L65 系统设备接口 标准查询与下载
共找到 482 条与 系统设备接口 相关的标准，共 33 页
本标准规定了欧洲总线A设备需要遵循的电气和定时要求。电气要求包括： a.总线上有效和无效逻辑状态的电压范围； b.要求的端接网络特性； c.要求的总线发送器和接收器特性； d.要求的连到总线上的插件的特性。 所规定的这套电气特性假定信号线上发生跳变所用的特定的稳定时间。因此，还规定了一些特定的定时限制。这些限制保证了在相应的控制信号跳变之前，相关的信号线已经稳定到要求的状态。
Information processing-Processor system bus interface(Eurobus A)
- ICS
- 35.200
- CCS
- L65
- 发布
- 1993-03-16
- 实施
- 1993-12-01
本标准描述了用于以微处理机为基本系统的高性能底板总线。该并行总线在32位非复用地址和数据信号通路上支持单个数据和数据块传送周期。传输是由异步交换协议所控制。总线分配是按多处理器结构而设定的。该总线也支持内部模块中断，以便能很快地响应内部的和外部发生的各种事件。插件板和机箱的机械结构符合GB3047.1（IEC297-1）《面板和机柜的基本尺寸系列》。
821 Bus--Microprocessor system bus for 1 to 4 byte data
- ICS
- 35.160
- CCS
- L65
- 发布
- 1992-10-04
- 实施
- 1993-06-01
本标准规定了描述过程计算系统和技术过程之间接口的方法。 本标准具有五种格式： 格式1：通用的 格式2：数字输入 格式3：数字输出 格式4：模拟输入 格式5：模拟输出 每种格式都包含了一个参数表。本标准描述了这些参数，解释了这些格式的用途，给出了这些格式的优选编排。 本标准是供所有从事过程接口设计、生产、销售以及应用方面人员使用的规范。本标准包含了这些接口规范所需要的参数表，并含有对它们使用的解释，以便使这些参数对所有有关人员具有相同的含义。
Data processing--Description of interface between process computing system and technical process
- ICS
- 35.200
- CCS
- L65
- 发布
- 1989-12-29
- 实施
- 1990-07-01
本标准适用于使用插针和插座连接器（间接配合）类型的底板连接微处理机系统部件的接口。
Microprocessor system bus I, 8-bit and 16-bit data--Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
- ICS
- 35.160
- CCS
- L65
- 发布
- 1987-03-24
- 实施
- 1987-11-01
本标准适用于使用边缘连接器（直接配合）类型的底板连接微处理机系统各部件的接口。
Microprocessor system bus I, 8-bit and 16-bit data--Part 2: Mechanical and pin descriptions for the system bus configuration with edge connectors (direct)
- ICS
- 35.160
- CCS
- L65
- 发布
- 1987-03-24
- 实施
- 1987-11-01
本标准适用于互连的数据处理、数据存储和外围控制等设备紧偶合配置的接口系统部件。本接口系统具有允许各种系统部件相互作用所必须的信号，它允许存储器和I/O的数据传送、直接存储器存取、中断产生等。本标准对构成该系统总线的所有的要素及特性均提供详细的说明。
Microprocessor system bus I, 8-bit and 16-bit data--Part 1: Functional description with electrical and timing specifications
- ICS
- 35.160
- CCS
- L65
- 发布
- 1987-03-24
- 实施
- 1987-11-01
Data interface specification for the online video "Bright Kitchen and Bright Stove" system
- ICS
- 35.2
- CCS
- L65
- 发布
- 2023-04-25
- 实施
- 2023-07-25
Technical Specifications for Interconnection of Fire IoT Systems
- ICS
- 35.240.01
- CCS
- L65
- 发布
- 2022-04-03
- 实施
- 2022-05-03
Data Interface Technical Specifications for Departmental Joint Reward and Punishment System
- ICS
- 30.200
- CCS
- L65
- 发布
- 2021-08-13
- 实施
- 2021-09-13
Adoption of MIPI Alliance Specification for A‐PHY Interface (A‐PHY) Version 1.0
- ICS
- 67.200
- CCS
- L65
- 发布
- 2021-06-16
- 实施
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C Cable and Connector Specification
- ICS
- 33.120.20
- CCS
- L65
- 发布
- 2021-02-01
- 实施
本标准规定了广东省地理信息公共服务平台瓦片地图服务、动态地图服务、地理要素服务和地理编码服务的接口。 本标准适用于广东省地理信息公共服务平台瓦片地图服务、动态地图服务、地理要素服务和地理编码服务的发布和访问，可为二次开发提供参考。
Service interface specification of geographic information public service platform
- ICS
- 35.200
- CCS
- L65
- 发布
- 2019-12-03
- 实施
- 2020-03-03
Provides an interface specification for developers of FDT components to support function control and data access within a client server architecture.
Field device tool (FDT) interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15 (IEC 62453-315:2009/A1:2016); English version EN 62453-315:2009/A1:2017
- ICS
- 35.160;35.240.50
- CCS
- L65
- 发布
- 2018-05-01
- 实施
- 2018-05-01
This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables.
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification
- ICS
- 33.120.20;33.120.30;35.200
- CCS
- L65
- 发布
- 2018-05-01
- 实施
- 2018-05-29
This specification defines the architecture and methodology for unilateral Product Authentication. It is intended to be fully compatible with and extend existing PD and USB infrastructure. Information is provided to allow for Policy enforcement@ but individual Policy decisions are not specified. The Authentication of USB Type-C products that support Alternate Modes is allowed. However@ the methods to do so are outside the scope of this specification.
Universal serial bus interfaces for data and power - Part 1-4: Common components - USB Type-CTM Authentication Specification
- ICS
- 29.220.01;33.120.01;35.200
- CCS
- L65
- 发布
- 2018-04-01
- 实施
- 2018-04-13
Exchange interface specification for animal husbandry remote monitoring platform
- ICS
- 35.200
- CCS
- L65
- 发布
- 2018-02-02
- 实施
- 2018-03-02
Data interface specification for online approval system
- ICS
- 35.200
- CCS
- L65
- 发布
- 2017-12-29
- 实施
- 2018-03-01
Government service network integration docking specification
- ICS
- 35.200
- CCS
- L65
- 发布
- 2017-12-29
- 实施
- 2018-03-01
This part of IEC 62453 explains the common principles of the field device tool concept. These principles can be used in various industrial applications such as engineering systems, configuration programs and monitoring and diagnostic applications. This standard specifies the general objects, general object behavior and general object interactions that provide the base of FDT.
Field Device Tool (FDT) Interface Specification - Part 2: Concepts and detailed Description (IEC 62453-2:2016); English version EN 62453-2:2017
- ICS
- 35.160;35.240.50
- CCS
- L65
- 发布
- 2017-11-00
- 实施
- 2017-11-01
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification
- ICS
- 33.120.20;33.120.30;35.200
- CCS
- L65
- 发布
- 2017-09-01
- 实施
