K48 绝缘子 标准查询与下载

ANSI C29.11-2012 架空输电线用合成悬挂绝缘子.检测

Comprises a manual of test methods to be followed in making tests to determine the characteristics of composite electrical power insulators.

Composite Suspension Insulators for Overhead Transmission Lines - Test

GJB 3522A-2011 氧化铍陶瓷规范

本规范规定了微电子器件、光电器件、电真空器件、电阻基体等用氧化铍陶瓷的要求、质量保证规定、交货准备等。 其他电子和电气元件用氧化铍陶瓷可参照使用。

Specification for beryllia ceramics

JB/T 11219.1-2011 高压架空线路复合绝缘子用端部装配件.第1部分：绝缘子串元件用端部装配件

JB/T 11219的本部分规定了高压架空线路复合绝缘子串元件用端部装配件的型号、尺寸、技术要求、试验方法及包装和标识等内容。 本部分适用于交、直流高压架空线路复合绝缘子串元件使用压接工艺的端部装配件。

End fitting for composite insulator with a high voltage overhead line.Part 1:End fitting for string insulator units

IEC 62621:2011 轨道交通.固定设备.电力牵引.用于架空接触线系统的复合绝缘子特定要求

This International Standard specifies characteristics for composite insulators of electric traction overhead contact line systems for railways@ as defined in IEC 60913. Insulators specified in this standard are applied for electric traction supply voltages with a nominal voltage greater than 1 000 V for a.c. or a nominal voltage greater than 1 500 V for d.c.. Specific applications where high torsional loads can occur are outside the scope of this standard and particular tests are agreed between the supplier and customer to represent the critical loading arrangements. This International Standard applies to composite insulators as defined in 3.1 below and not to other polymeric insulators. The provisions contained in this standard are intended for the design and construction of new electric traction overhead contact line systems using insulators@ or when complete refurbishment of existing overhead contact line systems takes place. This standard provides the purchaser and manufacturer with a range of tests which are used to evaluate the suitability of an insulator product for a given railway environment. Additional tests may be specified by the client to measure the compliance of the insulator under particular operating conditions. The standard establishes the product characteristics@ the test methods and acceptance criteria. The object of this standard is to stipulate the provisions for the design and provision of the service indicated by the manufacturer to the customer or informed buyer for application on the railway infrastructure.

Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems

DL/T 383-2010 污秽条件高压瓷套管的人工淋雨试验方法

本标准规定了交流系统用高压瓷套管在污秽条件下的人工淋雨试验方法中的一般规定、污秽物质、试品准备、污秽度的选择和测定、试品安装、试验程序等内容。 本标准适用于户外污秽环境条件下的额定电压为110kV-500kV瓷套管（含空心瓷绝缘子）的性能试验。 本标准对有机复合套管（含空心复合绝缘子）除增补了一些特殊规定（见附录A）外，其他均可参照本标准进行试验。 本标准对直流套管除试验电源的特殊要求外，其他也可参照本标准进行试验。 本标准不适用于水平安装的穿墙套管。

Artificial heavy rain test method for high voltage bushing under pollution condition

DIN EN 50151 Berichtigung 1:2010 轨道交通.电力牵引.复合材料绝缘子特殊要求.德文版本EN 50151-2003,DIN EN 50151(VDE 0115-603)-2004-10的勘误表.德文版本EN 50151-2003的勘误表CENELEC-Cor.-2010

Railway applications - Fixed installations - Electric traction - Special requirements for composite insulators; German version EN 50151:2003, Corrigendum to DIN EN 50151 (VDE 0115-603):2004-10; German version CENELEC-Cor.:2010 to EN 50151:2003

DIN EN 62223:2010 绝缘子.绝缘子术语表和定义(IEC 62223-2009).德文版本EN 62223-2009

Insulators - Insulators Glossary of terms and definitions (IEC 62223:2009); German version EN 62223:2009

DL/T 376-2010 复合绝缘子用硅橡胶绝缘材料通用技术条件

本标准规定了标称电压高于1000V的户外交、直流复合绝缘子用硅橡胶绝缘材料的技术要求、试验方法。 本标准适用于复合绝缘子用硅橡胶绝缘材料，不适用于硅油、硅脂、RTV涂料、环氧树脂、乙丙橡胶等绝缘材料。

General technical tequirements of silicone rubber insulation materials for composite insulators

DL/T 368-2010 输电线路用绝缘子污秽外绝缘的高海拔修正

本标准规定了标称电压高于1000V交、直流输电线路用盘形悬式绝缘子在高海拔地区污秽条件下绝缘子污耐受电压和统一爬电比距的修正方法。 本标准适用于海拔高度1000m-5500m地区的盘形悬式绝缘子。支柱绝缘子和套管的污耐受电压和统一爬电比距的修正方法可参考本标准。

The correction of high altitude on pollution external insulation for insulators used in transmission line

DIN EN 61466-1 Berichtigung 1:2010 额定电压超过1KV的架空线用复合绝缘子串元件.第1部分:标准强度等级和终端配件(IEC 61466-1:1997).德文版本EN 61466-1-1997.标准DIN EN 61466-1 (VDE 0441-4)-1997的勘误表.(IEC-Cor. 1-2007 to IEC 61466-1-1997)

Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 1: Standard strength classes and end fittings (IEC 61466-1:1997); German version EN 61466-1:1997, Corrigendum to DIN EN 61466-1 (VDE 0441-4):1997-10; (IEC-

BS EN 62223:2009 绝缘子.术语表和定义

This International Standard specifies terms defined in standards that fall under the scope of technical committee TC 36: Insulators. It covers terms that can be found in IEC 60050-471 as well as terms not appropriate for inclusion in IEC 60050-471 but used widely in the standards of IEC TC 36. IEC 60050-471 is not intended to cover all the terms used in the various IEC standards but provides rather a general purpose vocabulary giving the basic terms and reference terms to be used by all technical committees. This glossary is intended to harmonize terms not listed in IEC 60050-471 but used in the publications of committee TC 36.

Insulators - Glossary of terms and definitions

SANS 62223:2010 绝缘体．术语和定义词汇表

Specifies terms defined in standards that fall under the scope of technical committee TC 36: Insulators. Covers terms that can be found in IEC 60050-471 as well as terms not appropriate for inclusion in IEC 60050-471 but used widely in the standards of I

Insulators - Glossary of terms and definitions

DIN EN 61467:2009 架空线路用绝缘子.标称电压1000V以上线路用绝缘子串和绝缘子组.交流电弧试验(IEC 61467:2008),德文版本EN 61467:2008

Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1000 V - AC power arc tests (IEC 61467:2008); German version EN 61467:2008

BS DD IEC/TS 60815-2:2008 污染条件下用高压绝缘子的选择和尺寸确定.交流系统用陶瓷和玻璃绝缘子

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Ceramic and glass insulators for a. c. systems

BS DD IEC/TS 60815-3:2008 污染条件下高压绝缘子使用的选择和尺寸确定.交流系统用聚合物绝缘子

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Polymer insulators for a.c. systems

BS DD IEC/TS 60815-1:2008 污染条件下用高压绝缘子的选择和尺寸确定.定义,信息和一般原则

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Definitions, information and general principles

IEC 62223:2009 绝缘子.术语表

Insulators - Glossary of terms

DIN EN 61109:2009 架空线路用绝缘子.标称电压大于1000V的交流设备用复合绝缘子和耐张绝缘子.定义、试验方法和验收准则

Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria (IEC 61109:2008); German version EN 61109:2008

DIN EN 61952:2009 架空电线用绝缘子 标称电压大于1000V的交流系统用复合线柱绝缘子 定义、试验方法和验收标准

Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria (IEC 61952:2008); German version EN 61952:2008

BS EN 61109:2008 架空线用绝缘子.标称电压大于1000V的交流系统用复合悬挂及拉伸绝缘子.定义、试验方法和验收标准

This International Standard applies to composite suspension/tension insulators consisting of a load-bearing cylindrical insulating solid core consisting of fibres – usually glass – in a resinbased matrix, a housing (outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core. Composite insulators covered by this standard are intended for use as suspension/tension line insulators, but it should be noted that these insulators can occasionally be subjected to compression or bending, for example when used as phase-spacers. This standard can be applied in part to hybrid composite insulators where the core is made of a homogeneous material (porcelain, resin), see Clause 8. The object of this standard is to – define the terms used, – prescribe test methods, – prescribe acceptance criteria. This standard does not include requirements dealing with the choice of insulators for specific operating conditions.

Insulators for overhead lines — Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria