N73 机械振动、冲击设备与动平衡机 标准查询与下载
共找到 164 条与 机械振动、冲击设备与动平衡机 相关的标准，共 11 页
本标准规定了单面立式平衡机的技术要求、检测方法、检测规则、标志与包装等内容。本标准适用于单面立式平衡机(以下简称平衡机)。
Single-plane vertical balancing machines.Technical specification
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了通用卧式硬支承平衡机的术语和定义、符号、基本参数、技术要求、检验方法、检验规则、标志、包装等。本标准适用于通用卧式硬支承平衡机(以下简称平衡机)。
Horizontal hard-bearing balancing machines.Technical specification
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2013-04-25
- 实施
- 2013-09-01
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This Aerospace Recommended Practice (ARP) delineates the technical specifications for rotating type of soft-bearing, single plane (i.e., static) balancing machine used for measuring the amount and angle of unbalance in gas turbine rotors.
Balancing Machines - Description and Evaluation Vertical, Single-Plane, Soft-Bearing Type for Gas Turbine Rotors
- ICS
- 49.050
- CCS
- N73
- 发布
- 2012-12-17
- 实施
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. To define a standard method for the Periodic Surveillance of Horizontal Dynamic Balancing Machines. This document specifies those requirements and procedures for periodic tests to insure maintenance of balance machine capabilities for balancing jet engine components.
Periodic Surveillance Procedures for Horizontal Dynamic Balancing Machines
- ICS
- 21.120.40;49.050
- CCS
- N73
- 发布
- 2012-12-17
- 实施
本规范适用于加速度型滚动轴承振动测量仪的校准。
Calibration Specification for Vibrometer(Acceleration)of Rolling Bearings
- ICS
- CCS
- N73
- 发布
- 2012-12-12
- 实施
- 2013-03-12
Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012)
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-10-01
- 实施
Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)
- ICS
- 17.160
- CCS
- N73
- 发布
- 2012-10
- 实施
Mechanical vibration. Rotor balancing. Procedures for assessing balance errors
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-08-31
- 实施
- 2012-08-31
Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012)
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-08
- 实施
Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012)
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-08
- 实施
This part of ISO 21940 specifies the requirements for the following: a) identifying errors in the unbalance measuring process of a rotor; b) assessing the identified errors; c) taking the errors into account. This part of ISO 21940 specifies balance acceptance criteria, in terms of residual unbalance, for both directly after balancing and for a subsequent check of the balance quality by the user. For the main typical errors, this part of ISO 21940 lists methods for their reduction in an informative annex.
Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-07
- 实施
Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-07
- 实施
Mechanical vibration. Rotor balancing. Enclosures and other protective measures for the measuring station of balancing machines
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-06-30
- 实施
- 2012-06-30
This part of ISO 21940 specifies requirements for enclosures and other protective measures used to minimize mechanical hazards produced by the rotor in the unbalance measuring station of centrifugal (rotational) balancing machines. The hazards are associated with the operation of balancing machines under a variety of rotor and balancing conditions. This part of ISO 21940 defines different classes of protection that enclosures and other protective measures provide and describes the limits of applicability for each class of protection. Devices for adjusting the mass distribution of a rotor and devices to transfer the rotor are not covered by this part of ISO 21940, even if they are combined with the measuring station. Special enclosure features, such as noise reduction, windage reduction or vacuum (which may be required to spin bladed rotors at balancing speed), are not covered by this part of ISO 21940.
Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-06
- 实施
Mechanical vibration. Rotor balancing. Criteria and safeguards for the insitu balancing of medium and large rotors
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-04-30
- 实施
- 2012-04-30
Mechanical vibration. Rotor balancing. Shaft and fitment key convention
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-04-30
- 实施
- 2012-04-30
Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-03-01
- 实施
Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2012-03-01
- 实施
이 표준은 여러 제작자들에 의해 선전되는 보조 테이블과 지침서의 여러 특성과 목적을 비교하
Auxiliary tables for vibration generators-Methods of describing equipment characteristics
- ICS
- 17.160
- CCS
- N73
- 发布
- 2011-12-30
- 实施
- 2011-12-30
이 표준은 현장에 자체 베어링 위에 설치되어 있는 중대형 회전체를 평형잡기 할 때 적용되는
Mechanical vibration-Criteria and safeguards for the in-situ balancing of medium and large rotors
- ICS
- 21.120.40
- CCS
- N73
- 发布
- 2011-12-30
- 实施
- 2011-12-30
