L00 标准化、质量管理 标准查询与下载

GEIA EIA-649-A-2004 配置管理的国家一致标准

This standard defines Configuration Management (CM) terminology and describes a CM process using five CM functions and their underlying fundamental principles.

National Consensus Standard for Configuration Management

CEA-706-A-2004 成分标识标准

This standard describes the requirements for using formatted two-dimensional machine-readable symbols for the marking of electronic components of first level assemblies. Note: This standard is not intended to address product marking applications. (See CEA-802-A) Note: Marking of reels, tubes, and trays containing components is subject to Product Package marking. (See CEA-624-A)

Component Marking Standard NO LONGER AVAILABLE ?CONTACT WWW.MHIA.ORG TO ORDER

IECQ 01-2003 电子元器件IEC质量评定体系(IECQ).基本规则

IEC Quality assessment system for Electronic Components (IECQ) - Basic rules

IECQ-CECC 01-2003 IEC电子元器件质量评定体系(IECQ-CECC).基本规则

IEC Quality Assessment System for Electronic Components (IECQ-CECC) - Basic Rules

CEA-621-A-2003 产品及包装条码标准

This standard was developed under the auspices of the Consumer Electronics Association (CEA) R9 Automatic Data Capture Committee.

Product and Packaging Bar Code Standard

QC 001004-2003 IEC电子元器件质量评定体系(IECQ).规范表

IEC Quality Assessment System for Electronic Components (IECQ) - Specifications list

QC 001006-2003 IEC电子元器件质量评定体系(IECQ-CECC).参加国登记表

IECQ Quality Assessment System for Electronic Components (IECQ-CECC) - Register of participating countries

QC 001002-4-2003 电子元器件IEC质量评定体系.航空电子设备评定程序要求

IEC Quality Assessment System for Electronic Components (IECQ) - Avionics assessment program requirements

AIR FORCE DI-TMSS-81641-2003 容差标准码(ASC)升级包

This data package allows the calibration technical order writers to provide input to the government allowance standard monitor. The data provides recommended test equipment listing (TEL) for specific calibration technical orders.

ALLOWANCE STANDARD CODE (ASC) UPDATE PACKAGE

ETSI SR 002 298-2003 CEN和ETSI对委托单位向理事会,欧洲议会,欧洲经济和社会委员会及区域委员会的通信响应.网络和信息安全.欧洲政策的应用建议

Response from CEN and ETSI to the "Communication from the Commission to the Council, the European Parliament, the European Economic and Social Committee and the Committee of the Regions: Network and Information Security: Proposal for a European Policy App

ECA EIA-481-C-2003 自动处理用表面固定元件的8mm-200mm凸式传送带与8mm和12mm打孔传送带

This Standard covers requirements for taping surface mount components. Complementary standards for specialized taping requirements are included in the addendum.

8 mm Through 200 mm Embossed Carrier Taping and 8 mm& 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling

DB11/T 146.12-2002 建筑及住宅小区智能化工程检测验收规范 第12部分：关键产品质量检测

本部分规定了建筑及住宅小区智能化工程中所应用的关键产品（见附录A）及关键产品的主要技术要求。本部分适用于安装前的关键产品的质量检测。

Specifications for Inspection and Acceptance of Intelligent Engineering in Buildings and Residential Quarters Part 12: Quality Inspection of Key Products

QC 001004-2002 电子元器件IEC质量评定体系(IECQ).规范表

IEC Quality Assessment System for Electronic Components (IECQ) - Specifications list

QC 001002-3 AMD 1-2002 电子元器件IEC质量评定体系的程序规则.第3部分:验收程序.修改件1:监督检查人员职责的认可和鉴定

Rules of procedure of the IEC Quality Assessment System for Electronic Components (IECQ) - Part 3: Approval procedures; Amendment 1 concerning approval and accreditation of a supervising inspectorate

EP 526-2002 BSI电子手册.信息安全管理工具箱

BSI Electronic Book - Information Security Management Toolkit

EP 201-2002 BSI电子手册.信息安全管理

BSI Electronic Book - Information Security Management

ECA EIA-747-2002 自动处理通常小于1.0 mm厚度的设备的无屏蔽模具及其他表面安装元件的受支持的粘性塑料传送带

This Standard covers requirements for 8mm, 12mm, 16mm and 24mm taping of surface mount components generally less than 1. O mth ick and requiring high precision taping foz automatic handling of devices such as singulated bare die. Refer to EL4481-1 for t

Adhesive Backed Punched Plastic Carrier Taping of Singulated Bare Die and Other Surface Mount Components for Automatic Handling of Devices Generally Less Than 1.0 mm Thick

ECA EIA-704-2002 自动处理封装组件72毫米*200毫米载带

This document provides common dimensioning necessary to package components for automatic handling. Alternate methods of containing components to the carrier are attached.

72 mm Through 200 mm Carrier Tapes for Packaging Components for Automatic Handling

ECA EIA-726-2002 自动处理通常小于2.0 mm x 1.2 mm设备的表面安装元件的8mm穿孔和凸式传送带

This Standard covers requirements for taping surface mount components generally smaller than 2.0 X 1.2 mm and requiring high precision taping for automatic handling. Refer to EIA 481-1 for current industry Standard for 8 mm taping requirements.

8 mm Punched& Embossed Carrier Taping of Surface Mount Components for Automatic Handling of Devices Generally Smaller Than 2.0 mm x 1.2 mm

BS EN 130301:2002 电子器件质量评定的协调体系.空白详细规范.带非固体电解质的铝电解质电容器

1 General data 2 Inspection requirements

Harmonized system of quality assessment for electronic components - Blank Detail Specification - Aluminium electrolytic capacitors with non-solid electrolyte