N13 机械量仪表、自动秤重装置与其他检测仪表 标准查询与下载

JJF 1427-2013 微机电（MEMS）线加速度计校准规范

本规范规定了微机电(MEMS)线加速度计(以下简称MEMS线加速度计或加速度计)的校准项目和校准方法,适用于单敏感轴MEMS线加速度计。

Calibration Specification for MEMS Linear Accelerometers

JJF 1426-2013 双离心机法线加速度计动态特性校准规范

本规范适用于利用双离心机对线加速度计的动态特性进行校准。

Calibration Specification for Dynamic Parameters of Linear Accelerometer Used Double Centrifuge

ISO 14253-1:2013 产品几何量技术规范(GPS).工件的测量检验和测量设备.第1部分:按规范检验一致性或不一致性的判定规则

This part of ISO 14253 establishes the rules for determining the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or limits of maximum permissible errors for a metrological characteristic of a measuring equipment, taking into account the measurement uncertainty.

Geometrical product specifications (GPS).Inspection by measurement of workpieces and measuring equipment.Part 1: Decision rules for proving conformity or nonconformity with specifications

SN/T 0188.7-2013 进出口商品衡器鉴重规程 第7部分:电子料斗秤鉴重

SN/T 0188的本部分规定了进出口商品筒仓电子料斗秤计重的程序、要求和方法。本部分适用于进出口散装商品的筒仓电子料斗秤鉴重。

Rules for the weight survey by weighing instrument on import and export commodities.Part 7:Weight survey by stock weigher

JJG(测绘) 2101-2013 数字水准仪

本规程适用于DSZ05和DSZ1级数字水准仪的首次检定、后续检定和使用中检查。与数字水准仪配套使用的因瓦条码水准标尺的检定,应按JJG(测绘)2102执行。

Digital Levels

JJG(测绘) 5201-2013 陀螺经纬仪

本规程适用于采用逆转点法测量的陀螺经纬仪中陀螺仪部分的首次检定、后续检定和使用中检查,其他类型陀螺经纬仪可以参照执行。陀螺经纬仪若由陀螺装置与光学经纬仪组成,光学经纬仪部分的技术要求及检定方法按JJG 414的规定执行;陀螺经纬仪若由陀螺装置与全站仪(或电子经纬仪)组成,全站仪(或电子经纬仪)部分的技术要求及检定方法按JJG 100的规定执行。

Gyrotheodolites

JJG(测绘) 2102-2013 因瓦条码水准标尺

本规程适用于因瓦条码水准标尺的首次检定、后续检定和使用中检查。与因瓦条码水准标尺配套使用的数字水准仪的检定,应按JJG(测绘)2101执行。

Invar Bar-Coded Levelling Staffs

ISO 25178-604:2013 产品几何技术规范(GPS) 表面纹理 平面 第604部分 非接触式标称特征(连贯性扫描干涉法)仪器

This part of ISO 25178 specifies the metrological characteristics of coherence scanning interferometry (CSI) systems for 3D mapping of surface height.

Geometrical product specifications (GPS).Surface texture: Areal.Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments

ISO 14253-2:2011/cor 1:2013 产品几何技术规范(GPS).工件和测量设备的测量检查.第2部分:几何产品规范测量中、测量设备校准中以及产品检验中不确定度评价导则

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technica

JJF 1422-2013 坐标测量球校准规范

本规范适用于坐标测量球(检测球和标定球)的校准。

Calibration Specification for Coordinate Measuring Spheres

JJF 1410-2013 丝杠动态行程测量仪校准规范

本规范适用于丝杠动态行程测量仪的校准。

Calibration Specification for Dynamical Screw Travel Testers

JJF 1408-2013 关节臂式坐标测量机校准规范

本规范适用于关节臂式坐标测量机的校准。

Calibration Specification for Articulated Arm Coordinate Measuring Machines

JJG 797-2013 扭矩扳子检定仪

本规程适用于电子式、机械式和液压式扭矩扳子检定仪(以下简称扭矩仪)的首次检定、后续检定和使用中检查。

Calibration Instrument for Torque Wrenches

JIS B 0192:2013 称重仪术语表

Glossary of terms used in weighing instrument

DIN EN ISO 25178-71:2013 产品的几何技术规范(GPS).表面纹理:平面.第71部分:软件测量标准(ISO 25178-71-2012).德文版本EN ISO 25178-71-2012

Geometrical product specification (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2012); German version EN ISO 25178-71:2012

JIS B 1757-3:2013 单个齿轮测量仪器的评价.第3部分:利用平面人工产品进行螺旋形测量

Evaluation of instruments for the measurement of individual gears.Part 3: Helix measurement using plane artifacts

JIS B 1757-4:2013 单个齿轮测量仪器的评价.第4部分:利用球形人工产品进行螺距测量

Evaluation of instruments for the measurement of individual gears.Part 4: Pitch measurement using sphere artifacts

ANSI/ASME MFC-5.3-2013 使用多普勒超声波流量计对封闭管道中流量的测量

Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters

ASTM E617-13 实验室砝码和精密质量标准用标准规范

1.1 This specification covers weights and mass standards used in laboratories, specifically classes 000, 00, 0, 1, 2, 3, 4, 5, 6 and 7. This specification replaces National Bureau of Standards Circular 547, Section 1, which is out of print. 1.2 This specification contains the principal physical characteristics and metrological requirements for weights that are used. 1.2.1 For the verification of weighing instruments; 1.2.2 For the calibration of weights of a lower class of accuracy; and 1.2.3 With weighing instruments. 1.3 Maximum Permissible Errors (formerly tolerances) and design restrictions for each class are described in order that both individual weights or sets of weights can be chosen for appropriate applications. 1.4 The values stated in SI units are to be regarded as standard. 1.5 Weight manufacturers must be able to provide evidence that all new weights comply with specifications in this standard (e.g., material, density, magnetism, surface finish, mass values, uncertainties). Statements of compliance by calibration laboratories during subsequent calibrations must meet the requirements of ISO/IEC 17025, 5.10.4.2 and indicate on the calibration report which sections have or have not been assessed.

Standard Specification for Laboratory Weights and Precision Mass Standards

BS EN ISO 25178-71:2012 产品几何技术规范(GPS) 表面纹理 平面 软件测量标准

Geometrical product specifications (GPS). Surface texture: Areal. Software measurement standards