour concentrate is not specified in this European Standard. The results obtained for individual colorants are therefore comparable only when the same method of preparation for colour concentrates is used. Annex A is normative and gives a model for the breaker plate. Annex B is informative and provides a model test report containing a result of the round-robin-tests carried out in preparing this European Standard.
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination by filter pressure value test
1.1 This specification covers the pigment commercially known as bone black, ivory black, or drop black. The pigment may be purchased in the dry form or as an aqueous dispersion.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
Standard Specification for Bone Black Pigment
1.1 This specification covers synthetic red iron oxide for use in paints and coatings manufactured by any of the following:1.1.1 Calcination of iron salts.1.1.2 Precipitation from iron salts.1.1.3 Calcination of synthetic iron oxide.1.1.4 Product of organic reduction.
Standard Specification for Synthetic Red Iron Oxide Pigment
1.1 This specification covers dry and wet ground naturally occurring iron oxide, dry and wet ground calcined naturally occurring iron oxide, and mixtures of these with synthetic iron oxides. These pigments are suitable for use in paints, coatings, and many other applications.
Standard Specification for Natural Red and Brown Iron Oxide Pigments
1.1 This specification covers synthetic red iron oxide for use in paints and coatings manufactured by any of the following: 1.1.1 Calcination of iron salts. 1.1.2 Precipitation from iron salts. 1.1.3 Calcination of synthetic iron oxide. 1.1.4 Product of organic reduction.
Standard Specification for Synthetic Red Iron Oxide Pigment
1.1 This specification covers dry and wet ground naturally occurring iron oxide, dry and wet ground calcined naturally occurring iron oxide, and mixtures of these with synthetic iron oxides. These pigments are suitable for use in paints, coatings, and many other applications.
Standard Specification for Natural Red and Brown Iron Oxide Pigments
1.1 This specification covers ferrous earthy pigment included under the general term "ochre." The pigment may be purchased in the dry form.
Standard Specification for Ochre Pigment
本标准规定了云母珠光颜料的产品分类、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于以云母为基材,在其表面包覆二氧化钛、氧化铁等金属氧化物而成的珠光颜料。该产品主要适用于涂料、油墨、塑料、皮革、化妆晶等行业。
Mica-based pear lescent pigments
This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials in plasticized polyvinyl chloride (plasticized PVC) materials, together with the composition of these basic mixtures.#,,#
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures; German version EN 14469-1:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens; German version EN 14469-2:2004
This Part of EN 14469 specifies a procedure for determining the bleeding of colouring materials in plasticized polyvinyl chloride (PVC-P).
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials; German version EN 14469-4:2004
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号