L86 通用电子测量仪器设备及系统 标准查询与下载

BS EN 55016-1-4:2004 无线电干扰和抗扰测量仪器和方法规范.无线电干扰和抗扰测量仪器.辅助设备.辐射干扰

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications for ancillary apparatus are included for: antennas and test sites, TEM cells, and reverberating chambers. The requirements of this publication shall be complied with at all frequencies and for all levels of radiated disturbances within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2-3, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances

BS EN 55016-1-2:2004 无线电干扰和抗扰测量仪和方法用规范.无线电干扰和抗扰测量仪.辅助设备.传导干扰

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages and currents in the frequency range 9 kHz to 1 GHz. Specifications for ancillary apparatus are included for: artificial mains networks, current and voltage probes and coupling units for current injection on cables. The requirements of this publication shall be complied with at all frequencies and for all levels of radio disturbance voltages and currents within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2, and further information on radio disturbance is given in Part 3 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

BS EN 55016-1-1:2004 无线电干扰和抗扰测量仪器和方法规范.无线电干扰和抗扰测量仪器.测量仪器

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in the frequency range 9 kHz to 18 GHz. In addition, requirements are specified for specialized equipment for discontinuous disturbance measurements. The requirements include the measurement of broadband and narrowband types of radio disturbance. The receiver types covered include the following: a) the quasi-peak measuring receiver, b) the peak measuring receiver, c) the average measuring receiver, d) the r.m.s. measuring receiver. In addition there are specifications for spectrum analyzers, scanning receivers and audio-frequency voltmeters. The requirements of this publication shall be complied with at all frequencies and for all levels of radio disturbance voltages, currents, power or field strengths within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

BS EN 55016-4-2:2004 无线电干扰和抗扰测量仪器和方法用规范.第4-2部分:不确定度、统计和限值模型.EMC测量的不确定度

This part of CISPR 16 is designated a basic standard, which specifies the manner in which measurement uncertainty is to be taken in to account in determining compliance with CISPR limits. The material is also relevant to any EMC test when interpretation of the results and conclusions reached will be impacted by the uncertainty of the instrumentation used during the testing. Annex A contains the background material used in providing the amount of measurement uncertainty found in generating the CISPR values shown in Clause 4 and hence provides valuable background material for those needing both initial and further information on measurement uncertainty and how to take into account individual uncertainties in the measurement chain. The annex however is not intended to be a tutorial of user manual or to be copied when making uncertainty calculations. For that, the references shown in the bibliography should be used. Measurement instrumentation specifications are given in CISPR 16-1, while the methods of measurement are covered in CISPR 16-2. Further information and background on CISPR and radio disturbances is given in CISPR 16-3. The other parts of CISPR 16-4 contain further information on uncertainties in general, statistics and limit modelling.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurements

BS EN 55016-1-3:2004 无线电干扰和抗扰测量仪器和方法规范.无线电干扰和抗扰测量仪器.辅助设备.干扰功率

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and calibration of the absorbing clamp for the measurement of radio disturbance power in the frequency range 30 MHz to 1 GHz.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

SANS 216-1-5:2004 无线电干扰和抗扰性测量仪器及方法规范．第1．5部分：无线电干扰和抗扰性测量仪器．30MHz到1000MHz天线校准试验场

Specifies the requirements for calibration test sites, used to perform antenna calibrations, as well as the test antenna characteristics, calibration site verification procedure and site compliance criteria. Further information on calibration site requir

Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHz

SANS 216-2-4:2004 无线电干扰和抗扰性测量仪器及方法规范．第2．4部分：骚扰功率和抗扰性的测量方法．抗扰性测量

Specifies the methods of measurement of immunity to EMC phenomena in the frequency range 9 kHz to 18 GHz.

Specification for radio disturbance and immunity measuring apparatus and methods Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements

JEDEC JESD22-B105C-2003 铅完整性

The following details, and those required by the specific test condition, shall be specified in the applicable procurement document

Lead Integrity

BS EN 61000-4-7:2002+A1:2009 电磁兼容性(EMC).测试和测量技术.供电系统及所连设备谐波和间谐波的测量和仪器仪表的通用指南

This part of IEC 61000 is applicable to instrumentation intended for measuring spectral components in the frequency range up to 9 kHz which are superimposed on the fundamental of the power supply systems at 50 Hz and 60 Hz. For practical considerations, this standard distinguishes between harmonics, interharmonics and other components above the harmonic frequency range, up to 9 kHz. This standard defines the measurement instrumentation intended for testing individual items of equipment in accordance with emission limits given in certain standards (for example, harmonic current limits as given in IEC 61000-3-2) as well as for the measurement of harmonic currents and voltages in actual supply systems. Instrumentation for measurements above the harmonic frequency range, up to 9 kHz is tentatively defined (see Annex B).

Electromagnetic compatibility (EMC) - Part 4-7:Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

BS EN 61000-4-7:2002 电磁兼容性(EMC).第4-7部分:测试和测量技术.供电系统及所连设备谐波和谐波间的测量和仪器仪表的通用指南

This part of IEC 61000 is applicable to instrumentation intended for measuring spectral components in the frequency range up to 9 kHz which are superimposed on the fundamental of the power supply systems at 50 Hz and 60 Hz. For practical considerations, this standard distinguishes between harmonics, interharmonics and other components above the harmonic frequency range, up to 9 kHz. This standard defines the measurement instrumentation intended for testing individual items of equipment in accordance with emission limits given in certain standards (for example, harmonic current limits as given in IEC 61000-3-2) as well as for the measurement of harmonic currents and voltages in actual supply systems. Instrumentation for measurements above the harmonic frequency range, up to 9 kHz is tentatively defined (see Annex B). NOTE 1 This document deals in detail with instruments based on the discrete Fourier transform. NOTE 2 The description of the functions and structure of the measuring instruments in this standard is very explicit and meant to be taken literally. This Is due to the necessity of having reference instruments with reproducible results irrespective of the characteristics of the input signals. NOTE 3 The instrument is defined to accommodate measurements of harmonics up to the 50th order.

Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

JEDEC JESD22-B108A-2003 表面装贴半导体仪器的共面性测试

The purpose of this test is to measure the deviation of the terminals (leads or solder balls) from coplanarity for surface-mount semiconductor devices.

Coplanarity Test for Surface-Mount Semiconductor Devices

DLA SMD-5962-89878 REV B-2003 硅单片,四重电源故障监视器,线性微型电路

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.

MICROCIRCUIT, LINEAR, QUAD, POWER FAULT MONITOR, MONOLITHIC SILICON

SJ 20824-2002 军用LCR自动测量仪通用规范

General specification for military LCR automatic measuring instrument

CSA CEI-CISPR 22-CAN/CSA-2002(R2006) 信息技术设备.无线电干扰.极限值和测量方法

Procedures are given for the measurement of the levels of spurious signals generated by the ITE and limits are specified for the frequency range 9 kHz to 400 GHz for both class A and class B equipment. No measurements need be performed at frequencies where no limits are specified. The intention of this publication is to establish uniform requirements for the radio disturbance level of the equipment contained in the scope, to fix limits of disturbance, to describe methods of measurement and to standardize operating conditions and interpretation of results.

Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement

CSA IEC-CISPR 22-02-CAN/CSA-2002(R2006) 信息技术设备.无线电干扰特性.极限值和测量方法

This publication applies to ITE as defined in 3.1. Procedures are given for the measurement of the levels of spurious signals generated by the ITE and limits are specified for the frequency range 9 kHz to 400 GHz for both class A and class B equipment. No measurements need be performed at frequencies where no limits are specified. The intention of this publication is to establish uniform requirements for the radio disturbance level of the equipment contained in the scope, to fix limits of disturbance, to describe methods of measurement and to standardize operating conditions and interpretation of results.

Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement

AIR FORCE A-A-59112 A-2002 100赫兹至1.8千兆赫频谱分析仪

This CID describes a solid state, internal preselection, programmable, 10 Hz resolution bandwidth, 100 Hz to 1.8 GHz spectrum analyzer with internal tracking generator. This CID is intended as a minimum requirement for the spectrum analyzer in which o

SPECTRUM ANALYZER 100 HZ TO 1.8 GHZ

SJ 20801-2001 瞬时测频接收机模块通用规范

General specification for instantaneous frequency measurement receiver

AIA/NAS NASM28728/3-2001 FSC 5355型同中心(内径1.810)多圈旋转计数器控制器

Dial, Control, Multiturn Counters, 10 - Turn Counter, Concentric (1.810 - Inch Diameter) FSC 5355

Dial, Control, Multiturn Counters, 10 - Turn Counter, Concentric (1.810 - Inch Diameter)

AIA/NAS NASM28728-2001 FSC 5355型多圈转盘计数器控制器

NAM13 12-105, “Fastener Test Methods Method 105 Stress Durability” was adopted on 29 August 1997 for use by the Department of Defense @OD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center Aircraft Division, Code 4141OOB120-3 Highway 547, Lakehurst, NJ 08733-5100. DoD activities may obtain copies of this standard fi-om the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11-5094. The private sector and other Government agencies may purchase copies fi-om the Aerospace Industries Association, 1250 Eye Street NW, Washington, DC 20005.

Dial, Control, Multi-Turn Counters General Specifcation for

AIA/NAS NASM28728/5-2001 FSC 5355型三位数多圈转盘计数器控制器

Dial, Control, Multiturn Counters, Three Digits FSC 5355

Dial, Control, Multiturn Counters, Three Digits