P31 建筑物理 标准查询与下载

DB37/T 5196-2021 建筑气密性能检测标准（风机气压法）

本标准适用于新建、改建、和扩建的民用建筑围护结构气密性能的测试。

Building airtight performance testing standard (fan air pressure method)

ANSI/ASHRAE 55 ERTA-2021 人类居住热环境条件

Thermal Environmental Conditions for Human Occupancy

ANSI/ASHRAE 55 Addendum E-2021 人类居住热环境条件

Thermal Environmental Conditions for Human Occupancy

ANSI/ASHRAE 55 Addendum F-2021 人类居住热环境条件

Thermal Environmental Conditions for Human Occupancy

DB11/T 643-2021 屋面保温隔热技术规程

Technical specification for roof thermal insulation

ISO 9869-2:2018/Amd 1:2021 热绝缘. 建筑构件. 热阻和传热的现场测定. 第2部分: 框架结构住宅的红外法. 修改件1: 不确定度分析的计算示例

Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 2: Infrared method for frame structure dwelling - Amendment 1: Example of calculation of uncertainty analysis

NF S31-049-2*NF EN ISO 10140-2:2021 声学. 建筑物组件隔音的实验室测定. 第2部分: 空气隔声测量

Acoustics - Laboratory measurement of sound insulation of building elements - Part 2 : measurement of airborne sound insulation

ANSI/ASHRAE 55 Addendum A-2021 人类居住热环境条件

Thermal Environmental Conditions for Human Occupancy

ANSI/ASHRAE 55 Addendum C-2021 人类居住热环境条件

Thermal Environmental Conditions for Human Occupancy

ANSI/ASHRAE 55 Addendum B-2021 人类居住热环境条件

Thermal Environmental Conditions for Human Occupancy

DB11/T 367-2021 地下室防水技术规程

Basement Waterproof Technical Regulations

ISO 10140-2:2021 声学. 建筑物组件隔音的实验室测定. 第2部分: 空中隔音测量

This document specifies a laboratory method for measuring the airborne sound insulation of building products, such as walls, floors, doors, windows, shutters, façade elements, façades, glazing, small technical elements, for instance transfer air devices, airing panels (ventilation panels), outdoor air intakes, electrical raceways, transit sealing systems and combinations, for example walls or floors with linings, suspended ceilings or floating floors. The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings. The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this document are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions and total loss factor.

Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation

DIN EN ISO 12999-1:2021 声学. 建筑声学测量不确定度的测定和应用. 第1部分: 隔音(ISO 12999-1-2020); 德文版本EN ISO 12999-1-2020

This document specifies procedures for assessing the measurement uncertainty of sound insulation in building acoustics. It provides for - a detailed uncertainty assessment; - a determination of uncertainties by inter-laboratory tests; - an application of uncertainties. Furthermor

Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020); German version EN ISO 12999-1:2020

DIN/TS 18599-12:2021 建筑物能源效率 供暖、制冷、通风、生活热水和照明的净能源、最终能源和一次能源需求的计算 第12部分：住宅建筑制表方法

DIN/TS 18599-12 specifies a method for residential buildings based on precalculated tables. The tables are determined according to the general approaches of the individual parts of this series of prestandards (DIN V 18599) and are based on a simplified table method in accordance

Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 12: Tabulation method for residential buildings

ISO 10140-5:2021 声学. 建筑物组件隔音的实验室测定. 第5部分: 试验设备和仪器的要求

This document specifies laboratory test facilities and equipment for sound insulation measurements of building elements, such as: — components and materials; — building elements; — technical elements (small building elements); — sound insulation improvement systems. It is applicable to laboratory test facilities with suppressed radiation from flanking elements and structural isolation between source and receiving rooms. This document specifies qualification procedures for use when commissioning a new test facility with equipment for sound insulation measurements. It is intended that these procedures be repeated periodically to ensure that there are no issues with the equipment and the test facility.

Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment

ISO 10140-3:2021 声学. 建筑物组件隔音的实验室测定. 第3部分: 冲击声隔音测量

This document specifies laboratory methods for measuring the impact sound insulation of floor assemblies. The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings. The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this document are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions, and loss factor. A test method is specified that uses the standard tapping machine (see ISO 10140-5:2021, Annex E) to simulate impact sources like human footsteps when a person is wearing shoes. Alternative test methods, using a modified tapping machine or a heavy/soft impact source (see ISO 10140-5:2021, Annex F) to simulate impact sources with strong low frequency components, such as human footsteps (bare feet) or children jumping, are also specified. This document is applicable to all types of floors (whether heavyweight or lightweight) with all types of floor coverings. The test methods apply only to laboratory measurements.

Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation

ANSI/ASHRAE 90.1 I-P INT 5-2021 低层住宅除外的建筑物能量标准

Energy Standard for Buildings Except Low-Rise Residential Buildings

ANSI/ASHRAE 90.1 I-P Addendum W-2021 低层住宅建筑除外的能量标准

Energy Standard for Buildings Except Low-Rise Residential Buildings

DIN EN 16205:2021 地板上行走噪音的实验室测量; 德文版本EN 16205-2020

This European Standard specifies a laboratory measurement method to determine noise radiated from a floor covering on a standard concrete floor when excited by a standard tapping machine.

Laboratory measurement of walking noise on floors; German version EN 16205:2020

DB11/T 1811-2020 厨房、厕浴间防水技术规程

Technical specification for waterproofing of kitchens and toilets