N31 望远镜、大地测量与航测仪器 标准查询与下载

ARMY MIL-T-48554 A (2)-2006 M137.M137A1.M137A2 和M137A3型全景望远镜

This specification covers four types of panoramic telescopes which provide four-power magnification and a ten-degree field of view. They are equipped with numerical counters which indicate azimuth settings and corrections.

TELESCOPE, PANORAMIC: M137, M137A1, M137A2 AND M137A3

BS ISO 14490-7:2005 光学和光学仪器.望远镜系统测试方法.分辨率限值的测试方法

This part of ISO 14490 specifies the test methods for the determination of the limit of resolution of telescopic systems and observational telescopic instruments.

Optics and optical instruments - Test methods for telescopic systems - Test methods for limit of resolution

BS ISO 14490-6:2005 光学和光学仪器.望远镜系统测试方法.纱幕眩光指数的测试方法

This part of ISO 14490 specifies the test methods for the determination of the veiling glare index of telescopic systems and observational telescopic instruments.

Optics and optical instruments - Test methods for telescopic systems - Test methods for veiling glare index

ISO 14490-2:2005 光学和光学仪器.望远镜系统的试验方法.第2部分:双目镜系统的试验方法

This part of ISO 14490 is applicable to binocular telescopic systems and specifies the test methods for determination of the following characteristics: — non-parallelism of the axes of bundles of rays emergent from the eyepieces; — interpupillary distance; — relative difference in magnification; — focusing difference between telescopes of binocular systems.

Optics and optical instruments - Test methods for telescopic systems - Part 2: Test methods for binocular systems

ISO 14490-4:2005 光学和光学仪器.望远镜系统的试验方法.第4部分:天文望远镜的试验方法

This part of ISO 14490 is applicable to amateur astronomical telescopes. For general optical test methods of telescopic systems see ISO 14490-1.

Optics and optical instruments - Test methods for telescopic systems - Part 4: Test methods for astronomical telescopes

ISO 14490-6:2005 光学和光学仪器.望远镜系统的试验方法.第6部分:纱幕眩光指数的试验方法

This part of ISO 14490 specifies the test methods for the determination of the veiling glare index of telescopic systems and observational telescopic instruments.

Optics and optical instruments - Test methods for telescopic systems - Part 6: Test methods for veiling glare index

ISO 14490-1:2005 光学和光学仪器.望远镜系统的试验方法.第1部分:基本特征的试验方法

This part of ISO 14490 specifies the test methods for the determination of the following basic characteristics of telescopic systems and observational telescopic instruments: — angular magnification (see Clause 4); — entrance pupil diameter (see Clause 5); — exit pupil diameter and eye relief (see Clause 6); — angular field of view in the object space (see Clause 7); — angular field of view in the image space (see Clause 8); — angular field of view in the object space for spectacle wearers (see Clause 9); — collimation of the bundle of rays emergent from the eyepiece (see Clause 10); — image rotation (see Clause 11); — closest distance of observation (see Clause 12).

Optics and optical instruments - Test methods for telescopic systems - Part 1: Test methods for basic characteristics

ISO 14490-5:2005 光学和光学仪器.望远镜系统的试验方法.第5部分:透射率的试验方法

This part of ISO 14490 specifies the test methods for the determination of the transmittance of telescopic systems and observational telescopic instruments.

Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance

ISO 14490-7:2005 光学和光学仪器.望远镜系统的试验方法.第7部分:极限分辨率的试验方法

This part of ISO 14490 specifies the test methods for the determination of the limit of resolution of telescopic systems and observational telescopic instruments.

Optics and optical instruments - Test methods for telescopic systems - Part 7: Test methods for limit of resolution

DIN ISO 14135-2:2005 光学和光学仪器.望远镜瞄准具规范.第2部分:高性能仪器

Specification of requirements for high performance telescopic sights.

Optics and optical instruments - Specifications for telescopic sights - Part 2: High-performance instruments (ISO 14135-2:2003)

DIN ISO 14135-1:2005 光学和光学仪器.望远镜瞄准具规范.第1部分:通用仪器

Optics and optical instruments - Specifications for telescopic sights - Part 1: General-purpose instruments (ISO 14135-1:2003)

ISO 17123-5:2005 光学和光学仪器.大地测量和测绘仪器的现场试验规程.第5部分:电子视距仪

This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of electronic tacheometers (total stations) and their ancillary equipment when used in building and surveying measurements. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature. This part of ISO 17123 can be thought of as one of the first steps in the process of evaluating the uncertainty of measurements (more specifically of measurands). The uncertainty of a result of a measurement is dependent on a number of factors. These include among others: repeatability, reproducibility (between-day repeatability) and a thorough assessment of all possible error sources, as prescribed by the ISO Guide to the expression of uncertainty in measurement (GUM). These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposely designed to minimize atmospheric influences.

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Electronic tacheometers

JIS B 7155:2005 光学和光学仪器.望远装置.天文望远镜的规范

この規格は，ファインダ望遠鏡を含むアマチュア向けの天体望遠鏡(以下，天体望遠鏡という。)の特性及び機能について規定する。ただし，専門家用及び玩具の望遠鏡は除く。

Optics and optical instruments -- Telescopic systems -- Specifications for astronomical telescopes

JIS B 7156:2005 望远镜式瞄准具

この規格は，射撃を目的とすろ空気銃，拳銃及びライフル銃に取り付けて使用するライフルスコープ(以下，ライフルスコープという。)の特性について規定する。

Telescopic sights

ISO 17123-7:2005 光学和光学仪器.大地测量和测绘仪器的现场试验规程.第7部分:光学测深仪器

This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of optical plumbing instruments and their ancillary equipment, when used in building and surveying measurements. This part of ISO 17123 is not applicable to optical plummets as a device in tribrachs or in surveying instruments. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature. This part of ISO 17123 can be thought of as one of the first steps in the process of evaluating the uncertainty of a measurement (more specifically a measurand). The uncertainty of a result of a measurement is dependent on a number of factors. These include among others: repeatability, reproducibility (between-day repeatability) and a thorough assessment of all possible error sources, as prescribed by the ISO Guide to the expression of uncertainty in measurement (GUM). These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposefully designed to minimize atmospheric influences and effects of imperfect adjustment of the optical plumbing instrument.

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 7: Optical plumbing instruments

BS ISO 14490-3:2005 光学及光学仪器.望远镜系统的试验方法.望远镜瞄准具的试验方法

This part of ISO 14490 specifies test equipment and test procedures for the determination of the following optical characteristics of telescopic sights: — axial parallax; — parallax; — eye relief range; — reticle tracking.

Optics and optical instruments - Test methods for telescopic systems - Test methods for telescopic sights

BS ISO 14135-2:2003 光学及光学仪器.望远镜瞄准具规范.高性能仪器

This part of ISO 14135 applies to high-performance telescopic sights, used on hand-held firearms and airguns. It contains a classification of the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances. General-purpose telescopic sights are specified in part 1 of ISO 14135.

Optics and optical instruments - Specification for telescopic sights - High-performance instruments

BS ISO 14135-1:2003 光学及光学仪器.望远镜瞄准具规范.通用仪器

This part of ISO 14135 applies to general-purpose telescopic sights, used on hand-held firearms and airguns. It contains a classification to the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances. High-performance telescopic sights are specified in part 2 of ISO 14135.

Optics and optical instruments - Specification for telescopic sights - General-purpose instruments

DIN ISO 14490-3:2004 光学和光学仪器.远焦装置的试验方法.第3部分:望远镜瞄准具的试验方法

Specification of test methods for the measurement of specific characteristics of telescopic sights.

Optics and optical instruments - Test methods for telescopic systems - Part 3: Test methods for telescopic sights (ISO 14490-3:2004)

ISO 14490-3:2004 光学和光学仪器.望远镜系统的试验方法.第3部分:望远镜式瞄准具的试验方法

This part of ISO 14490 specifies test equipment and test procedures for the determination of the following optical characteristics of telescopic sights: — axial parallax; — parallax; — eye relief range; — reticle tracking.

Optics and optical instruments - Test methods for telescopic systems - Part 3: Test methods for telescopic sights