N13 机械量仪表、自动秤重装置与其他检测仪表 标准查询与下载
共找到 1086 条与 机械量仪表、自动秤重装置与其他检测仪表 相关的标准，共 73 页
이 표준은 KS B ISO 20474 시리즈의 다른 표준들에 주어진 토공기계의 안전에 관한
Earth-moving machinery-Safety-Part 14:Information on national and regional provisions
- ICS
- 53.1
- CCS
- N13
- 发布
- 2012-12-21
- 实施
- 2012-12-21
本规程适用于摩托车轮偏检测仪（以下简称轮偏仪）的首次检定、后续检定和使用中检查。
Motorcycle Wheel Deviation Testers
- ICS
- CCS
- N13
- 发布
- 2012-12-21
- 实施
- 2013-06-21
本规程适用于轨道衡检衡车（以下简称检衡车）的首次检定、后续检定和使用中检查。
Test Vehicle for Rail-weighbridges
- ICS
- CCS
- N13
- 发布
- 2012-12-12
- 实施
- 2013-06-12
本规程适用于旋转纯弯曲疲劳试验机(以下简称为试验机)的首次检定、后续检定和使用中检查。旋转纯弯曲疲劳试验机主要包括四点受力式旋转纯弯曲疲劳试验机、悬臂式旋转纯弯曲疲劳试验机以及高温旋转纯弯曲疲劳试验机。 其他类型的旋转弯曲疲劳试验机可参照本规程进行检定。
Rotating Pure Bending Fatigue Testing Machines
- ICS
- CCS
- N13
- 发布
- 2012-12-03
- 实施
- 2013-06-03
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards
- ICS
- 17.040.20;17.040.30
- CCS
- N13
- 发布
- 2012-12
- 实施
This International Standard specifies the most important design and metrological characteristics of electronic digital-indicator gauges.
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012); German version EN ISO 13102:2012
- ICS
- 17.040.30
- CCS
- N13
- 发布
- 2012-12
- 实施
이 표준에서는 토공기계와 관련되는 한국어, 영어, 프랑스어, 러시아어에 대한 공통 용어를
Earth-moving machinery-Multilingual listing of equivalent terms-Part 1:General
- ICS
- 01.040.53;53.100
- CCS
- N13
- 发布
- 2012-11-23
- 实施
- 2012-11-23
이 표준에서는 토공기계와 관련되는 한국어, 영어, 프랑스어, 러시아어에 대한 공통 용어를
Earth-moving machinery－Multilingual listing of equivalent terms－Part 2：Performance and dimensions
- ICS
- 53.100;01.040.53
- CCS
- N13
- 发布
- 2012-11-23
- 实施
- 2012-11-23
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
- ICS
- 17.040.30
- CCS
- N13
- 发布
- 2012-11
- 实施
本规范规定了数字指示秤法制相关软件的代码保护、软件接口保护、软件标识、算法和功能正确性、防止欺骗性使用以及可信度级别等软件可信度的通用要求、测评方法、测评结果及其表述等内容。 本规范适用于数字指示秤法制相关软件可信度的测评。
Testing Method for Software Credibility of Digital Indicating Weighing Instruments
- ICS
- CCS
- N13
- 发布
- 2012-10-08
- 实施
- 2013-01-08
Geometrical product specifications (GPS) - dimensional measuring equipment : electronic digital-indicator gauge - Design and metrological characteristics.
- ICS
- 17.040.30
- CCS
- N13
- 发布
- 2012-10-01
- 实施
- 2012-10-05
本型式评价大纲适用于符合JJG 234《自动轨道衡》和GB/T 11885《自动轨道衡》要求的标准轨距的自动轨道衡（以下简称轨道衡）型式评价，其他非标准轨距轨道衡可参照采用。
The Program of Pattern Evaluation for Automatic Rail-weighbridges (Motion Weighing Railway Track Scale)
- ICS
- CCS
- N13
- 发布
- 2012-09-03
- 实施
- 2012-12-03
本大纲适用于国家依法管理的中准确度等级和普通准确度等级的非自动秤(模拟指示秤)(以下简称“模拟指示秤”)的型式评价。本大纲不适用于非固定式悬挂的模拟指示秤。
Program of Pattern Evaluation for Non-automatic Weighing Instruments (Analogue Indicating Weighing Instruments)
- ICS
- CCS
- N13
- 发布
- 2012-09-03
- 实施
- 2013-03-03
Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
- ICS
- 17.060;87.040
- CCS
- N13
- 发布
- 2012-09
- 实施
DIN EN ISO 13225:2012 产品几何技术规范(GPS).带径向收缩式套筒的机械千分表.高度计.计量特性和设计(ISO 13225-2012).德文版本EN ISO 13225-2012
Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012); German version EN ISO 13225:2012
- ICS
- 17.040.30
- CCS
- N13
- 发布
- 2012-08
- 实施
This part of ISO 25178 specifies the complete specification operator for surface texture (scale limited surfaces) by areal methods.
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators
- ICS
- 17.040.20;17.040.30
- CCS
- N13
- 发布
- 2012-07
- 实施
Refrigerated light hydrocarbon fluids - Measurement of cargoes on board LNG carriers
- ICS
- 75.180.30
- CCS
- N13
- 发布
- 2012-07
- 实施
Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
- ICS
- 17.040.30
- CCS
- N13
- 发布
- 2012-06-30
- 实施
- 2012-06-30
Geometrical product specifications (GPS). Surface texture. Areal. Terms, definitions and surface texture parameters
- ICS
- 17.040.30
- CCS
- N13
- 发布
- 2012-04-30
- 实施
- 2012-04-30
Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
- ICS
- 17.040.20;17.040.30
- CCS
- N13
- 发布
- 2012-04
- 实施
