L19 磁性元器件 标准查询与下载

DIN EN IEC 63093-2:2021 铁氧体磁芯. 表面不规则的尺寸和极限指南. 第2部分: 电信、电源和滤波器用盆形芯(IEC 63093-2-2020); 德文版本EN IEC 63093-2-2020

This part of IEC 63093 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of pot-cores made of ferrite, and the dimensional limits for coil formers to be used with them, as well as effective parameter values to be used in calcu

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications (IEC 63093-2:2020); German version EN IEC 63093-2:2020

DIN EN IEC 63093-9:2021 铁氧体磁芯. 表面不规则的尺寸和极限指南. 第9部分: 平面磁芯(IEC 63093-9-2020); 德文版本EN IEC 63093-9-2020

This part of IEC 63093 specifies the shapes and dimensions of ferrite cores for inductive components (transformers and chokes) of which the coil is typically constructed by multi-layer board or the coil is part of the motherboard and the effective parameter values to be used in c

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (IEC 63093-9:2020); German version EN IEC 63093-9:2020

NF C93-182-2:2020 磁粉芯. 关于尺寸和表面不规则限度的准则. 第2部分: 环形磁芯

Domaine d'applicationLa présente partie de l'IEC 63182 spécifie les dimensions qui sont importantes pour l'interchangeabilité mécanique d'une gamme préférentielle de tores (aussi appelés tores bobinés) en poudre magnétique comprimée. Elle spécifie également les valeurs des paramè

Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2 : ring-cores

JIS C 2501:2019 永久磁铁试验方法

Methods of test for permanent magnet

JIS C 2502:2019 永久磁铁材料

Materials for permanent magnet

IEC 63093-8:2018 铁氧体磁芯. 表面不规则的尺寸和极限指南. 第8部分: E芯

This part of IEC 63093 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of E-cores made of ferrite and the essential dimensions of coil formers to be used with them, as well the effective parameter values to be used in calculations involving them. It also gives guidelines on allowable limits of surface irregularities applicable to E-cores. The specifications contained in this document are useful in negotiations between ferrite core manufacturers and customers about surface irregularities. The use of derived standards, which give more detailed specifications of component parts while still permitting compliance with this standard, is discussed in Annex A.

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores

IEC 63093-11:2018 铁氧体磁芯. 表面不规则的尺寸和极限指南. 第11部分: 用于电源应用的EC芯

This part of IEC 63093 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EC-cores made of ferrite and the essential dimensions of coil formers to be used with them, as well the effective parameter values to be used in calculations involving them. It also gives guidelines on allowable limits of surface irregularities applicable to EC-cores. The specifications contained in this document are useful in negotiations between ferrite core manufacturers and customers about surface irregularities.

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supply applications

IEC 63093-6:2018 铁氧体磁芯. 表面不规则的尺寸和极限指南. 第6部分: 电源用ETD芯

This part of IEC 63093 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ETD-cores made of ferrite and the essential dimensions of coil formers to be used with them, as well the effective parameter values to be used in calculations involving them. It also gives guidelines on allowable limits of surface irregularities applicable to ETD-cores. The specifications contained in this document are useful in negotiations between ferrite core manufacturers and users about surface irregularities. The use of derived standards which give more detailed specifications of component parts while still permitting compliance with this document is discussed in Annex A.

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies

IEC 63093-5:2018 铁氧体磁芯. 表面不规则的尺寸和极限指南. 第5部分: 电感器和变压器用的极压芯和相关部件

This part of IEC 63093 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EP-cores made of ferrite, the essential dimensions of coil formers to be used with them and the locations of their terminal pins on a 2,50 mm printed wiring grid in relation to the base outlines of the cores and the effective parameter values to be used in calculations involving them. It also gives guidelines on allowable limits of surface irregularities applicable to EP-cores. The specifications contained in this document are useful in negotiations between ferrite core manufacturers and users about surface irregularities. The general considerations upon which the design of this range of cores is based are as given in Annex A.

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers

DIN EN 60404-15:2018 磁性材料.第15部分:弱磁材料相对磁导率测定方法(IEC 60404-15-2012+A1-2016);德文版本EN 60404-15-2012+A1-2017

This part of IEC 60404 specifies a solenoid method, a fluxmetric method, a magnetic moment method, a magnetic balance method and a permeability meter method for the determination of the relative magnetic permeability of feebly magnetic materials (including austenitic stainless steel). The methods given are for applied magnetic field strengths of between 5 kA/m and 100 kA/m.

Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials (IEC 60404-15:2012 + A1:2016); German version EN 60404-15:2012 + A1:2017

IEC 63093-7:2018 铁氧体磁芯. 表面不规则的尺寸和极限指南. 第7部分: EER芯

This part of IEC 63093 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EER-cores made of ferrite, the essential dimensions of coil formers to be used with them as well the effective parameter values to be used in calculations involving them, and gives guidelines on allowable limits of surface irregularities applicable to EER-cores. This document is a specification useful in the negotiations between ferrite core manufacturers and customers about surface irregularities. The use of "derived" standards which give more detailed specifications of component parts while still permitting compliance with this document is discussed in Annex A.

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores

DL/T 668-2017 测量用互感器检验装置

Measuring transformer inspection device

DIN EN 60205:2017 磁性零件有效参数计算(IEC 60205-2016);德文版本EN 60205-2017

This International Standard lays down uniform rules for the calculation of the effective parameters of closed circuits of ferromagnetic material.

Calculation of the effective parameters of magnetic piece parts (IEC 60205:2016); German version EN 60205:2017

SJ/T 2268-2018 旋磁多晶铁氧体材料系列

Gyromagnetic polycrystalline ferrite material series

IEC TR 63090:2017 铁氧体磁芯尺寸公差

This document gives guidelines on the dimensional tolerances of ferrite cores. This document is considered as general information useful in the dialogue between ferrite core suppliers and users.

Dimensional tolerances of ferrite cores

BS EN 60205:2017 磁性零件有效参数的计算

Calculation of the effective parameters of magnetic piece parts

BS EN 60404-1:2017 磁性材料.分类

Magnetic materials. Classification

DIN EN 60556:2017 应用于微波频率的旋磁材料.性能测试方法(IEC 60556-2006+A1-2016);德文版本EN 60556-2006+A1-2016

Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties (IEC 60556:2006 + A1:2016); German version EN 60556:2006 + A1:2016

ASTM A340-17 磁性测试相关符号和定义的标准术语

Standard Terminology of Symbols and Definitions Relating to Magnetic Testing

JIS C 2560-3:2016 铁氧体磁芯. 第3部分: 尺寸和表面不平度

Cores made of ferrite -- Part 3: Dimensions and surface irregularities