K60 电气设备与器具综合 标准查询与下载

SANS 61010-2-081:2005 测量，控制和实验室用电气设备的安全性要求．第2．081部分：分析和其它用途的自动和半自动试验室设备的特殊要求

Applies to automatic and semi-automatic laboratory equipment for analysis and other purposes.

Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

IEC 60567:2005 充油电气设备.分析游离气体和溶解气体用气体和油的取样.指南

This International Standard deals with the techniques for sampling free gases from gas-collecting relays and for sampling oil from oil-filled equipment such as power and instrument transformers, reactors, bushings, oil-filled cables and oil-filled tank-type capacitors. Three methods of sampling free gases and three methods of sampling oil are described; the choice between the methods often depends on the apparatus available and on the quantity of oil needed for analysis. Before analysing the gases dissolved in oil, they must first be extracted from the oil. Three basic methods are described, one using extraction by vacuum (Toepler and partial degassing), another by displacement of the dissolved gases by bubbling the carrier gas through the oil sample (stripping), and the last one by partition of gases between the oil sample and a small volume of the carrier gas (head space). The gases are analysed quantitatively after extraction by gas chromatography; a method of analysis is described. Free gases from gas-collecting relays are analysed without preliminary treatment. The preferred method for assuring the performance of the gas extraction and analysis equipment, considered together as a single system, is to degas samples of oil prepared in the laboratory and containing known concentrations of gases ("gas-in-oil standards") and quantitatively analyse the gases extracted. Two methods of preparing gas-in-oil standards are described. For daily calibration checks of the chromatograph, it is convenient to use a standard gas mixture containing a suitable known amount of each of the gas components to be in a similar ratio to the commons ratios of the gases extracted from transformer oils. The techniques described take account, on the one hand, of the problems peculiar to analyses associated with acceptance testing in the factory, where gas contents of oil are generally very low and, on the other hand, of the problems imposed by monitoring equipment in the field, where transport of samples may be by un-pressurized air freight and where considerable differences in ambient temperature may exist between the plant and the examining laboratory.

Oil-filled electrical equipment - Sampling of gases and of oil for the analysis of free and dissolved gases - Guidance

NF C01-826:2004 电工词汇.第826部分:电气装置

Electrotechnical Vocabulary - Part 826 : electrical installations.

SANS 61010-1:2004 测量，控制和实验室用电气设备的安全性要求．第1部分：一般规则

Specifies general safety requirements for electrical equipment intended for professional, industrial process, and educational use, including equipment and computing devices for measurement and test, control, laboratory use and accessories intended for us

Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements

SANS 10317:2004 消费品的使用说明．电气设备

Establishes the principles of, and gives recommendations on the design and formulation of instructions for, the use of consumer products with specific reference to electrical appliances. It is intended for committees preparing standards for consumer prod

Instructions for the use of consumer products - Electrical appliances

CSA C22.2 No.61010-2-081-01-2004 测量,控制和实验室用电气设备的安全规则.第2-081部分:分析和其他用途的自动和半自动实验室设备的特殊要求.第1版

L’Association canadienne de normalisation (CSA), sous les auspices de laquelle cette Norme nationale a été préparée, a reçu ses lettres patentes en 1919 et son accréditation au sein du Système de Normes nationales par le Conseil canadien des normes en

Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-081: Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes First Edition; IEC 61010-2-081:2001

CSA C22.2 No.61010-2-045-04-2004 电气测量、调节和实验室设备安全规则 第2-045部分：医疗、制药、兽医和实验室领域使用的消毒/清洗设备的特殊要求

L’Association canadienne de normalisation (CSA), sous les auspices de laquelle cette Norme nationale a été préparée, a re?u ses lettres patentes en 1919 et son accréditation au sein du Système de Normes nationales par le Conseil canadien des normes en

Safety rules for electrical measuring, regulating and laboratory devices - Part 2-045: Particular requirements for disinfection/washing devices used in the medical, pharmaceutical, veterinary and laboratory fields

CSA C22.2 No.61010-2-081-04-2004 测量,控制和实验室用电气设备的安全规则.第2-081部分:分析和其他用途的自动和半自动实验室设备的特殊要求.第1版.IEC 61010-2-081:2001

This Standard covers the features of three-phase submersible transformers rated 75 to 3000 kV?A. Note: For details not covered herein, reference should be made to CSA C2.1.

Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-081: Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes First Edition

KS C IEC 61084-2-4:2004 电气装置用电缆干线系统和电缆管道系统.第2-4部分:工作电极特殊要求

KS C IEC 61084-1의 이 항목은 다음을 제외하고 적용한다.대 체 이

Cable trunking and ducting systems for electrical installations Part 2:Particular requirements-Section 4:Service poles

CSA C22.2 No.0.4-04-2004 电气设备的连接.第3版.通用指令第1号.第1次修订

Bonding of electrical equipment Third Edition; General Instruction No 1; Update No 1

Bonding of electrical equipment General Instruction No 1; Third Edition

IEC 61496-1:2004 机械的安全.电敏保护设备.第1部分:一般要求和试验

Defines a real-time optical serial interface between the control unit and its associate drives which is utilized to transmit periodic and non-periodic data. This interface is intended to apply to industrial machines, such as machine tools, with multiple

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests

DLA AN3105 REV 4 VALID NOTICE 2-2004 接地端

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

TERMINAL-GROUND

SANS 61010-2-101:2003 测量，控制和实验室用电气设备的安全性要求．第2．101部分：实验室诊断（IVD）医疗设备的特殊要求

Applies to equipment intended for in vitro diagnostic (IVD) medical purposes, including self-test IVD medical purposes. IVD medical equipment, whether used alone or in combination, is intended by the manufacturer to be used in vitro for the examination o

Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment

SANS 61010-2-032:2003 测量，控制和实验室用电气设备的安全性要求．第2．032部分：电气测量和试验用手持和用手控制电流感应器的特殊要求

Applies to three types of hand-held and hand-manipulated current sensors to be used in the measurement of current without physically opening the current path of the circuit being measured. They may be stand-alone current sensors or accessories to other e

Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

KS C IEC 60425:2003 电容器和电阻器标记用颜色的选择导则

이 지침은 전자 기기용 커패시터 및 저항기의 부호화와 식별에 사용되는 색깔을 다룬다.

Guide for the choice of colours to be usedfor the marking of capacitors and resistors

KS C IEC 60301:2003 电容器和电阻器引出线端的优先直径

이 추천 사항은 커패시터 및 저항기 선 단자 지름의 권장 수열을 제시한다. 이 권장값은

Preferred diameters of wire terminations of capacitors and resistors

KS C 2212-2002 电容器用涂金属膜聚酯薄膜(交流型)

이 규격은 전자 기기용 메탈라이즈드 플라스틱 필름 커패시터에 사용하는 커패시터용 메탈라이즈

Metallized polyester film for capacitors

KS C 2602-2002 电热丝及带的加速寿命试验

이 규격은 전열선 및 띠의 수명 시험 방법에 대하여 규정한다.

Accelerated life test of electric heating wires and rolled wires

IEC 61491:2002 工业机械的电气设备.控制和传动间实时通信用串行数据链

Defines a real-time optical serial interface between the control unit and its associate drives which is utilized to transmit periodic and non periodic data. Experts in IEC Technical Committee 44 (Safety of machinery Electrotechnical aspects) explain that

Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives

KS C 9804-2002 电热水器

이 규격은 정격 입력이 10 kW 이하의 용기와 발열체를 일체로 한 음료수용 전기 물끓이기

Electric-water heaters