K60 电气设备与器具综合 标准查询与下载

BS IEC 61892-2:2012 移动式及固定式近海装置.电气设施.系统设计

Mobile and fixed offshore units. Electrical installations. System design

IEC 61496-1:2012 机械的安全.电敏保护设备.第1部分:一般要求和试验

This part of IEC 61496 specifies general requirements for the design@ construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions@ the requirements for which are given in Annex A. The particular requirements for specific types of sensing function are given in other parts of this standard. This standard does not specify the dimensions or configuration of the detection zone and its disposition in relation to hazards in any particular application@ nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. While a data interface can be used to control optional safety-related ESPE functions (Annex A)@ this standard does not provide specific requirements. Requirements for these safety-related functions can be determined by consulting other standards (for example@ IEC 61508@ IEC/TS 62046@ IEC 62061@ and ISO13849-1). This standard may be relevant to applications other than those for the protection of persons@ for example for the protection of machinery or products from mechanical damage. In those applications@ different requirements can be necessary@ for example when the materials that have to be recognized by the sensing function have different properties from those of persons. This standard does not deal with electromagnetic compatibility (EMC) emission requirements.

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests

IEC 61010-2-033:2012 测量,控制和实验室使用的电气设备安全性要求.第2-033部分:家用和专业用途,能够测量电源电压的手持式万用表和其他手持式计量仪器的详细要求

Scope and object This clause of Part 1 is applicable except as follows: Equipment included in scope Replacement: Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for METERS. The METERS that have a primary purpose of measuring voltage on a live MAINS CIRCUIT are within the scope of this standard. They have various names@ but all of them have capability for measurements of voltages on a live MAINS CIRCUIT. Some of the names given to this equipment are as follows: ?C MULTIMETER; ?C digital MULTIMETER; ?C VOLTMETER; ?C clamp METER (see also Part 2-032). For the purpose of this standard@ the term METER is used for these HAND-HELD measuring instruments. NOTE Parts of the equipment that are not within the scope of this Part 2-033 are considered to be covered by the requirements of Part 1 or other part 2's of IEC 61010 and then will also need to meet the requirements of these other parts. Equipment excluded from scope Addition: Add the following new item to the list: aa) IEC 61557 (Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ?C Equipment for testing@ measuring or monitoring of protective measures ?C Parts 1 through 12). Addition: Add the two following paragraphs at the end of the subclause: Equipment that is not capable of measuring MAINS voltages is not within the scope of this Part 2-033. See IEC 61010-2-030 for requirements pertaining to such equipment. Such equipment@ including other HAND-HELD equipment such as oscilloscopes@ wattmeters@ process control MULTIMETERS@ and communications test sets is not within the scope of this Part 2-033. Aspects included in scope Addition: Add the following paragraph at the end of the subclause: Requirements for protection against HAZARDS resulting from NORMAL USE and REASONABLY FORESEEABLE MISUSE of measuring circuits are given in Clause 101.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other hand-held meters, for domestic and professional use, capable of measuring mains voltage

KS C IEC 62467-1:2012 医用电气设备.近距离放射治疗用剂量计.第1章:以井型电离室为基础的仪器

이 표준은 주어진 종류의 선원에 대하여 적절한 교정이 이루어진 후에 광자 방사선 분야에서

Medical electrical equipment－Dosimetric instruments as used in brachytherapy－Part 1：Instruments based on well-type ionization chambers

ANSI/UL 61010-2-030-2012 用于测量,控制和试验室使用的电气设备.第2-030部分:测试和测量用详细要求

First Edition of the UL IEC-Based Standard for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-030: Particular Requirements for Testing and Measuring Circuits, UL 61010-2-030, to be harmonized for Canada and the United States and co-published with ISA.

Standard for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-030: Particular Requirements for Testing and Measuring Circuits

GOST R 55194-2012 交流电压范围为1 kV至750 kV的电气设备和装置. 通用介质试验方法

Electrical equipment and installation for a.c. voltages from 1 to 750 kV. General methods of dielectric tests

ANSI/ISA 61010-2-030(82.02.03)-2012 测量,控制和实验室用电气设备的安全性要求.第2-030部分:试验和测量电路的详细要求

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits

IEC 60567:2011 注油电气设备.气体抽样以及游离和溶解气体分析指南

Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance

IEC 66/456/DTS:2011 IEC/TS 61010-1-1:测量,控制和实验室用电气设备的安全要求.第1-1部分:技术规范:教育机构中儿童和和青年人专用设备的一般要求

IEC/TS 61010-1-1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1-1: Technical Specification: General requirements for equipment intended for use by children and young people in educational establishments

DIN EN 61010-2-030:2011 测量,控制和实验室用电气设备的安全要求.第2-030部分:试验和测量电路的特定要求(IEC 61010-2-030-2010 + Cor.-2011);德文版本EN 61010-2-30-2010

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits (IEC 61010-2-030:2010 + Cor. :2011); German version EN 61010-2-030:2010

JIS C 1010-31:2011 测量,控制和实验室用电气设备的安全性要求.第31部分:电气测量和试验用手持探测器装置安全性要求

Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 31: Safety requirements for hand-held probe assemblies for electrical measurement and test

DIN VDE 0100-510:2011 低压电力设备.第5-51部分:电气设备的选择和安装.通用规则(IEC 60364-5-51-2005, 修改件).德文版本实施 HD 60364-5-51-2009

Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules (IEC 60364-5-51:2005, modified); German implementation HD 60364-5-51:2009

DB37/T 1714-2010 水煤浆气化炉安全技术规程

Safety technical regulations for coal water slurry gasifier

BS EN 61010-1:2010 测试,控制和实验室用电气设备安全性要求.一般要求

1.1.1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a) Electrical test and measurement equipment This is equipment which by electromagnetic means tests, measures, indicates or records one or more electrical or physical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies for laboratory use, transducers, transmitters, etc. NOTE 1 This includes bench-top power supplies intended to aid a testing or measuring operation on another piece of equipment. Power supplies intended to power equipment are within the scope of IEC 61558 (see 1.1.2 h)). This standard also applies to test equipment integrated into manufacturing processes and intended for testing manufactured devices. NOTE 2 Manufacturing test equipment is likely to be installed adjacent to and interconnected with industrial machinery in this application. b) Electrical industrial process-control equipment This is equipment which controls one or more output quantities to specific values, with each value determined by manual setting, by local or remote programming, or by one or more input variables. c) Electrical laboratory equipment This is equipment which measures, indicates, monitors, inspects or analyses materials, or is used to prepare materials, and includes in vitro diagnostic (IVD) equipment. This equipment may also be used in areas other than laboratories; examples include selftest IVD equipment to be used in the home and inspection equipment to be used to check people or material during transportation. 1.1.2 Equipment excluded from scope This standard does not apply to equipment within the scope of: a) IEC 60065 (Audio, video and similar electronic apparatus); b) IEC 60204 (Safety of machinery – Electrical equipment of machines); c) IEC 60335 (Household and similar electrical appliances); d) IEC 60364 (Electrical installations of buildings); e) IEC 60439 (Low-voltage switchgear and controlgear assemblies); f) IEC 60601 (Medical electrical equipment); g) IEC 60950 (Information technology equipment including electrical business equipment, except as specified in 1.1.3); h) IEC 61558 (Power transformers, power supply units and similar); i) IEC 61010-031 (Hand-held probe assemblies); j) IEC 61243-3 (Live working – Voltage detectors – Part 3: Two-pole low-voltage type).

Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements

BS EN 61010-2-030:2010 测量,控制和实验室用电气设备的安全性要求.线路测量和测试的详细要求

This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replace the text with the following: This part of IEC 61010 specifies safety requirements for testing and measuring circuits which are connected for test or measurement purposes to devices or circuits outside the measurement equipment itself. These include measurement circuits which are part of electrical test and measurement equipment, laboratory equipment, or process control equipment. The existence of these circuits in equipment requires additional protective means between the circuit and an OPERATOR.

Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for testing and measuring circuits

BS EN 62453-1:2009 现场设备工具(FDT)界面规范.概述和指南

This part of IEC 62453 presents an overview and guidance for the IEC 62453 series. It • explains the structure and content of the IEC 62453 series (see Clause 5); • provides explanations of some aspects of the IEC 62453 series that are common to many of the parts of the series; • describes the relationship to some other standards.

Field device tool (FDT) interface specification - Overview and guidance

BS EN 62453-303-2:2009 现场设备工具(FDT)界面规范.通讯子协议综合.IEC 61784 CP 3/4,CP 3/5和CP 3/6

Communication Profile 3/4, Communication Profile 3/5 and Communication Profile 3/6 (commonly known as PROFINET®1 IO) define communication profiles based on IEC 61158-5-10 and IEC 61158-6-10. The basic profiles CP 3/4, CP 3/5, and CP 3/6 are defined in IEC 61784-2. This part of IEC 62453 provides information for integrating the PROFINET® technology into the FDT interface (IEC 62453-2). This part of the IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it.

Field device tool (FDT) interface specification - Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6

BS EN 62453-309:2009 现场设备工具(FDT)接口规范.通信文件集成.IEC 61784 CPF 9

Communication Profile Family 9 (commonly known as HART®1) defines communication profiles based on IEC 61158-5-20 and IEC 61158-6-20. The basic profile CP 9/1 is defined in IEC 61784-1. This part of IEC 62453 provides information for integrating the HART® technology into the FDT standard (IEC 62453-2). This part of the IEC 62453 specifies communication and other services. This standard neither contains the FDT specification nor modifies it.

Field device tool (FDT) interface specification - Communication profile integration - IEC 61784 CPF 9

BS EN 62453-315:2009 菲尔德设计工具(FDT)接口规范.通讯子协议集成.IEC 61784 CPF 15

Communication Profile Family 15 (commonly known as Modbus1) defines communication profiles based on IEC 61158-5-15 and IEC 61158-6-15. The basic profile CP 15/1 (Modbus TCP) is defined in IEC 61784-1. An additional communication profile (Modbus Serial Line) is defined in [2]. This part of the IEC 62453 provides information for integrating Modbus TCP® and Modbus Serial Line® protocol support into FDT based systems. NOTE This part of IEC 62453 only specifies the mapping of Modbus parameters to FDT data types. For restrictions of protocol specific parameters concerning allowed values and concerning limitations of arrays used in the definition of FDT data types, refer to IEC 61158-5-15 and the MODBUS Application Protocol Specification.

Field device tool (FDT) interface specification - Communication profile integration - IEC 61784 CPF 15

BS EN 62453-2:2009 现场设备工具(FDT)接口规范.概念和详细说明

This part of IEC 62453 explains the common principles of the field device tool concept. These principles can be used in various industrial applications such as engineering systems, configuration programs and monitoring and diagnostic applications. This standard specifies the general objects, general object behavior and general object interactions that provide the base of FDT.

Field device tool (FDT) interface specification - Concepts and detailed description