P31 建筑物理 标准查询与下载

BS EN ISO 717-2:2020 声学. 建筑和建筑构件的隔声标定. 第2部分: 撞击声隔声

Acoustics. Rating of sound insulation in buildings and of building elements. Impact sound insulation

BS EN ISO 717-1:2020 声学. 建筑和建筑构件的隔声标定. 第1部分: 空气声隔声

Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation

BS EN 16205:2020 地板上行走噪音的实验室测量

Laboratory measurement of walking noise on floors

ISO 717-2:2020 声学. 建筑和建筑构件的隔声标定. 第2部分: 撞击声隔声

This document a) defines single-number quantities for impact sound insulation in buildings and of floors, c) defines single-number quantities for the impact sound reduction of floor coverings and floating floors calculated from the results of measurements carried out in accordance with ISO 10140-3, and b) gives rules for determining these quantities from the results of measurements carried out in one-third-octave bands in accordance with ISO 10140-3 and ISO 16283-2, and in octave bands in accordance with that option in ISO 16283-2 for field measurements only, d) specifies a procedure for evaluating the weighted reduction in impact sound pressure level by floor coverings on lightweight floors. The single-number quantities in accordance with this document are intended for rating impact sound insulation and for simplifying the formulation of acoustical requirements in building codes. An additional single-number evaluation in steps of 0,1 dB is indicated where it is needed for the expression of uncertainty (except for spectrum adaptation terms). Numerical values of the single-number quantities are specified where required for calculations. The rating of measurements over an enlarged frequency range is given in Annex A. A method for obtaining single-number quantities for bare heavy floors according to their performance in combination with floor coverings is given in Annex B. Example calculations of single-number quantities are given in Annex C. The rating of measurements with a heavy and soft impact source (rubber ball) is given in Annex D.

Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation

ISO 717-1:2020 声学. 建筑和建筑构件的隔声标定. 第1部分: 空气声隔声

This document a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows, c) gives rules for determining these quantities from the results of measurements carried out in onethird-octave or octave bands for example in accordance with ISO 10140-2 and ISO 16283-1. b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building, and The single-number quantities in accordance with this document are intended for rating airborne sound insulation and for simplifying the formulation of acoustical requirements in building codes. An additional single-number evaluation in steps of 0,1 dB is indicated for the expression of uncertainty (except for spectrum adaptation terms). The required numerical values of the single-number quantities are specified according to varying needs. The single-number quantities are based on results of measurements in one-third-octave bands or octave bands. For laboratory measurements made in accordance with ISO 10140-2, single-number quantities are calculated using one-third-octave bands only. The rating of results of measurements carried out over an enlarged frequency range is dealt with in Annex B.

Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation

NF S31-074*NF EN 16205:2020 地板上行走噪音的实验室测量

Domaine d'applicationLe présent document spécifie une méthode de mesurage en laboratoire pour déterminer le bruit rayonné par un revêtement de sol sur un plancher en béton normalisé lorsqu'il est excité par une machine à chocs normalisée.

Laboratory measurement of walking noise on floors

NF S31-999-1:2020 声学. 建筑声学测量不确定度的测定和应用. 第1部分: 隔音

Domaine d'applicationLe présent document spécifie des méthodes permettant d'évaluer l'incertitude de mesure de l'isolement acoustique dans le domaine de l'acoustique des bâtiments. Il prévoit:- l'évaluation détaillée de l'incertitude;- la détermination des incertitudes par des es

Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1 : sound insulation

DIN 18073:2020 建筑的卷帘、遮阳篷和其他百遮帘和百叶窗. 术语和定义及使用标准

This standard applies to shutters, external blinds, internal blinds and awnings according to DIN EN 12216.

Roller shutters, awnings and other blinds and shutters in buildings - Terms and definitions and criteria for use

T/CIES 030-2020 中小学教室健康照明设计规范

Design specifications for healthy lighting in classrooms of primary and secondary schools

DB31/T 539-2020 中小学校及幼儿园教室照明设计规范

Specifications for lighting design of classrooms in primary and secondary schools and kindergartens

DB34/ 1466-2019 居住建筑节能设计标准

本标准适用于安徽省各地城镇规划区新建、扩建和改建居住建筑的建筑节能设计。

Design Standards for Energy Conservation of Residential Buildings

DB32/T 3702-2019 江苏省日照分析技术规程

本规程适用于江苏省内市、县（市）规划建设用地范围内工程建设项目的规划设计、建筑设计和规划许可等事项的日照分析。

Jiangsu Province Sunshine Analysis Technical Regulations

T/CECS 10064-2019 绿色建材评价 LED照明产品

规定了LED照明产品的术语与定义、评价要求和评价方法。

Assessment standard for green building materials - LED lighting product

JIS A 1418-2:2019 声学. 建筑物隔绝地板冲击燥音的测量. 第2部分: 使用标准重型冲击源的方法

Acoustics -- Measurement of floor impact sound insulation of buildings -- Part 2: Method using standard heavy impact sources

JIS A 9501:2019 隔热工程的标准实施规程

Standard practice for thermal insulation works

DB11/T 1597-2018 文物建筑勘察设计文件编制规范

Specifications for compilation of survey and design documents for cultural relics buildings

BS EN ISO 16283-2:2018 声学. 建筑物和建筑物构件隔声的实地测量. 冲击声隔音

Acoustics. Field measurement of sound insulation in buildings and of building elements. Impact sound insulation

JG/T 519-2018 建筑用热流计

　　现批准《建筑用热流计》为建筑工业行业产品标准，编号为JG/T519-2018，自2018年12月1日起实施。原《建筑用热流计》JG/T3016-1994同时废止。 　　本标准在住房城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房城乡建设部标准定额研究所组织中国标准出版社出版发行。 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　中华人民共和国住房和城乡建设部 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　2018年5月30日

Heat flow meter for building

ISO 16283-2:2018 声学. 建筑物和建筑物构件隔声的实地测量. 第2部分: 冲击声隔音

Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation

DIN EN 16205:2018 地板上行走噪音的实验室测量; 德文版本EN 16205-2013+A1-2018

This European Standard specifies a laboratory measurement methods to determine noise radiated from a floor covering on a standard concrete floor when excited by a standard tapping machine. Extension of the existing standard to resilient flooring, textile flooring and laminate floor coverings; the amended draft to include an annex reporting about the inter-laboratory trials to be conducted, covering representative samples of all CEN/TC 134 product groups.

Laboratory measurement of walking noise on floors; German version EN 16205:2013+A1:2018