K60 电气设备与器具综合 标准查询与下载

UL 61010-031 (ND)-2007 测量, 控制和实验室用电气设备UL 61010-031安全性要求的国家差异. 第031部分: 电工测量和试验用手持探头组件的安全要求 (第一版; 通过和包括2014年11月7日的修订再版)

National Differences For UL 61010-031 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and (First Edition; Reprint with Revis

UL 61010-031-2007 测量、控制和实验室用电气设备的安全要求.第031部分:电气测量和试验用手持式探头组件的安全要求

The document specifies safety requirements for probe assemblies for (electrical) measurement and test. It applies to hand-held and hand-manipulated probe assemblies of the types described below, and related accessories which are intended for professional, industrial process, and educational use. These probe assemblies are for use in the interface between an electrical phenomenon and test or measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment. a) Low-voltage and high-voltage, non-attenuating probe assemblies (type A). Non-attenuating probe assemblies that are rated for direct connection to voltages exceeding 33 V r.m.s. or 46,7 V peak or 70 V d.c., but not exceeding 63 kV. They do not incorporate active components, nor are they intended to provide a voltage divider function or a signal conditioning function, but they may contain passive non-attenuating components such as fuses. b) High-voltage attenuating or divider probe assemblies (type B). Attenuating or divider probe assemblies that are rated for direct connection to secondary voltages exceeding 1 kV but not exceeding 63 kV. The divider function may be carried out wholly within the probe assemblies, or partly within the test or measurement equipment to be used with the probe assemblies. c) Low-voltage attenuating or divider probe assemblies (type C). Attenuating, divider or other signal conditioning probe assemblies for direct connection to voltages exceeding 33 V r.m.s or 46,7 V peak or 70 V d.c., but not exceeding 1 kV r.m.s. or 1,5 kV d.c. The signal conditioning function may be carried out wholly within the probe assemblies, or partly within the test or measurement equipment intended to be used with the probe assemblies. This standard does not cover a) reliable function, performance or other properties of the probe assembly; b) effectiveness of transport packaging; c) servicing (repair); d) protection of servicing (repair) personnel.

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

CSA C22.2 No.61010-031-07-CAN/CSA-2007 电气测量、调节和实验室设备安全规则 第031部分：电气测量和测试用手持式探头的安全要求，第一版

Canadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve co

Safety rules for electrical measuring, regulating and laboratory apparatus - Part 031: Safety requirements for hand-held equipped probes for electrical measurement and testing, first edition

DIN EN 61010-2-020:2007 测量、控制、调节和试验室用电气设备安全要求.第2-020部分:实验室离心机特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006); German version EN 61010-2-020:2006

CSA C22.1-06 UPD 1-2007 加拿大电气规范.第1部分.电气安装的安全标准

Canadian Electrical Code, Part I Safety Standard for Electrical Installations

Canadian Electrical Code, Part I Safety Standard for Electrical Installations

NF C46-050-2-4:2007 测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第2-4部分:特殊要求.根据IEC 61557-8的绝缘监测设备和根据IEC 61557-9的绝缘失效定位设备用试验配置、操作条件和性能标准

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4 : particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and

BS EN 61326-2-5:2006 测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第2-5部分:特殊要求.带有根据IEC 61784-1、CP 3/2规定接口的现场设备用试验结构、操作条件和性能标准

In addition to the requirements of IEC 61326-1, this part of IEC 61326 treats the particular features for EMC testing of field devices with interfaces according to IEC 61784-1, CP 3/2. This part of IEC 61326 covers only the field-bus interface of the equipment. NOTE The other functions of the equipment are covered by other parts of the IEC 61326 series. This part of IEC 61326 refers only to field devices intended for use in process control and process measuring. For interface operation and the interface parameters, this part of IEC 61326 is in accordance with IEC 61784-1, CP 3/2. That standard specifies a set of protocol specific communication profiles based on the IEC 61158 series. The manufacturer specifies the environment for which the product is intended to be used and/or selects the appropriate test level specifications of IEC 61326-1.

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, C

BS EN 61326-2-4:2006 测量、控制和实验室用电气设备.电磁兼容性(EMC)的要求.第2-4部分:特殊要求.根据IEC 61557-8的绝缘监测设备和根据IEC 61557-9的绝缘失效定位设备用试验结构、操作条件和性能标准

Clause 1 of IEC 61326-1 applies except as follows: Addition: This part of IEC 61326 specifies more detailed test configurations, operational conditions and performance criteria than IEC 61326-1 for equipment for – insulation monitoring according to IEC 61557-8; – insulation fault location according to IEC 61557-9. This applies to insulation monitoring devices and insulation fault location systems permanently or semi-permanently connected to the distribution system.

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and

ANSI/ISA 61010-031-2007 测量,控制和实验室用电器设备的安全性要求.第031部分:电气测量和试验用手持探测电极装配的安全性要求

Applies to hand-held and hand-manipulated probe assemblies, and related accessories which are intended for professional, industrial process, and educational use. These probe assemblies are for use in the interface between an electrical phenomenon and test or measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment.

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

UL 61010-1 BULLETIN-2007 UL安全标准.测量,控制和实验室用电气设备.第1部分:一般要求.评议提交截止日期:2007年11月12日

UL Standard for Safety Electrical Equipment For Measurement, Control, and Laboratory Use; Part 1: General Requirements ALL COMMENTS DUE: November 12, 2007

UL Standard for Safety Electrical Equipment For Measurement, Control, and Laboratory Use; Part 1: General Requirements ALL COMMENTS DUE: November 12, 2007

GJB 5426.12-2006 国防科技工业物资分类与代码 第12部分：电气机械

本部分规定了电气机械的分类原则和方法、代码结构和编码方法及其分类代码。 本部分适用于国防科技工业在产品研制、生产、使用等过程中对电气机械的信息处理和信息交换。

Classigc codes of material for National Defense Science, Technology & Industry Part 12: Electrical machinery and apparatus

BS EN 60706-2:2006 设备的维修性.设计和开发阶段期间的维修性要求和研究

This part of IEC 60706 examines the maintainability requirements and related design and use parameter, and discusses some activities necessary to achieve the required maintainability characteristics and their relationship to planning of maintenance. It describes the general approach in reaching these objectives and shows how maintainability characteristics should be specified in a requirements document or contract. It is not intended to be a complete guide on how to specify or to contract for maintainability. Its purpose is to define the range of considerations when maintainability characteristics are included as requirements for the development or the acquisition of an item. The standard goes on to describe maintainability studies in the preliminary and detailed design phases and their relationships to other maintainability and maintenance support tasks, described in associated standards. Maintainability considerations in design reviews are also included. It is intended that customers acquiring items of equipment will find this standard useful in assisting them to define their maintainability objectives and associated maintainability programmes.

Maintainability of equipment - Maintainability requirements and studies during the design and development phase

BS EN 60706-3:2006 设备的维修性.数据验证、收集、分析和表示

This part of IEC 60706 describes the various aspects of verification necessary to ensure that the specified maintainability requirements of an item have been met and provides suitable procedures and test methods. While maintainability verification as such should be a mandatory part of any maintainability programme (see IEC 60300-3-10), each individual case requires appropriate methods to be carefully selected in order to ensure overall costeffectiveness. This standard also addresses the collection, analysis and presentation of maintainability related data, which may be required during, and at the completion of, design and during item production and operation.

Maintainability of equipment - Verification and collection, analysis and presentation of data

BS EN 61010-2-020:2006 测量、控制和实验室用电气设备的安全性要求.实验室离心机的特殊要求

To be read in conjunction with BS EN 61010-1

Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for laboratory centrifuges

EN 61326-2-3:2006 测量、控制和实验室用电气设备.EMC要求.第2-3部分:特殊要求.带集成或远程信号调节的传感器

In addition to the requirements of IEC 61326-1, this part of IEC 61326 specifies more detailed test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning. This standard applies only to transducers characterized by their ability to transform, with the aid of an auxiliary energy source, a non-electric quantity to a process-relevant electrical signal, and to output the signal at one or more ports. This standard includes transducers for electrochemical and biological measured quantities. The transducers covered by this standard may be powered by a.c. or d.c. voltage and/or by battery or with internal power supply. Transducers referred to by this standard comprise at least the following items (see Figures 101 and 102): – one or more elements for transforming a non-electrical input quantity to an electrical quantity; – a transmission link for transferral of the electrical quantity to a component for signal conditioning; – a unit for signal conditioning that converts the electrical quantity to a process-relevant electrical signal; – an enclosure for enclosing the above-stated components fully or in parts. Transducers referred to by this standard may also have the following items (see Figures 101 and 102): – a communication and control unit; – a display unit; – control elements such as keys, buttons, switches, etc.; – transducer output signals (for example, switch outputs, alarm outputs) which are clearly assigned to the input signal(s); – transducers with signal conditioning which may be integrated or remote. The manufacturer specifies the environment for which the product is intended to be used and utilizes the corresponding test levels of IEC 61326-1. Additional requirements and exceptions for specific types of transducers are given in the annexes to this standard.

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-3: Particular requirements — Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditi

CSA C22.1-06-2006 加拿大电气规范第一部分电气装置安全标准第二十版

This Code covers all electrical work and electrical equipment operating or intended to operate at all voltages in electrical installations for buildings, structures, and premises, including factory-built relocatable and non-relocatable structures, and s

Canadian Electrical Code Part I Safety Standard for Electrical Installations Twentieth Edition

IEC 61496-2:2006 机械的安全.电敏保护设备.第2部分:使用有源光电子保护器件的设备的特殊要求

This clause of Part 1 is replaced by the following: This part of IEC 61496 specifies requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety-related system, employing active opto-electronic protective devices (AOPDs) for the sensing function. Special attention is directed to features which ensure that an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in Annex A of IEC 61946-1 and of this part. This part does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. Excluded from this part are AOPDs employing radiation at wavelengths outside the range 400 nm to 1500 nm. This part may be relevant to applications other than those for the protection of persons, for example, the protection of machinery or products from mechanical damage. In those applications, additional requirements may be necessary, for example, when the materials that are to be recognized by the sensing function have different properties from those of persons. This part does not deal with EMC emission requirements.

Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)

CSA C22.1HB-06SP-2006 加拿大电气规范手册-对加拿大电气规范章程的解说.第1部分.第20版

CE Code Handbook - An Explanation of Rules of the Canadian Electrical Code, Part 1 Twentieth Edition

CE Code Handbook - An Explanation of Rules of the Canadian Electrical Code, Part 1 Twentieth Edition

KS C IEC 62262:2005 电器设备外壳对外界机械碰撞的防护等级(IK代码)

이 규격은 보호 장비의 정격 전압이 72.5 kV 이하일 때, 외부 기계적 충격에 대한 전

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code)

IEC 60519-8:2005 电热设备的安全 第8部分:对电渣重熔炉的特殊要求

GB 5959的本部分规定了对电渣重熔炉(以下简称电渣炉)有关人身装置安全的特殊要求。 本部分适用于通过直接加热导电炉渣来重熔或精炼金属的电热装置。 本部分应与GB 5959．1—2005《电热装置的安全第l部分：通用要求》配合使用。 本部分中的试验方法按GB／T 10066．1—2004《电热装置的试验方法 第1部分：通用部分》和 GB／T 10066．8—2006《电热装置的试验方法 第8部分：电渣重熔炉》中的相关规定。

Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces