K43 高压开关设备 标准查询与下载



共找到 829 条与 高压开关设备 相关的标准,共 56

High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines (IEC 62271-112:2013); German version EN 62271-112:2013

ICS
29.130.10
CCS
K43
发布
2014-06
实施

High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches; Corrigendum 4

ICS
29.130.10
CCS
K43
发布
2014-06
实施

High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures (IEC 62271-4:2013); German version EN 62271-4:2013

ICS
29.130.10
CCS
K43
发布
2014-06
实施

本标准规定了额定电压为交流40.5 kV户内交流金属封闭高压开关设备的最小安全距离。 本标准适用于海拔1 000 m以上至3 000 m地区交流40.5 kV户内交流金属封闭高压开关设备的设计、安装使用中最小安全距离的选用。

The minimum safe distance of AC 40.5 kV metal-enclosed high-voltage switchgear for plateau use

ICS
29.130.20
CCS
K43
发布
2014-04-30
实施
2014-07-01

"This part of IEC 62271 is applicable to single and three phase direct connections between gas-insulated metal-enclosed switchgear (GIS) for rated voltages above 52 kV and transformer arrangements to establish electrical and mechanical interchange ability and to determine the limits of supply of for the transformer connection. Direct connections are immersed on one end in the transformer oil or insulating gas and on the other end in the insulating gas of the switchgear. Transformer arrangements are single-phase transformers with single-phase enclosed arrangement@ three-phase transformers with three single-phase enclosed arrangements or three-phase transformers with a three-phase enclosed arrangement with three transformer bushings. The connection satisfies the requirements of IEC 62271-203 for gas-insulated metal-enclosed switchgear@ IEC 60076 for power transformer and IEC 60137 for completely immersed bushings. For the purpose of this international standard the term ""switchgear"" is used for ""gas-insulated metal-enclosed switchgear""."

High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV

ICS
29.020
CCS
K43
发布
2014-04-01
实施
2014-04-01

High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

ICS
29.130.10
CCS
K43
发布
2014-03
实施

This part of IEC 62271 specifies the service conditions@ rated characteristics@ general structural requirements and test methods of high voltage/low voltage or low voltage/high voltage prefabricated substations@ which are cable-connected@ to be operated from inside (walk-in type) or outside (non-walk-in type) for alternating current of rated voltages above 1 kV and up to and including 52 kV on the high voltage side@ and for one or more transformers for service frequencies up to and including 60 Hz for outdoor installation at locations with public accessibility and where protection of personnel is provided. Prefabricated substations can be situated at ground level or partially or completely below ground level. In general a prefabricated substation comprises an enclosure containing the following electrical components: - power transformers; - high voltage and low voltage switchgear and controlgear; - high voltage and low voltage interconnections; - auxiliary equipment and circuits. However@ relevant provisions of this standard are applicable to designs where not all these electrical components exist (for example@ an installation consisting of power transformer and low voltage switchgear). Non-prefabricated substations should comply with the applicable requirements of IEC 61936- 1:2010.

High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation

ICS
29.130.10
CCS
K43
发布
2014-03
实施
2014-04-04

High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters; Corrigendum 1

ICS
29.130.10
CCS
K43
发布
2014-02
实施

High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches (IEC 62271-109:2008 + A1:2013); German version EN 62271-109:2009 + A1:2013

ICS
29.130.10
CCS
K43
发布
2014-02
实施
2014-02-01

La présente partie de la CEI 62271 s'applique aux procédures de manipulation du SF6 lors de l'installation, de la mise en service, du fonctionnement normal ou anormal, et de l'élimination en fin de vie de l'appareillage à haute tension.Ces procédures sont considérées comme des exigences minimales pour garantir la sécurité du personnel travaillant avec du SF6 (voir Annexe B) et pour minimiser l'émission de SF6 vers l'environnement.Cette norme s'applique également de façon générale aux mélanges de gaz contenant du SF6.Les particularités de leur manipulation sont traitées en Annexe J.

High-voltage switchgear and controlgear - Part 4 : handling procedures for sulphur hexafluoride (SF6) and its mixtures

ICS
29.130.10
CCS
K43
发布
2014-01-18
实施
2014-01-18

Cette partie de la CEI 62271 s'applique aux sectionneurs de terre rapides à courant alternatif conçus pour les installations intérieures et extérieures et pour fonctionner à des fréquences utiles de 50 Hz et 60 Hz sur des réseaux de tensions supérieures ou égales à 550 kV.Les sectionneurs de terre rapides décrits dans la présente norme sont destinés à supprimer l'arc secondaire demeurant après l'élimination des défauts sur les lignes de transport par les disjoncteurs.

High-voltage switchgear and controlgear - Part 112 : alternating current high-speed earthing switches for secondary arc extinction on transmission lines

ICS
29.130.10
CCS
K43
发布
2014-01-18
实施
2014-01-18

High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches (IEC 62271-102:2001/A2:2013); German version EN 62271-102:2002/A2:2013

ICS
29.130.10
CCS
K43
发布
2013-12
实施
2013-12-01

High-voltage switchgear and controlgear. Handling procedures for sulphur hexafluoride (SF6) and its mixtures

ICS
29.130.10
CCS
K43
发布
2013-11-30
实施
2013-11-30

Power transformers. Liquid-immersed power transformers using high-temperature insulation materials

ICS
29.180
CCS
K43
发布
2013-11-30
实施
2013-11-30

本标准适用于DL/T 402-2007范围内的高压交流断路器。在DL/T 402-2007的6.102-6.111规定的试验方式范围内,本标准给出了用合成方法试验高压交流断路器关合和开断能力的一般规则。本标准中描述的方法和技术是通用的。本标准的目的是确定合成试验的判据,以及对试验结果作出适当的评估。该判据将确定试验方法的有效性不会因试验回路的变更而改变。

Synthetic testing of high-voltage alternating current circuit-breakers

ICS
29.130.10
CCS
K43
发布
2013-11-28
实施
2014-04-01

本标准规定了额定电压72.5kV及以上智能气体绝缘金属封闭开关设备(以下简称智能GIS)的相关术语,明确了智能GIS的技术原则、使用条件、设计与结构以及试验等方面的要求。本标准适用于额定电压72.5kV及以上气体绝缘金属封闭智能开关设备,智能GIS除满足GB 7674-2008外,还应满足本标准要求。其他相关开关设备,如紧凑型成套开关设备(HGIS)、SF断路器可参照本标准。

Intelligent gas-insulated metal-enclosed switchgear for rated voltages of 72.5kV and above

ICS
29.130.10
CCS
K43
发布
2013-11-28
实施
2014-04-01

High-voltage switchgear and controlgear. Alternating current high-speed earthing switches for secondary arc extinction on transmission lines

ICS
29.130.10
CCS
K43
发布
2013-10-31
实施
2013-10-31

High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV; Corrigendum 1

ICS
29.130.10
CCS
K43
发布
2013-10
实施

This British Standard gives recommendations and guidance for the maintenance of electrical switchgear and controlgear having a rated a.c. or d.c. voltage above 36 kV. NOTE This standard is not applicable to explosion protected switchgear and controlgear. Inspection and maintenance of electrical apparatus in explosive gas atmospheres is covered in BS EN 60079-17.

Maintenance of electrical switchgear and controlgear for voltages above 36 kV. Code of practice

ICS
29.130.10
CCS
K43
发布
2013-09-30
实施
2013-09-30

本标准适用于矿山在用高压开关设备电气定期检验、新安装投运前及交接验收检验。本标准不适用于产品出厂检验、大修后检验。

Specifications for electrical safety testing and inspection of high-voltage switchgear in use in mines

ICS
29.240.30
CCS
K43
发布
2013-09-22
实施
2013-10-30



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号