共找到 164 条与 机械振动、冲击设备与动平衡机 相关的标准,共 11 页
Servo-hydraulic test equipment for generating vibration. Method of describing characteristics.
この規格は振動及び衝撃ピックアップの校正の方法について規定するほか,感度を含むその他の特性の測定方法について規定する。絶対校正方法のうち,6.2.1に推奨できる方法を規定する。振動及び衝撃の比較校正方法についても規定する(6.3参照)。より詳細な事柄については,ISO 5347の他の部で規定する。ISO 5347-0は,連続して出力を発生する並進加速度,速度及び変位ピックアップに適用し,信頼性及び再現性のある結果が得られる校正方法を規定する。の規格は,回転振動ピックアップの校正には適用できない。
Methods for the calibration of vibration and shock pick-ups -- Basic concepts
Gives the potential user of a particular shock machine an adequate description of the characteristics of the machine and gives guidance for the selection of such machines.
Guide for characteristics and performance of mechanical shock testing machines
Characteristics of equipment used for generating linear vibrations and serves as a guide for the selection of such equipment.
Method for describing characteristics of servo-hydraulic test equipment for generating vibration
Establishes a list and the standard method of obtaining certain properties. Provides two levels of description to be used.
Servo-hydraulic test equipment for generating vibration; method of describing characteristics
Describes the mounting characteristics of accelerometers to be specified by the manufacturer and makes recommendations to the user for mounting accelerometers. The application of this standard is limited to the mounting of electromechanical transducers of the type that are attached on the surface of the structure in motion. It does not cover other types, such as relative motion pickups. This standard is in general accordance with ISO 5348-1987.
Guide to Mechanical Mounting of Accelerometers
This standard specifies rules for the presentation of important characteristics for electro-mechanical shock and vibration transducers (seismic pick-ups), the electrical outputs of which are known functions of the uniaxial, multiaxial, or angular accelerations, velocities, or displacements of objects the motions of which are being measured.
Characteristics to be Specified for Seismic Transducers
Mechanical vibration and shock; Mechanical mounting of accelerometers
Spring-operated impact-test apparatus and its calibration
Balancing machines; Description and evaluation
Spring-operated impact-test apparatus and its calibration
This guide delineates the methods and procedures which may be used to determine the structural mobility properties, translational and rotational, of a system of points on a structure. This guide is to be used for guidance only, since the state of the art is still in flux.
Guide to the Experimental Determination of Rotational Mobility Properties and the Complete Mobility Matrix
This international Standard defines the content of the information flow to be established between manufacturers and users of auxiliary tables with a view to working out related specifications characteistics advertised by the various manufacturers of auxiliary tables and associated guidance systems.
Test equipment for generating vibration.. Methods of describing characteristics of auxiliary tables for test equipment for generating vibration
Balancing machines; Symbols for front panels Trilingual edition
The American National Standard classifies rotors into groups in accordance with their balancing requiements,establishes methods of assessment of final unbalance,and gives initial guidance on the establishment of balance quality grades so that,ultimately,balance quality grades can be established for all types of flexible rotors. All rotors are therefore classified to indicate which can be balanced by normal or modified rigid rotor balancing techniques and which rquire some form of high-speed balancing.Classification of rotors into different categories permits the use of simplified balancing methods for some rotors.For all other rotors,suitable balancing methods are recommended. As in the case of ANSI S2.19-1975,this American National Standard is not intended to serve as an acceptance specification for any rotor group,but rather to give indications of how to avoid gross defiencies as well as exaggerated or unattainable requirements.Nevertheless,it may serve as a basis for more involved investigations,for example when a more exact determination of the required balance quality is necessary.If due regard is paid to the specified limits or methods of manufacture and balance,satisfactory running conditions can most probably be expected.However,there may be cases where deviations from this standard may be necessary.
Procedures for Balancing Flexible Rotors ASA 46-1982
Test equipment for generating vibration - Methods of describing characteristics of electrodynamic test equipment for generating vibration
Applies to tables associated with one or several generators working along axes which are parallel to the longitudinal axis of the table. Deals with several types of tables. Provides three levels of description to be used in describing test equipment.
Auxiliary tables for vibration generators; Methods of describing equipment characteristics
This standard applies to the auxiliary equipment used between a shock or vibration transducer and the final indicator, recorder, or signal processor. This document presents a standard format for indicating pertinent characteristics but does not in any re
Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements
Field balancing equipment; Description and evaluation
Настоящий стандарт распространяется на вибрационный стенд ВУ-15М, предназначенный для испытания изделий на воздействие вибрационных нагр
Mechanical vibration stand VU-15M. Quality requirements for certified products
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号