N31 望远镜、大地测量与航测仪器 标准查询与下载



共找到 293 条与 望远镜、大地测量与航测仪器 相关的标准,共 20

This part of ISO 14135 applies to high-performance telescopic sights, used on hand-held firearms and airguns. It contains a classification of the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances. General-purpose telescopic sights are specified in part 1 of ISO 14135.

Optics and optical instruments - Specifications for telescopic sights - Part 2: High-performance instruments

ICS
37.020
CCS
N31
发布
2003-12
实施

This part of ISO 14135 applies to general-purpose telescopic sights, used on hand-held firearms and airguns. It contains a classification to the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances. High-performance telescopic sights are specified in part 2 of ISO 14135.

Optics and optical instruments - Specifications for telescopic sights - Part 1: General-purpose instruments

ICS
37.020
CCS
N31
发布
2003-12
实施

この規格は,望遠鏡に関する主な記号並びに用語及びその定義について規定する。

Vocabulary for telescopic systems

ICS
01.040.37;37.020
CCS
N31
发布
2003-03-20
实施

This is Technical Corrigendum 1 to ISO 8578-1997 (Optics and optical instruments — Microscopes — Marking of objectives and eyepieces)

Optics and optical instruments - Microscopes - Marking of objectives and eyepieces; Technical Corrigendum 1

ICS
37.020
CCS
N31
发布
2002-11
实施

This part of ISO 14132 gives terms, definitions and letter symbols of common notions that are typical for all types of telescopic systems. The alphabetical indexes of terms in English, French, Russian and German that are common for all published parts of ISO 14132 are published in this part of ISO 14132. The definitions may be changed, if required, by introducing derivative attributes into them, revealing the meanings of the terms used, show-ing the objects covered by the scope of the notion being defined. These changes shall not affect the scope and contents of this part of ISO 14132. NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this part of IS0 14132 gives the equivalent terms and definitions in the German language; these are published under

Optics and optical instruments - Vocabulary for telescopic systems - Part 1: General terms and alphabetical indexes of terms in ISO 14132

ICS
01.040.37;37.020
CCS
N31
发布
2002-11
实施

This part of ISO 14132 gives terms, definitions and letter symbols used in relation with binoculars, mono-culars and spotting scopes. The alphabetical indexes of terms in English, French, Russian and German that are common for all published parts of ISO 14132 are published in ISO 14132-1. The definitions may be changed, if required, by introducing derivative attributes into them, revealing the meanings of the terms used, showing the objects covered by the scope of the notion being defined. These changes shall not affect the scope and contents of this part of ISO 14132. NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this part of ISO 14132 gives the equivalent terms and definitions in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.

Optics and optical instruments - Vocabulary for telescopic systems - Part 2: Terms for binoculars, monoculars and spotting scopes

ICS
01.040.37;37.020
CCS
N31
发布
2002-11
实施

This part of ISO 14132 applies to telescopic sights used on hand-held firearms and gives terms and defini-tions for telescopic sights only. The alphabetical indexes of terms in English, French, Russian and German that are common for all published parts of ISO 14132 are published in ISO 14132-1. The definitions may be changed, if required, by introducing derivative attributes into them, revealing the meanings of the terms used, show-ing the objects covered by the scope of the notion being defined. These changes shall not affect the scope and contents of this part of ISO 14132. NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this part of ISO 14132 gives the equivalent terms and definitions in the German lan-guage; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the offi-cial languages can be considered as ISO terms and definitions.

Optics and optical instruments - Vocabulary for telescopic systems - Part 3: Terms for telescopic sights

ICS
01.040.37;37.020
CCS
N31
发布
2002-11
实施

This part of ISO 14132 applies to astronomical telescopes and gives terms and definitions for astro-nomical telescopes only. The alphabetical indexes of terms in English, French, Russian and German that are common for all published parts of ISO 14132 are published in ISO 14132-1. The definitions may be changed, if required, by introducing derivative attributes into them, revealing the meanings of the terms used, showing the objects covered by the scope of the notion being defined. These changes shall not affect the scope and contents of this part of ISO 14132. NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this part of ISO 14132 gives the equivalent terms and definitions in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.

Optics and optical instruments - Vocabulary for telescopic systems - Part 4: Terms for astronomical telescopes

ICS
01.040.37;37.020
CCS
N31
发布
2002-11
实施

Specification of a test method for the determination of the optical transfer function of telescopic systems under specified testing conditions.

Optics and optical instruments - Optical transfer function; Application - Part 3: Telescopes (ISO 9336-3:1994)

ICS
37.020
CCS
N31
发布
2002-07
实施

The document specifies requirements to be met by telescopes with regard to resistance of the optical, mechanical, chemical and electrical properties to environmental influences.

Optics and optical instruments - Environmental requirements - Part 4: Test requirements for telescopic systems (ISO 10109-4:2001)

ICS
37.020
CCS
N31
发布
2002-06
实施

이 규격은 측량 현장, 특히 일반 측량 단면 측량 평판 측량 및 공업 측량에 사용하는 거리

Optics and optical instruments-Geodetic instruments-Vocabulary

ICS
17.180.30
CCS
N31
发布
2002-03-11
实施
2002-03-11

General specification for simple computational collimators for guns

ICS
CCS
N31
发布
2002
实施

MIL-DTL-11589/55E, dated 21 January 1999, is hereby reactivated and may be used for either new or existing design acquisition.

PARALLEL RULERS, FOLDING TYPE

ICS
CCS
N31
发布
2001-09-25
实施

A-A-50211A, dated 5 February 1988, has been reviewed and determined to be valid for use in acquistion.

ROD, STADIA (FOLDING)

ICS
CCS
N31
发布
2001-09-25
实施

This part of ISO 10109 specifies requirements to be met with regard to resistance of the optical, mechanical, chemical and electrical properties or performance data of instruments to environmental influences and hence determines geographical and technical areas of application. It applies to optical instruments and instruments with optical components, including accessories, in the field of telescopic systems. Environmental test methods as specified in ISO 9022 are assigned to the various areas of application for the purpose of ascertaining the suitability of the instruments in their respective area of application. This part of ISO 10109 is the basis for the specification of environmental requirements and environmental tests in instrument standards. If necessary, these requirements and tests may be amended in the instrument standards. This part of ISO 10109 does not deal with the requirements to be met by the packaging of the instrument during transport from the manufacturer to the user. NOTE Nominal values of properties and performance characteristics as understood by this International Standard are predetermined by specifications provided by the manufacturer, technical terms of delivery and instrument standards.

Optics and optical instruments - Environmental requirements - Test requirements for telescopic systems

ICS
37.020
CCS
N31
发布
2001-09-24
实施
2001-09-24

This International Standard defines terms relating to geodetic field instruments only, e.g. distance meters, levels, theodolites and others, and their essential component parts which are normally used in terrestrial measuring operations of ordnance survey, topographic survey, plane survey and engineering survey. Therefore terms concerning fields such as the following are not mentioned, e.g. photogrammetry, astronomy, hydrographic survey and industrial metrology. Accessories which are not necessary for the functioning of the instruments are not dealt with. The terms are arranged in English alphabetical order. For practical reasons, terms in lightface type marked with an asterisk (*) are explained only in a note or in the context of the definition of another term. These terms can also be found in the alphabetical index. NOTE In addition to terms and definitions used in two of the three official ISO languages (English and French), this International Standard gives the equivalent terms in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.

Optics and optical instruments - Geodetic and surveying instruments - Vocabulary

ICS
01.040.17;17.180.30
CCS
N31
发布
2000-10
实施

This amendment forms a part of MIL-T 46316B(AR) dated 10 July 1968, and is approved for use by the US Army Armament, Research, Development, and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.

TELESCOPE, ELBOW: M118 SERIES AND T176E4

ICS
37.020
CCS
N31
发布
2000-04-26
实施

  本标准规定了航空摄影测量照相机象面尺寸。   本标准适用于航空摄影测量照相机。

Image size of camera for aerial photogrammetry

ICS
CCS
N31
发布
1999-08-06
实施
2000-01-01

  本标准规定了大地测量仪器三脚架分类、基本参数及尺寸、技术要求、试验方法、检验规则。   本标准适用于一般大地测量仪器用三脚架。

Geodetic instruments - Tripods

ICS
CCS
N31
发布
1999-08-06
实施
2000-01-01

  本标准规定了大地测量仪器用分划板的基本型式及主要尺寸要求。   本标准适用于大地测量仪器的分划板。不适用于大地天文测量仪器用分划板。

Geodetic instruments - Reticules

ICS
CCS
N31
发布
1999-08-06
实施
2000-01-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号