共找到 293 条与 望远镜、大地测量与航测仪器 相关的标准,共 20 页
本标准规定了激光指向仪系列基本参数、技术要求、试验方法、检验规则。 本标准适用于大地测量仪器中以激光指向的DQJ03,DQJ05和DQJl0级激光指向仪。
Laser orientation instrument
本标准规定了大地测量仪器三脚架分类、基本参数及尺寸、技术要求、试验方法、检验规则。 本标准适用于一般大地测量仪器用三脚架。
Geodetic instruments - Tripods
本标准规定了航空摄影测量照相机象面尺寸。 本标准适用于航空摄影测量照相机。
Image size of camera for aerial photogrammetry
本标准规定了大地测量仪器强制中心机构的配合尺寸。 本标准适用于具有强制中心机构的大地测量仪器和附件。
Geodetic intruments.Adaption dimension of fixed centering
本标准规定了大地测量仪器用水准标尺分类、技术要求、试验方法、检验规则。 本标准适用于大地测量仪器用的水准标尺。
Geodetic instuments.Levelling staffs
本标准规定了大地测量仪器的包装技术要求、包装试验、包装检验及包装标志。 本标准适用于经纬仪、水准仪、测距仪、平板仪、罗盘仪等大地测量仪器的出厂包装。对出口产品除符合本标准外,还应符合CB/T 13384的规定。
Packaging of geodetic instruments
本标准规定了大地测量仪器与三脚架之间的连接型式、紧固螺钉要求。 本标准适用于大的测量仪器与三脚架之间的螺纹型式的连接。
Geodetic instruments.Connection between instrument and tripod
本标准规定了罗盘仪系列及基本参数、技术要求、试验方法、检验规则。 本标准适用于地质普查、勘探、森林、矿山和大地测量用的各类罗盘仪。
Compasss
本标准规定了平板仪的系列及基本参数、技术要求、试验方法、监测规则。 本标准适用于大地测量仪器中固定视差角的DP3,DP5和DP15级平板仪。
Plane table equipments
MIL-T-81333A, dated 29 June 1988, is inactive for new design and is no longer used, except for replacement purposes.
TELESCOPE, MARK 100 MOD 0 AND 1
Geodetic instruments -- Theodolites -- Field procedures for determining accuracy
Geodetic instruments -- Levels -- Field procedures for determining accuracy
MIL-M-70453A(AR) dated 8 March 1993 is inactive for new design and no longer used except for replacement purposes.
MILITARY SPECIFICATION MOUNT, TELESCOPE: 9360169
Significance8212;This test method provides a means to measure the compatibility of a given transparency through which NVGs are used at night to view outside, nighttime ambient illuminated natural scenes. Use8212;This test method may be used on any transparent part, including sample coupons. It is primarily intended for use on large, curved, or thick parts that may already be installed (for example, windscreens on aircraft).1.1 This test method covers apparatuses and procedures that are suitable for measuring the NVG-weighted transmissivity of transparent parts including those that are large, thick, curved, or already installed. This test method is sensitive to transparencies that vary in transmissivity as a function of wavelength.1.2 Since the transmissivity (or transmission coefficient) is a ratio of two radiance values, it has no units. The units of radiance recorded in the intermediate steps of this test method are not critical; any recognized units of radiance (for example, watts/m2-str) may be used, as long as it is consistent.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts
This specification establishes the performance and design requinments for the Boresight Telescope Assembly and the Muzzle Boresight Device that uses a common telescope.
TELESCOPE ASSEMBLY, BORESIGHT, COMMON
This notice should be filed in fiont of MIL-M-45690A, dated 18 November 1963 MIL-M-45690A, dated 18 November 1963 with Amendment 4, dated 31 May 1985 is inactive for new design and is no longer used, except for replacement purposes.
MOUNT, TELESCOPE, M114
This notice should be filed in fiont of MIL-M-46312B, dated 15 August 1972
MOUNT, TELESCOPE, M146
This notice should be filed in front of MIL-T-70521A(AR) dated 22 October 1992
TELESCOPE, ELBOW: 9360257
This notice should be filed in front of MIL-T-50760(AR) dated 13 August 1971
TELESCOPE, ELBOW, 11737695
This notice should be filed in front of MIL-T-60826B(AR) dated 3 March 1975
TELESCOPE, M127A1
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号