L86 通用电子测量仪器设备及系统 标准查询与下载

CISPR 16-1-4-2008 无线电干扰与抗干扰测量仪器和方法的规范.第1-4部分:无线电干扰与抗干扰测量仪器-辅助设备-辐射干扰

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications for ancillary apparatus are included for: antennas and test sites, TEM cells, and reverberating chambers. The requirements of this publication must be complied with at all frequencies and for all levels of radiated disturbances within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2-3, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary euipment - Radiated disturbances

GOST R 51318.16.1.4-2008 技术设备的电磁兼容性.无线电干扰和抗干扰测量设备及方法规范.第1-4部分:无线电干扰和抗干扰测量设备.无线电干扰辐射测量和抗干扰测试设备

Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-4. Radio disturbance and immunity measuring apparatus. Radiated radio disturbance measuring and immunity test ap

ANSI/ATIS 0300255-2008 在使用中的非侵入测量装置(INMD).适用于非侵入测量装置测量的用户意见模式方法学

This document will allow INMD measurements to be used to evaluate the performance of telecommunications connections and services and to detect speech level, noise, and echo anomalies on telecommunications connections.

In Service, Nonintrustive, Measurement Device (INMD) - Methodology for Applying INMD Measurements to Customer Opinion Models

DIN EN 55016-1-1:2007 无线电干扰和抗扰测量仪器及方法的规范.第1-1部分:无线电干扰和抗扰测量仪器.测量仪器

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus (IEC/CISPR 16-1-1:2006 + A1:2006); German version EN 55016-1-1:2007 + A1:2007

BS EN 55016-1-4:2007 无线电干扰和抗扰测量仪器和方法的规范.无线电干扰和抗扰测量仪器.辅助设备.辐射干扰

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications for ancillary apparatus are included for: antennas and test sites, TEM cells, and reverberating chambers. The requirements of this publication shall be complied with at all frequencies and for all levels of radiated disturbances within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2-3, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-4: Radio disturbance and immunity measuring apparatus — Ancillary equipment — Radiated disturbances

DIN EN 55016-1-2:2007 无线电干扰和抗扰测量仪器和方法规范.第1-2部分:无线电干扰和抗扰测量仪器.辅助设备.传导干扰(IEC/CISPR 16-1-2-2003 + A1-2004 + A2-2006)

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances (IEC/CISPR 16-1-2:2003 + A1:2004 + A2:2006); German version EN 5

DIN EN 55016-2-3:2007 无线电干扰和抗扰测量仪器和方法规范.第2-3部分:干扰和抗扰测量方法.辐射干扰测量(IEC/CISPR 16-2-3-2006)

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (IEC/CISPR 16-2-3:2006); German version EN 55016-2-3:2006

CISPR 16-4-4/TR-2007 无线电干扰与抗干扰测量仪器和方法的规范.第4-4部分:不确定性,统计和限值模型-投诉统计和无线电服务保护的限值计算模型

This part of CISPR 16 contains a recommendation on how to deal with statistics of radio interference complaints. Furthermore it describes the calculation of limits for disturbance field strength and voltage for the measurement on a test site based on models for the distribution of disturbances by radiated and conducted coupling, respectively.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - statistics of complaints and a model for the calculation of limits for the protection of radio services

JJF 1177-2007 CDMA 数字移动通信综合测试仪 校准规范

本规范规定了CDMA（IS-95，CDMA 2000）数字移动通信综合测试仪（以下简称CDMA综测仪）的校准项目、条件及结果处理、适用于CDMA综测仪的校准。

Calibration Specification of CDMA Digital Radio Communication Testers

AIR FORCE A-A-59707 VALID NOTICE 1-2007 探测器/监视器,肼

A-A-59707, dated 10 December 2001, has been reviewed and determined to be valid for use in acquisition.

DETECTOR/MONITOR, HYDRAZINE

BS EN 55016-1-1:2007+A2:2008 无线电干扰和抗扰测量仪和方法用规范.无线电干扰和抗扰测量仪.测量仪

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in the frequency range 9 kHz to 18 GHz. In addition, requirements are specified for specialized equipment for discontinuous disturbance measurements. The requirements include the measurement of broadband and narrowband types of radio disturbance. The receiver types covered include the following: a) the quasi-peak measuring receiver, b) the peak measuring receiver, c) the average measuring receiver, #d) the rms-averge measuring receiver.$ The requirements of this publication shall be complied with at all frequencies and for all levels of radio disturbance voltages, currents, power or field strengths within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus — Measuring apparatus

BS EN 55016-1-1:2007 无线电干扰和抗扰测量仪器的规范和方法.无线电干扰和抗扰测量仪器.测量仪器

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in the frequency range 9 kHz to 18 GHz. In addition, requirements are specified for specialized equipment for discontinuous disturbance measurements. The requirements include the measurement of broadband and narrowband types of radio disturbance. The receiver types covered include the following: a) the quasi-peak measuring receiver, b) the peak measuring receiver, c) the average measuring receiver, d) the r.m.s. measuring receiver. The requirements of this publication shall be complied with at all frequencies and for all levels of radio disturbance voltages, currents, power or field strengths within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-1: Radio disturbance and immunity measuring apparatus — Measuring apparatus

DIN EN 55016-1-3:2007 无线电干扰与抗干扰测量仪器和方法的规范.第1-3部分:无线电干扰与抗干扰测量仪器.辅助设备.干扰功率(IEC/CISPR 16-1-3-2004+技术勘误1-2006)

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power (IEC/CISPR 16-1-3:2004 + Corrigendum 1:February 2006); German version

SANS 216-1-2:2007 无线电干扰和抗扰性测量仪器及方法规范．第1．2部分：无线电干扰和抗扰性测量仪器．辅助设备．传到骚扰

Specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages and currents in the frequency range 9 kHz to 1 GHz. Specifications for ancillary apparatus are included for artificial mains networks, current an

Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

SANS 216-4-3:2007 无线电干扰和抗扰性测量仪器及方法规范．第4．3部分：误差、统计数据和限值建模．确定量产产品的EMC符合性的统计考察

Deals with statistical considerations in the determination of EMC compliance of mass-produced products.

Specification for radio disturbance and immunity measuring apparatus and methods Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

GJB 5936-2007 军用电子装备自动测试设备接口

本标准规定了军用电子装备自动测试设备的软件、硬件接口要求。 本标准适用于军用电子装备自动测试设备的软件和硬件研制以及测试程序集开发。

Interface of automatic test equipment for military electronic materiel

GJB 5937-2007 军用电子装备自动测试系统通用要求

本标准规定了军用电子装备自动测试系统（以下简称自动测试系统）的系统组成、体系结构、系统性能、包装、运输、储存等要求。 本标准适用于军用电子装备自动测试系统的设计、制造、检验和订购。

General requirement of automatic test system for military electronic equipment

GJB 5958-2007 战场通信频率管理系统干扰频谱监测仪通用规范

本规范规定了战场通信频率管理系统干扰频谱监测仪（以下简称干扰频谱监测仪）的要求、质量保证规定、交货准备和说明事项等内容。 本规范适用于干扰频谱监测仪的设计、制造、检验和验收。

General specifIcation for the interrupting frequency monitor of battleneld communication frequency management system

JJF 1167-2007 杂音计校准规范

本规范适用于杂音计（也称杂音电压表、杂音测试器）的校准。

Calibration Specification for Psophometers

JJF 1165-2007 信纳表校准规范

本规范适用于音频调制信号频率为1kHz、信纳测量范围为0dB～20dB的信纳表的校准。

Calibration Specification for SINAD Meters