J01 技术管理 标准查询与下载
共找到 264 条与 技术管理 相关的标准，共 18 页
General technical requirements for steam condensate recovery equipment
- ICS
- 01.110
- CCS
- J01
- 发布
- 2021-11-09
- 实施
- 2022-01-09
Energy saving management specification for electric heating die forging production process
- ICS
- 25.010
- CCS
- J01
- 发布
- 2021-04-01
- 实施
- 2021-06-01
This document specifies requirements for the preparation, revision and presentation of digital product definition data, hereafter referred to as data sets, complementing existing standards. It supports two methods of application: 3D model-only and 3D model with 2D drawing in digital format. The structure of this document presents requirements common to both methods followed by clauses providing for any essential, differing requirements for each method. Additionally, its use in conjunction with computeraided design (CAD) systems can assist in the progression towards improved modelling and annotation practices for CAD and engineering disciplines, as well as serving as a guideline for CAx software developers. The actual definitions for the interpretation, in particular the ISO TPD and ISO GPS rules, are taken from the original definition standards, e.g. ISO 129-1 and ISO 1101. When the term model is used in this document it applies to both design models and annotated models.
Technical product documentation - Digital product definition data practices
- ICS
- 01.110
- CCS
- J01
- 发布
- 2021-04-00
- 实施
Information traceability requirements for the production process of die forgings
- ICS
- 35.240.50
- CCS
- J01
- 发布
- 2020-09-22
- 实施
- 2020-11-22
Technical specification for on-line monitoring of energy efficiency of gas-fired industrial boilers
- ICS
- 27.060
- CCS
- J01
- 发布
- 2019-02-28
- 实施
- 2019-06-01
Smart Grid Energy Storage System Performance Test Technical Specification Part 2 Wind Power Output Smooth Application
- ICS
- 27.020.01
- CCS
- J01
- 发布
- 2019-02-28
- 实施
- 2019-06-01
Smart Grid Energy Storage System Performance Test Technical Specification Part 1 Peak Shaving and Valley Filling Application
- ICS
- 27.020.01
- CCS
- J01
- 发布
- 2019-02-28
- 实施
- 2019-06-01
Smart grid energy storage system performance test technical specification part 3 frequency regulation application
- ICS
- 27.020.01
- CCS
- J01
- 发布
- 2019-02-28
- 实施
- 2019-06-01
This standard describes tool assemblies which are usually deployed in the tool magazine of a machine tool.
Tabular layouts of properties - Part 180: Tool assemblies
- ICS
- 21.020;25.060.01
- CCS
- J01
- 发布
- 2017-11-01
- 实施
Digital technical product documentation (DTPD) -- Part 4: Indication of annotation for 3D annotated model -- Dimensions and dimensional tolerances
- ICS
- 01.110
- CCS
- J01
- 发布
- 2017-08-21
- 实施
Digital technical product documentation (DTPD) -- Part 3: Presentation of design model for 3D annotated model
- ICS
- 01.110
- CCS
- J01
- 发布
- 2017-08-21
- 实施
Standardized product ontology register and transfer by spreadsheets -- Part 1: Logical structure for data parcels
- ICS
- 01.040.01;01.110
- CCS
- J01
- 发布
- 2017-03-21
- 实施
General principles on reliability for mechanical products
- ICS
- 21.020
- CCS
- J01
- 发布
- 2017-01-20
- 实施
This Technical Specification provides guidelines for the identification of measurands to characterize nano-objects, and their agglomerates and aggregates and to assess specific properties relevant to the performance of materials that contain them. It provides guidance for relevant and reliable measurement.
Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them
- ICS
- 07.120
- CCS
- J01
- 发布
- 2016-12
- 实施
This Technical Specification provides a guidance for the responsible development of nanotechnologies taking into account:- Board Accountability; - Stakeholder Involvement; - Worker Health and Safety; - Benefits to and Risks for Public Health, Safety and the Environment; - Wider Social and Ethical Implications and Impacts; - Engagement with Business Partners; - Transparency and Disclosure. NOTE 1 This Technical Specification contributes to social responsibility as defined in ISO 26000:2010. NOTE 2 Nanotechnology activities include industrial production, R&D, services, and marketing of products. This Technical Specification neither covers labelling and advertising aspects nor is it intended for certification purposes, nor does it imply any legally binding agreements. This Technical Specification intends to cover nanotechnology activities involving manufactured nanomaterials, and where relevant incidental nanomaterials.
Nanotechnologies - Guidance for the responsible development of nanotechnologies
- ICS
- 03.100.02;07.120
- CCS
- J01
- 发布
- 2016-05
- 实施
Technical product documentation - Protection notices for restricting the use of documents and products
- ICS
- 01.110
- CCS
- J01
- 发布
- 2016-04
- 实施
This European Standard describes a procedure for analysing human activity in relation to specifying and refining the human component in the design or redesign of machinery and work systems. NOTE 1 The ergonomics methodology described in this European Standard could also be applied to the design or redesign of products and non-work systems. This European Standard is intended to assist project leaders in implementing human and physical resources, methods and schedules as well as in preparing the documents necessary to meeting related requirements. The ergonomics methodology described can be applied to all different stages in design projects from the earliest concept to the final "prototype" or "mock-up", whatever the industrial field or sector. The objective of this European Standard is to achieve a solution that takes into account as many situations as possible which all users - including operators, maintenance staff and installers, may encounter. This will ultimately allow improved usability of the machinery and more robust technical solutions, combined with significantly greater system resilience, user autonomy and accessibility. NOTE 2 Examples of the application of the methodology described in this European Standard are provided in Annex A.
Ergonomics methods - Part 2: A methodology for work analysis to support design
- ICS
- 13.110;13.180
- CCS
- J01
- 发布
- 2016-03
- 实施
Measurement and verification of energy efficiency. Determination of energy savings in the operation of certain types of equipment (method of retrofit isolation)
- ICS
- 01.110
- CCS
- J01
- 发布
- 2016
- 实施
- 2017-07-01
本标准规定了机力通风湿式冷却塔循环水系统用水效率评定和测试方法。 本标准适用于循环冷却水系统中以空气作为冷源的机力通风湿式冷却塔，不包括水处理系统用水量。
The water utilization efficiency limit and grade of cooling tower
- ICS
- 27.200
- CCS
- J01
- 发布
- 2015-12-29
- 实施
- 2016-04-01
Technical product documentation - Digital product definition data practices
- ICS
- 01.110;35.240.10
- CCS
- J01
- 发布
- 2015-12
- 实施
