H41 生铁 标准查询与下载

NF A32-301*NF EN 13835:2012 铸造.奥氏体铸铁

Founding - Austenitic cast irons.

NF A32-201:2012 铸造.球墨铸铁

Founding - Spheroidal graphite cast irons.

DIN EN 16124:2012 铸造.高温低合金铁素体球墨铸铁.德文版本 EN 16124-2011

Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications; German version EN 16124:2011

BS EN 1563:2011 铸造.球墨铸铁

Founding. Spheroidal graphite cast irons

DIN EN 1564:2012 铸造.奥铁体球墨铸铁.德文版 EN 1564-2011

Founding - Ausferritic spheroidal graphite cast irons; German version EN 1564:2011

DIN EN 1561:2012 铸造.灰口铸铁.德文版 EN 1561-2011

Founding - Grey cast irons; German version EN 1561:2011

YB/T 5296-2011 炼钢用生铁

本标准规定了炼钢用生铁技术要求、试验方法、检验规则和质量证明书。 本标准适用于炼钢用生铁。

Pig iron for steelmaking

BS EN 1564:2011 铸造.奥铁体球墨铸铁

Founding. Ausferritic spheroidal graphite cast irons

BS EN 1561:2011 铸造.灰口铸铁

Founding. Grey cast irons

SN/T 2953-2011 生铁中硅、锰、磷、铬的测定 电感耦合等离子体原子发射光谱法

本标准规定了电感耦合等离子体原子发射光谱法测定生铁中硅、锰、磷、铬元素的方法。 本标准适用于生铁中硅、锰、磷、铬含量的测定，各元素测定范围见表1. 表1 各元素测定范围（略）

Determination of silicon, manganese, phosphorus and chromium in pig iron by inductively coupled plasma atomic emission spectrometry

ISO/TR 10809-2:2011 铸铁.第2部分:焊接

IMPORTANT — The electronic file of this document contains colours which are considered to be useful for the correct understanding of the document. Users should therefore consider printing this document using a colour printer. The purpose of this part of ISO/TR 10809 is to assist the design engineer to understand and to acquire knowledge of how the family of cast iron materials can be welded and to utilize this technology to its full advantage in selecting the most appropriate technique for a particular cast iron. Because the application of welding technology and the metallurgical implications of welding are not scientific disciplines normally taught to engineering students, such users often have limited knowledge of the fundamentals underpinning welding technology for cast irons. This part of ISO/TR 10809 explains what can be achieved, what cannot be achieved and why. It is not designed to be a textbook of welding technology. It helps users to select the most appropriate welding process and conditions for a specific application. This part of ISO/TR 10809 covers production (including finishing and joint welding) and repair welding.

Cast irons - Part 2: Welding

KS D 4302-2011 球墨铸铁

이 표준은 구상(球狀) 흑연 주철품(이하 주철품이라 한다.)에 대하여 규정한다.

Spheroidal graphite iron castings

ISO/TR 945-2:2011 铸铁的微观结构.第2部分:图像分析的石墨分类

This part of ISO 945 deals with the two-dimensional characterisation of graphite form and size in cast irons. A standard method for determining graphite form by image analysis had not been developed at the time of this report, but several methods are in use in the industry. The purpose of this part of ISO 945 is to give an illustration of what is possible and to suggest ways in which the technique might develop in the future. This part of ISO 945 does not apply to the graphite distribution of grey (lamellar graphite) cast iron as defined in ISO 945-1. This part of ISO 945 describes procedures used to carry out image analysis of graphite form and size and provides a method of comparison to the results obtained using visual analysis techniques. It does not specify any particular mathematical description of the graphite forms but provides a means for comparison. NOTE A mathematical description of graphite form is given in ISO 16112. Other mathematical descriptions of graphite forms and information on technical research are given in the Bibliography.

Microstructure of cast irons. Part 2: Graphite classification by image analysis

ASTM A842-11a 高密度石墨铸铁的标准规格

1.1 This specification covers castings made of compacted graphite iron, which is described as cast iron with the graphite in compacted (vermiform) shapes and essentially free of flake graphite in the bulk of the casting. 1.2 No precise quantitative relationship can be stated between the properties of iron in the various locations of the same casting and those of a test bar cast from the same iron (see Appendix X1). 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1 Exception8212;The inch-pound units in Figs. 1-3 and 5 are standard. SI units are added for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Compacted Graphite Iron Castings

ASTM A842-11 高密度石墨铸铁的标准规格

1.1 This specification covers castings made of compacted graphite iron, which is described as cast iron with the graphite in compacted (vermiform) shapes and essentially free of flake graphite. 1.2 No precise quantitative relationship can be stated between the properties of iron in the various locations of the same casting and those of a test bar cast from the same iron (see Appendix X1). 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1 Exception8212;The inch-pound units in Figs. 1-3 and 5 are standard. SI units are added for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Compacted Graphite Iron Castings

DB41/T 667-2010 郏县铸铁锅

Jiaxian cast iron pot

SN/T 0508-2010 进出口生铁检验规程

本标准规定了进出口生铁的取样、制样、检验及结果判定。 本标准适用于进出口生铁的检验。

Rules for the inspection of import and export pig iron

KS D 4317-2010 球墨铸铁管和管件的环氧树脂粉内面涂层

이 표준은 덕타일 주철관(이하 관이라 한다.)의 내면에 형성한 에폭시 수지 분체 도장(이하

Epoxy-powder coating for interior of ductile cast iron pipes and fittings

KS D 4311-2010 球墨铸铁管

이 표준은 지중(땅속) 또는 지상에 배관하여 압력 또는 무압력 상태에서 물의 수송 등에 사

Ductile iron pipes

NF A32-062:2010 抗腐蚀钢铸件

Corrosion resistant steel castings.