J57 插、拉、刨、锯床 标准查询与下载

DIN EN 13898:2009 机床.安全性.冷金属锯床(包括修改件A1-2009).英文版本DIN EN 13898-2009-09

1.1 This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade. 1.2 This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting. 1.3 This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine. 1.4 This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.

Machine tools - Safety - Sawing machines for cold metal (includes Amendment A1:2009); English version of DIN EN 13898:2009-09

EN 13862:2001+A1:2009 楼板切割机床.安全性

This European Standard applies to pedestrian controlled floor sawing machines having power feed, manual feed or hand feed (see 3.2) for sawing, grooving and milling floor surfaces made of concrete, asphalt and similar mineral building materials where the main power is supplied by electric or internal combustion prime engine. The power transmission of floor sawing machines is mechanical or hydraulic. This European Standard deals with all significant hazards pertinent to floor sawing machines, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. These machines are designed for use with rotating cutting-off wheels for wet and dry cutting. These cutting-off wheels can be either a diamond cutting-off wheel or a boron nitride cutting-off wheel. NOTE Other types of cutting tools may also be used provided that they fall within the design and usage parameters of the machine. This standard does not cover this. This European Standard does not apply to: self-propelled ride-on floor sawing machines; machines moving along a rail; hand-held portable cutting off machines for construction materials mounted on a mobile support, to be used as floor saws; remote controlled machines. This European Standard covers electrical hazards by making reference to relevant European Standards (see 5.2). Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment or machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards is made where such standards are applicable and so far necessary. In this European Standard, floor sawing machines are called "machines", and cutting-off wheels are called "tools". This European Standard applies primarily to machines which are manufactured after the date of approval of the standard by CEN.

Floor cutting-off machines - Safety

JIS B 4115 AMD 1:2009 硬金属切割锯(修改件1)

Hardmetal slitting saws (Amendment 1)

JB/T 5758.1-2008 水平移动牛头刨床.第1部分:精度检验

JB/T 5758的本部分规定了水平移动牛头刨床的预调、几何精度和工作精度检验的要求及检验方法。 本部分适用于最大刨削长度800mm～1250mm，最大刨削宽度1600mm～3200mm的水平移动牛头刨床。

Traverse head shaping machines.Part1:Testing of the accuracy

JB/T 8333.2-2008 轻便悬臂刨床、龙门刨床.第2部分:技术条件

JB/T 8333的本部分规定了轻便悬臂刨床、龙门刨床的制造与验收的要求。 本部分适用于最大刨削宽度为800mm～1250mm一般用途的轻便悬臂刨床、龙门刨床。

Portable cantilever and portal-type planers.Part 2: Specifications

JB/T 5758.2-2008 水平移动牛头刨床.第2部分:技术条件

JB/T 5758的本部分规定了水平移动牛头刨床的技术条件。 本部分适用于最大刨削长度800mm～1250mm，最大刨削宽度1600mm～3200mm的水平移动扭头刨床。

Traverse head shaping machines.Part2:Specifications

JB/T 2732.2-2008 悬臂刨床龙门刨床.第2部分:精度检验

JB/T 2732的本部分规定了悬臂刨床、龙门刨床的预调检验、几何精度和工作精度的检验及相应的公差。 本部分适用于最大刨削宽度1000mm～3150mm一般用途的悬臂刨床、龙门刨床。

Cantilever and portal-type planers.Part 2: Testing of the accurary

NF E65-406:2008 施工现场用便携式平锯和线状锯设备.安全

Transportable wall saw and wire equipment for job site - Safety.

BS EN 15027:2007+A1:2009 工作现场可移动墙锯和线锯设备.安全性

The global description “wall saw and wire saw equipment” contains two differing types of machines for use in the construction industry, and both used to make cuts on walls, ceilings and floors composed of mineral construction materials and/or composite materials. The many different cutting tasks and choice of operating method determine the type of machine to be used for each application. The machines may therefore be split into the following two principal classifications:  Wall saws – exclusively rail guided – transportable.  Wire saws – transportable. The machines are intended for the use of diamond tools. The types of cutting tools used in conjunction with the machines as described above fall within the design and use parameters supplied by the manufacturer. Cutting debris generated by the cutting action is removed from the cutting joint by a medium such as water directed to the cutting tool. Machines covered by this standard may be powered by: electric motor, IC engine, electro-hydraulic drive and IC engine-hydraulic drive. This European Standard deals with all significant hazards, hazardous situations and events relevant to wall saws and wire saws machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards generated by the cutting process work cycle. For special applications, for example, when working in potentially explosive atmospheres, additional safety requirements is necessary which are not covered by this standard. This European Standard does not apply for wire saws intended for quarrying and stationary machining of natural stone as covered by !EN 15163". This European Standard applies primarily to machines which are manufactured after the date of approval by CEN of this standard.

Transportable wall saw and wire saw equipment for job site - Safety

BS EN 15027:2007 施工现场用便携式平锯和线状锯设备.安全性

The global description “wall saw and wire saw equipment” contains two differing types of machines for use in the construction industry, and both used to make cuts on walls, ceilings and floors composed of mineral construction materials and/or composite materials. The many different cutting tasks and choice of operating method determine the type of machine to be used for each application. The machines may therefore be split into the following two principal classifications: ? Wall saws – exclusively rail guided – transportable. ? Wire saws – transportable. The machines are intended for the use of diamond tools. The types of cutting tools used in conjunction with the machines as described above fall within the design and use parameters supplied by the manufacturer. Cutting debry generated by the cutting action is removed from the cutting joint by a medium such as water directed to the cutting tool. Machines covered by this standard may be powered by: electric motor, IC engine, electro-hydraulic drive and IC engine-hydraulic drive. This European Standard deals with all significant hazards, hazardous situations and events relevant to wall saws and wire saws machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards generated by the cutting process work cycle. For special applications, for example, when working in potentially explosive atmospheres, additional safety requirements is necessary which are not covered by this standard. This European Standard does not apply for wire saws intended for quarrying and stationary machining of natural stone as covered by prEN 15163. This European Standard applies primarily to machines which are manufactured after the date of approval by CEN of this standard.

Transportable wall saw and wire saw equipment for job site - Safety

KS C IEC 61939:2007 锯床用锯台.最大锯盘直径为315mm的手持式圆锯用锯台.安全要求

이 규격은 둥근톱 탁상으로 사용하기 위한 톱날 최대지름 315 mm의 수지형 둥근톱용 테이

Saw tables for use as saw benches-Tables for hand-held circular saws with a maximum saw-blade diameter of 315 mm-Safety requirements

ANSI/WMMA O1.1-1-2007 固定角度跳锯用安全要求

This standard covers the safety requirements for the design, installation, care and use of single blade, nonadjustable cut angle jump saws and certain related accessory equipment, used in industrial and commercial applications, having a total connected power of 5 hp (3.7 KW) or greater, or having 3-phase wiring.

Safety Requirements for Fixed Angle Jump Saws

NF E60-141:2006 卧式内拉床的验收条件和专用术语.精确度检测

Conditions of acceptance for horizontal internal broaching machines - Testing of the accuracy.

JB/T 3362.1-2006 牛头刨床 第1部分:参数

JB/T 3362的本部分规定了牛头刨床的基本参数。 本部分适用于最大刨削长度200mm～1250mm的牛头刨床。

Shaping machines Part 1: Parameters

JB/T 3362.3-2006 牛头刨床 第3部分:技术条件

JB/T 3362的本部分规定了牛头刨床制造和验收的技术要求。 本部分适用于最大刨削长度100mm～1250mm的牛头刨床。

Shaping machines Part 3: Specifications

JB/T 10644-2006 卧式侧拉床 精度检验

本标准规定了普通精度级的卧式侧拉床的预调检验和几何精度检验方法。

Horizontal surface broaching machines Testing of the accuracy

JB/T 2732.3-2006 悬臂刨床龙门刨床 第3部分:技术条件

JB/T 2732的本部分规定了悬臂刨床龙门刨床制造和验收要求。 本部分适用于最大刨削宽度为1000mm～3150mm一般用途的悬臂刨床龙门刨床。

Cantilever and portal-type planers Part 3: Specifications

JB/T 2825.4-2006 插床 第4部分:技术条件

JB/T 2825的本部分规定了插床制造和验收的技术要求。 本部分适用于最大插削长度200mm～160Omm的普通插床的制造和验收。

Slotting machines Part 4: Specifications

JB/T 4182.3-2006 立式内拉床.第3部分：技术条件

JB/T 4182的本部分规定了立式内拉床设计、制造检验与验收的技术要求。 本部分适用于额定拉力25kN～1000kN的立式内拉床。

Vertical Internal broaching machines.Part 3:Specifications

JB/T 2825.3-2006 插床 第3部分:精度检验

JB/T 2825的本部分规定了插床的几何精度和工作精度检验的要求及检验方法。 本部分适用于最大插削长度200mm～1600mm的普通插床。

Slotting machines Part 3: Testing of the accuracy