N73 机械振动、冲击设备与动平衡机 标准查询与下载

NF E90-220:1991 产生振动用伺服 - 液压试验设备.特性描述方法

Servo-hydraulic test equipment for generating vibration. Method of describing characteristics.

JIS B 0908:1991 振动及冲击传感器的校准方法.基本概念

この規格は振動及び衝撃ピックアップの校正の方法について規定するほか，感度を含むその他の特性の測定方法について規定する。絶対校正方法のうち，6.2.1に推奨できる方法を規定する。振動及び衝撃の比較校正方法についても規定する(6.3参照)。より詳細な事柄については，ISO 5347の他の部で規定する。ISO 5347-0は，連続して出力を発生する並進加速度，速度及び変位ピックアップに適用し，信頼性及び再現性のある結果が得られる校正方法を規定する。の規格は，回転振動ピックアップの校正には適用できない。

Methods for the calibration of vibration and shock pick-ups -- Basic concepts

BS 7347:1990 机械冲击试验机性能和特性导则

Gives the potential user of a particular shock machine an adequate description of the characteristics of the machine and gives guidance for the selection of such machines.

Guide for characteristics and performance of mechanical shock testing machines

BS 7285:1990 振动发生伺服液压试验设备的特性描述方法

Characteristics of equipment used for generating linear vibrations and serves as a guide for the selection of such equipment.

Method for describing characteristics of servo-hydraulic test equipment for generating vibration

ISO 8626:1989 液压伺服振动试验设备 特性描述方法

Establishes a list and the standard method of obtaining certain properties. Provides two levels of description to be used.

Servo-hydraulic test equipment for generating vibration; method of describing characteristics

ANSI/ASA S2.61-1989 加速计机械安装指南

Describes the mounting characteristics of accelerometers to be specified by the manufacturer and makes recommendations to the user for mounting accelerometers. The application of this standard is limited to the mounting of electromechanical transducers of the type that are attached on the surface of the structure in motion. It does not cover other types, such as relative motion pickups. This standard is in general accordance with ISO 5348-1987.

Guide to Mechanical Mounting of Accelerometers

ANSI/ASA S2.46-1989 地震传感器专有特性

This standard specifies rules for the presentation of important characteristics for electro-mechanical shock and vibration transducers (seismic pick-ups), the electrical outputs of which are known functions of the uniaxial, multiaxial, or angular accelerations, velocities, or displacements of objects the motions of which are being measured.

Characteristics to be Specified for Seismic Transducers

ISO 5348:1987 机械振动和冲击.加速计的机械安装

Mechanical vibration and shock; Mechanical mounting of accelerometers

HD 495 S1-1987 弹簧操纵的冲击试验装置及其校准

Spring-operated impact-test apparatus and its calibration

ISO 2953:1985 平衡机械.描述和评定

Balancing machines; Description and evaluation

IEC 60817:1984 弹簧操作冲击试验装置及其校准

Spring-operated impact-test apparatus and its calibration

ANSI/ASA S2.34-1984 回转移动性特征和完全移动性矩阵的实验测定指南

This guide delineates the methods and procedures which may be used to determine the structural mobility properties, translational and rotational, of a system of points on a structure. This guide is to be used for guidance only, since the state of the art is still in flux.

Guide to the Experimental Determination of Rotational Mobility Properties and the Complete Mobility Matrix

BS 6140-2:1982 振动试验装置 振动试验装置辅助台特性的描述方法

This international Standard defines the content of the information flow to be established between manufacturers and users of auxiliary tables with a view to working out related specifications characteistics advertised by the various manufacturers of auxiliary tables and associated guidance systems.

Test equipment for generating vibration.. Methods of describing characteristics of auxiliary tables for test equipment for generating vibration

ISO 3719:1982 平衡试验机.面板的符号

Balancing machines; Symbols for front panels Trilingual edition

ASA S2.42-1982 平衡柔性转子规程 ASA 46-1982

The American National Standard classifies rotors into groups in accordance with their balancing requiements,establishes methods of assessment of final unbalance,and gives initial guidance on the establishment of balance quality grades so that,ultimately,balance quality grades can be established for all types of flexible rotors. All rotors are therefore classified to indicate which can be balanced by normal or modified rigid rotor balancing techniques and which rquire some form of high-speed balancing.Classification of rotors into different categories permits the use of simplified balancing methods for some rotors.For all other rotors,suitable balancing methods are recommended. As in the case of ANSI S2.19-1975,this American National Standard is not intended to serve as an acceptance specification for any rotor group,but rather to give indications of how to avoid gross defiencies as well as exaggerated or unattainable requirements.Nevertheless,it may serve as a basis for more involved investigations,for example when a more exact determination of the required balance quality is necessary.If due regard is paid to the specified limits or methods of manufacture and balance,satisfactory running conditions can most probably be expected.However,there may be cases where deviations from this standard may be necessary.

Procedures for Balancing Flexible Rotors ASA 46-1982

BS 6140-1:1981 产生振动用试验设备.第1部分:产生振动用电动试验设备性能的表述方法

Test equipment for generating vibration - Methods of describing characteristics of electrodynamic test equipment for generating vibration

ISO 6070:1981 振动发生器辅助台 设备特性的描述方法

Applies to tables associated with one or several generators working along axes which are parallel to the longitudinal axis of the table. Deals with several types of tables. Provides three levels of description to be used in describing test equipment.

Auxiliary tables for vibration generators; Methods of describing equipment characteristics

ANSI S2.4-1976 冲击和振动测量用辅助模拟设备特性的规定方法

This standard applies to the auxiliary equipment used between a shock or vibration transducer and the final indicator, recorder, or signal processor. This document presents a standard format for indicating pertinent characteristics but does not in any re

Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements

ISO 2371:1974 工作场地用平衡设备.描述和评定

Field balancing equipment; Description and evaluation

GOST 5.1948-1973 机械振动台VU-15M.认证产品质量要求

Настоящий стандарт распространяется на вибрационный стенд ВУ-15М, предназначенный для испытания изделий на воздействие вибрационных нагр

Mechanical vibration stand VU-15M. Quality requirements for certified products