N73 机械振动、冲击设备与动平衡机 标准查询与下载

ISO 5348:1998 机械振动与冲击 加速计的机械安装

This International Standard describes the mounting characteristics of accelerometers to be specified by the manufacturer and makes recommendations to the user for mounting accelerometers. Application of this International Standard is limited to the mounting of accelerometers which are mounted on the surface of the structure in motion, as illustrated in the simplified diagram shown in figure 1. It is not applicable to other types of transducers, such as relative motion pick-ups.

Mechanical vibration and shock - Mechanical mounting of accelerometers

JJF 1030-1998 恒温槽技术性能测试规范

Measurement and Test Norm of Thermostatic Bath's Technological Characteristic

ISO 1940-2:1997 机械振动 刚性转子的平衡质量要求 第2部分:平衡误差

GB／T 9239的本部分述及了以下内容： ——恒态(刚性)转子平衡过程中误差的鉴别； ——误差的评价； ——考虑误差的准则； ——在两个校正平面上剩余不平衡量的评价。

Mechanical vibration - Balance quality requirements of rigid rotors - Part 2: Balance errors

ISO 5347-20:1997 振动和冲击传感器的校准方法.第20部分:用互惠法做最初的振动校验

Methods for the calibration of vibration and shock pick-ups - Part 20: Primary vibration calibration by the reciprocity method

ISO 5347-22:1997 振动与冲击传感器的校准方法 第22部分:加速计共振试验 普通方法

Lays down detailed specifications for the instrumentation and procedures to be used for accelerometer resonance testing. Does apply to rectilinear accelerometers of the piezoresistive, piezoelectric and variable capacitance types in the frequency range 50 Hz to 200 kHz.

Methods for the calibration of vibration and shock pick-ups - Part 22: Accelerometer resonance testing - General methods

WJ 2419-1997 火箭炮扭板式平衡机规范

Specification for rocket launcher torsion plate balancing machine

WJ 2426-1997 气动锤击试验方法

Pneumatic hammer test method

JB/T 7789-1995 双面立式平衡机.技术条件

本标准规定了双面立式平衡的技术要求、检验规则、标志与包装等内容。 本标准适用于双面立式平衡机。

Double-plane vertical balancing machine - Technical specifications

ISO 1925:1990/Amd 1:1995 机械振动.平衡.词汇.修改件1

Mechanical vibration - Balancing - Vocabulary; Amendment 1

JIS B 7737:1995 平衡试验机

この規格は，剛性ロータを支持して，任意の測定面における不釣合いの大きさ及び不釣合い角度を指示する釣合い試験機(以下，試験機という。)について規定する。

Balancing machines

BS 7519:1995 机械振动.平衡试验及相关仪器用符号

This International Standard es-tablishes symbols for use on balancing machines including instrumentation. They are in-tended to complement (but not replace) those already standard-ized in documents such as ISO 7000. The primary purpose of the symbols in this International Standard is to explain the functions and uses of the indicators and controls etc. which are an integral part of a balancing machine.

Mechanical vibration - Symbols for balancing and associated instrumentation

ISO 3719:1994 机械振动 平衡试验机及相关仪器用符号

Cancels and replaces the first edition (1982). Establishes symbols for use on balancing machines including instrumentation. They are intended to complement those already standardized in documents such as ISO 7000. The primary purpose of the symbols is to explain the functions and uses of the indicators and controls which are an integral part of a balancing machine.

Mechanical vibrations - Symbols for balancing machines and associated instrumentation

JB/T 7407-1994 包装件跌落试验机技术条件

本标准规定了包装件跌落试验机的基本参数、技术要求、检验方法与检验规则、标志与包装。 本标准适用于跌落高度不大于2000mm的跌落试验机。

Specifications for package drop test machine

WJ 2258-1994 多臂式震动试验机检定规程

Verification regulations for multi-arm vibration testing machine

WJ 2257-1994 锤击试验机检定规程

Hammer testing machine verification regulations

JB/T 6869-1993 水平振动台（正弦）技术条件

　　本标准规定了水平振动台(联用水平滑台的电动振动台或液压振动台)的基本参数、技术要求、试验方法和检验规则等。 　　本标准适用于正弦振动试验用的水平振动台。其联用的水平滑台限于采用油膜或静压支承原理设计制造的，台面面积为1m^（2），且配用单个振动台的滑台。

Horizontal vibration table (sine) technical conditions

JB/T 6867-1993 陀螺转子平衡机技术条件

本标准描述了陀螺转子平衡机的组成，规定了陀螺转子平衡机的技术要求、试验方法、检验规则、成套性与随机文件、标志与包装和质量保证。 本标准适用于自驱动陀螺转子平衡机。

Technical conditions of gyro rotor balancing machine

JB/T 6868-1993 冲击台技术条件

　　本标准规定了冲击台的基本参数、技术要求、试验方法和检验规则等。 　　本标准适用于“规定冲击脉冲”试验方法、负载在500kg以下的冲击台。

Impact table technical conditions

JB/T 6076-1992 振动台选择指南

本标准规定了主要类型振动台的选择方法和基本要求。 本标准适用于用户根据试验要求选择振动台。

Shaker Selection Guide

ASTM D5277-92(2008) 使用倾斜材料冲击试验机运行程序设计水平冲击的标准试验方法

This test method is for use in evaluating the capability of a container or shipping system to withstand sudden shocks and crushing forces, such as those generated from rail switching impacts or pallet marshalling, or to evaluate the capability of a container and its inner packing, or shipping system, to protect its contents during the sudden shocks and crushing forces resulting from rail switching or pallet marshalling impacts. This test method may also be used to compare the performance of different container designs or shipping systems. The test may also permit observation of the progressive failure of a container or shipping system and damage to the contents. See Practice D 4169 for additional guidance. This test method is not suitable for reproducing impact resulting from the switching of rail cars using long-travel draft gear or cushioned underframes. Refer to Method D 4003 (revised) as a more suitable method for testing under these circumstances, or when more precise control of shock inputs is required.1.1 This test method covers the procedures for reproducing and comparing shock damage, such as that which may result from rail switching or pallet marshalling impacts, using an incline impact tester. It is suitable for simulating the types of shock pulses experienced by lading in rail switching of rail cars with standard draft gear, but not for those with long travel draft gear or cushioned underframes. The test method can also be used for pallet marshalling tests. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Section 6.

Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester