L65 系统设备接口 标准查询与下载
共找到 482 条与 系统设备接口 相关的标准，共 33 页
Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition (IEC 61800-7-1:2015); English version EN 61800-7-1:2016
- ICS
- 29.160.30;29.200
- CCS
- L65
- 发布
- 2016-11
- 实施
Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies (IEC 61800-7-303:2015); English version EN 61800-7-303:2016
- ICS
- 29.160.30;29.200
- CCS
- L65
- 发布
- 2016-11
- 实施
Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies (IEC 61800-7-301:2015); English version EN 61800-7-301:2016
- ICS
- 29.160.30;29.200
- CCS
- L65
- 发布
- 2016-11
- 实施
Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies (IEC 61800-7-302:2015); English version EN 61800-7-302:2016
- ICS
- 29.160.30;29.200
- CCS
- L65
- 发布
- 2016-11
- 实施
Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification (IEC 61800-7-203:2015); English version EN 61800-7-203:2016
- ICS
- 29.160.30;29.200
- CCS
- L65
- 发布
- 2016-11
- 实施
Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification (IEC 61800-7-204:2015); English version EN 61800-7-204:2016
- ICS
- 29.160.30;29.200
- CCS
- L65
- 发布
- 2016-11
- 实施
Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification (IEC 61800-7-201:2015); English version EN 61800-7-201:2016
- ICS
- 29.160.30;29.200
- CCS
- L65
- 发布
- 2016-11
- 实施
Purpose This specification defines the USB Type-C? receptacles@ plug and cables. The USB Type-C Cable and Connector Specification is guided by the following principles: ? Enable new and exciting host and device form-factors where size@ industrial design and style are important parameters ? Work seamlessly with existing USB host and device silicon solutions ? Enhance ease of use for connecting USB devices with a focus on minimizing user confusion for plug and cable orientation The USB Type-C Cable and Connector Specification defines a new receptacle@ plug@ cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices@ and that interoperate with existing platforms and devices: ? USB Type-C receptacles@ including electro-mechanical definition and performance requirements ? USB Type-C plugs and cable assemblies@ including electro-mechanical definition and performance requirements ? USB Type-C to legacy cable assemblies and adapters ? USB Type-C-based device detection and interface configuration@ including support for legacy connections ? USB Power Delivery optimized for the USB Type-C connector T he USB Type-C Cable and Connector Specification defines a standardized mechanism that supports Alternate Modes@ such as repurposing the connector for docking-specific applications. Scope This specification is intended as a supplement to the existing USB 2.0@ USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles@ plugs and cables. Normative information is provided to allow interoperability of components designed to this specification. Informative information@ when provided@ may illustrate possible design implementations.
Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB Type-CTM cable and connector specification
- ICS
- 33.120.20;33.120.30;35.200
- CCS
- L65
- 发布
- 2016-08
- 实施
- 2018-05-29
Information technology disk array interface requirements
- ICS
- 35.200
- CCS
- L65
- 发布
- 2016-04-05
- 实施
- 2016-09-01
Universal Serial Bus interfaces for data and power. Universal Serial Bus Specification, Revision 2.0 (TA 14)
- ICS
- 29.220.01;33.120.01;35.200
- CCS
- L65
- 发布
- 2016-02-29
- 实施
- 2016-02-29
Universal Serial Bus interfaces for data and power. Universal Serial Bus Cables and Connectors Class Document Revision 2.0 (TA 14)
- ICS
- 29.220.01;33.120.01;35.200
- CCS
- L65
- 发布
- 2016-01-31
- 实施
- 2016-01-31
Information technology. Generic cabling systems for customer premises. Matrix modelling of channels and links
- ICS
- 35.200
- CCS
- L65
- 发布
- 2015-11-30
- 实施
- 2015-11-30
Information technology - Small Computer System Interface (SCSI) - Part 326: Reduced Block Commands (RBC)
- ICS
- 35.200
- CCS
- L65
- 发布
- 2015-09
- 实施
The Battery Charging Working Group is chartered with creating specifications that define limits as well as detection, control and reporting mechanisms to permit devices to draw current in excess of the USB 2.0 specification for charging and/or powering up from dedicated chargers, hosts, hubs and charging downstream ports. These mechanisms are backward compatible with USB 2.0 compliant hosts and peripherals. Background The USB ports on personal computers are convenient places for Portable Devices (PDs) to draw current for charging their batteries. This convenience has led to the creation of USB Chargers that simply expose a USB standard-A receptacle. This allows PDs to use the same USB cable to charge from either a PC or from a USB Charger. If a PD is attached to a USB host or hub, then the USB 2.0 specification requires that after connecting, a PD must draw less than: 2.5 mA average if the bus is suspended; 100 mA if bus is not suspended and not configured; 500 mA if bus is not suspended and configured for 500 mA If a PD is attached to a Charging Port, (i.e. CDP, DCP, ACA-Dock or ACA), then it is allowed to draw IDEV CHG without having to be configured or follow the rules of suspend. In order for a PD to determine how much current it is allowed to draw from an upstream USB port, there need to be mechanisms that allow the PD to distinguish between a Standard Downstream Port and a Charging Port. This specification defines just such mechanisms. Since PDs can be attached to USB chargers from various manufacturers, it is important that all provide an acceptable user experience. This specification defines the requirements for a compliant USB charger, which is referred to in this spec as a USB Charger. If a PD has a Dead or Weak Battery, then the Connect Timing Engineering Change Notice (ECN) issued by the USB-IF on the USB 2.0 spec allows that device to draw up to IUNIT while attached but not connected.
Universal serial bus interfaces for data and power - Part 1-1: Common components - USB Battery Charging Specification, Revision 1.2
- ICS
- 35.200
- CCS
- L65
- 发布
- 2015-09
- 实施
- 2015-09-15
OPC unified architecture. Services
- ICS
- 25.040.40;25.100.01
- CCS
- L65
- 发布
- 2015-06-30
- 实施
- 2015-06-30
OPC unified architecture. Mappings
- ICS
- 25.040.40;25.100.01
- CCS
- L65
- 发布
- 2015-06-30
- 实施
- 2015-06-30
OPC unified architecture. Information Model
- ICS
- 25.040.40;25.100.01
- CCS
- L65
- 发布
- 2015-06-30
- 实施
- 2015-06-30
OPC unified architecture. Data Access
- ICS
- 25.040.40;25.100.01
- CCS
- L65
- 发布
- 2015-05-31
- 实施
- 2015-05-31
OPC unified architecture. Profiles
- ICS
- 25.040.40;25.100.01
- CCS
- L65
- 发布
- 2015-05-31
- 实施
- 2015-05-31
本标准规定了符合SJ/T 11310-2005和SJ/T 11310.2-2015的形态的设备类型标识符要求,功能性设备类型标识符要求及其接口要求。本标准适用于参与IGRS服务的各种设备。
Information device intelligent grouping and resource sharing.Part 5: Device type
- ICS
- 35.200
- CCS
- L65
- 发布
- 2015-04-30
- 实施
- 2015-10-01
