L00 标准化、质量管理 标准查询与下载

ANSI/EIA 670:1997 质量系统评价

This standard is for the use by the electronic industry for preparation of audity checklists for compliance of quality systems to the requirements of ANSI/ASQC Q9001 (ISO 9001) and others. See 1 Scope for more details.

Quality Systems Assessment

ECA SP2940-1-1997 验证质量的印制板连接件的分规范 高速数据规则的低频模拟和数字应用.评论截止日期 1997年12月15日EIA-700A000

Cecelia Williams SUBJECT: Standards Proposal No. 2940-1, Proposed New Electronic Industries Association 2500 Wilson Blvd.

Sectional Specification for Printed Board Connectors of Certified Quality (For Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rules) Comment Period Expires: December 15, 1997; EIA-700A000

ECA TEP197-A-1997 阴极射线管X射线特征曲线制备

In accordance with the Radiation Control for the Health and Safety Act of 1968, cathode ray tube (CRT) manufacturers are required to submit an initial report to the Center for Devices and Radiological Health (CDRH), an agency of the U.S. Department of Hea

Preparation of X-Radiation Characteristic Curves for Cathode Ray Tubes

BS EN 125500:1996 电子元器件质量评定协调体系.分规范:干扰抑制和低级信号传输用环形氧化物磁芯

Prescribes the characteristics, ratings and inspection requirements of assessed quality ring cores made of soft magnetic oxides and iron powders.

Harmonized system of quality assessment for electronic components - Sectional specification: magnetic oxide ring cores for interference suppression and low level signal transformer applications

BS QC 210000:1996 技术认可一览表.电子元器件按IEC 质量评定体系的要求

Technology approval schedules Requirements under the IEC Quality Assessment System for Electronic Components (IECQ) Introduction Specification 1 General 2 Preparation of TASs Annexes A (normative) Structure of TA documents B (normative) Content of a TAS C (normative) Style, form and content of TAS front page D (normative) Guidelines for the generation of customer detail specifications (CDSs) E (normative) TAS notification forms F (normative) Foreword to a TAS G (normative) Preface to a TAS

Technology approval schedules - Requirements under the IEC Quality Assessment System for Electronic Components (IECQ)

QC 200000-1996 电子元器件业内专业承包商的过程和/或产品认证用IEC电子元器件质量评定体系要求的过程评定程序

Process assessment schedules for requirements under the IEC Quality Assessment System for Electronic Components (IECQ) for approval of specialist contractor's processes and/or products within the electronic components industry

BS EN 122190:1996 电子元器件质量评定协调体系.7-16系列射频同轴连接器分规范

Provides information and rules for the preparation of detail specifications for screw coupled coaxial connectors series 7-16.

Harmonized system of quality assessment for electronic components - Sectional specification: radio frequency coaxial connectors - Series 7-16

BS CECC 00808:1996 电子元件用质量评估协调体系.指南文件:塑料压缩设备的应用

Guidance document for the use and application of plastic encapsulated devices.

Harmonized system of quality assessment for electronic components - Guidance document: use and application of plastic encapsulated devices

ECA 7000000-A-1996 已质量认证的电子和电气连接器(3MHz频率以下)总规范

This generic specification is applicable to connectors of assessed quality designed for use in direct current and analog and digital applications for frequencies essentially below 3 MHz and in digital applications requiring higher data rate frequencies. T

Generic Specification for Electronic and Electrical Connectors of Certified Quality (for Frequencies Essentially Below 3 MHz)

ECA 520F000-A-1996 已质量认证的旋转式开关分规范(2安培以下的低电流)

This sectional specification relates to electromechanical rotary switches of certified quality. These families of switches are for use in electronic, communication and other low power applications.Switches covered by this specification have ratea voltages

Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less)

AIR FORCE FIPS-PUB-81 CHG NOTICE 2-1996 数据加密标准(DES)操作模式

This change notice provides editorial changes, updated references to documents and organizations, a correction tofigure 3, and additional guidance to agencies regarding the 64-bit Output Feedback Mode tofIPS 81, DES Modes of Operation.

DES MODES OF OPERATION

BS 9000-3:1996 经质量评估的电子元件系统的一般要求.第3部分:IECQ体系国家贯彻规范

This Part of BS 9000 details the national organizations relevant to the implementation of the IECQ system for electronic components within the UK. NOTE 1. This standard should be read in conjunction with the relevant Rules of Procedure listed in clause 2. NOTE 2. The titles of the publications referred to in this standard are listed on the inside back cover.

General requirements for a system for electronic components of assessed quality - Specification for the national implementation of the IECQ system

BS EN 188102:1996 电子元件的质量评定协调体系.类规范.单模弥散移动光缆(B2型)

Harmonized system of quality assessment for electronic components - Family specification: single-mode dispersion shifted (B2) optical fibre

AIR FORCE MS27560 REV A NOTICE 3-1996 2-3/8正方形仪器药筒的标准尺寸

This notice should be filed in front of MS27560A dated IS January 1968.

2-3/8 SQUARE INSTRUMENT CASE, STANDARD DIMENSIONS FOR

GEIA EIA_IS-118-1996 CDIF综合元模型-介绍地点和连通主题领域内的临时标准

This document is intended to be used by anyone wishing to understand and/or use CDIF.

CDIF - Integrated Meta-Model - Presentation Location and Connectivity Subject Area Interim Standard

ARMY MIL-STD-636 CHG NOTICE 4-1996 口径为50的轻武器弹药的视觉检验标准

This standard provides procedures for determining and evaluating defects in small arms ammunition up to and including caliber .50, and the standard shall be used as a supplement to pertinent specifications.

VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50

ANSI/EIA 7000000-A:1996 经质量认证的电子和电气连接器(3MHz频率以下)总规范

Applies to connectors of assessed quality designed for use in direct current and analog and digital applications for frequencies essentially below 3 MHz and in digital applications requiring higher data rate frequencies.

Generic Specification for Electronic and Electrical Connectors of Certified Quality (for Frequencies Essentially below 3 MHz)

GEIA EIA_IS-114-1996 CDIF综合汇总数据模型建模主题领域内的临时标准

This document is intended to be used by anyone wishing to understand andor use CDIF.

CDIF Integrated Meta-model Data Modeling Subject Area Interim Standard

QC 210000-1995 技术认可一览表.电子元器件IECQ质量评定体系的要求

Technology approval schedules - Requirements under the IECQ Quality Assessment System for Electronic Components (IECQ)

BS EN 122003:1995 电子元器件质量评定协调体系规范.用户详细规范制定用空白详细规范和标准产品能力鉴定用条款详细规范

This standard lists the ratings, characteristics and inspection requirements which shall be included as mandatory requirements in any detail specification for this type of connector. Detail specifications shall conform to the requirements of this blank detail specification and BS CECC 00111 Rule of Procedure 11. Specifications Part 4 : 1991 Regulations for CECC detail specifications. The British Standard which implements the CECC Rules of Procedure is BS 9000 General requirements for a system for electronic components of assessed quality Part 2 : 1995 Specification for the national implementation of the CECC system. note:1) In preparation

Specification for harmonized system of quality assessment for electronic components - Blank detail specification for the preparation of customer detail specifications (CDS) and detail specifications for standard production items with capability approval