P31 建筑物理 标准查询与下载

WH/T 79-2018 美术馆照明规范

Art Museum Lighting Specifications

DB11/T 1516-2018 古建筑类博物馆合理用能指南

Guidelines for Rational Energy Use of Ancient Architecture Museums

DIN EN ISO 52017-1:2018 建筑物能源性能.感热和潜热负荷以及室内温度.第1部分:通用计算程序(ISO 52017-1-2017);德文版本EN ISO 52017-1-2017

This document specifies the general assumptions, boundary conditions and equations for the calculation, under transient hourly or subhourly conditions, of the internal temperatures (air and operative) and/or the heating, cooling and humidification and dehumidification loads to hold a specific (temperature, moisture) set point, in a single building zone. No specific numerical techniques are imposed by this document. Specific calculation procedures based on the generic calculation procedures of this document are given in ISO 52016-1. The specific simplifications, assumptions and boundary conditions in ISO 52016-1 are tailored to the respective application areas, such as the energy need for heating and cooling and for humidification and dehumidification, hourly internal temperature, design heating and cooling and humidification and dehumidification load.

Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017); German version EN ISO 52017-1:2017

DIN EN ISO 10211:2018 建筑结构热桥.热流和表面温度.详细计算(ISO 10211-2017);德文版本EN ISO 10211-2017

This document sets out the specifications for a three-dimensional and a two-dimensional geometrical model of a thermal bridge for the numerical calculation of - heat flows, in order to assess the overall heat loss from a building or part of it, and - minimum surface temperatures, in order to assess the risk of surface condensation. These specifications include the geometrical boundaries and subdivisions of the model, the thermal boundary conditions, and the thermal values and relationships to be used. This document is based upon the following assumptions: - all physical properties are independent of temperature; - there are no heat sources within the building element. This document can also be used for the derivation of linear and point thermal transmittances and of surface temperature factors.

Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017); German version EN ISO 10211:2017

DIN EN ISO 13370:2018 建筑物热性能.经由地面的热传递.计算方法(ISO 13370-2017);德文版本EN ISO 13370-2017

This document provides methods of calculation of heat transfer coefficients and heat flow rates for building elements in thermal contact with the ground, including slab-on-ground floors, suspended floors and basements.

Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017); German version EN ISO 13370:2017

DIN EN ISO 52018-1:2018 建筑物能源性能.热能平衡和组构特征相关部分EPB要求指标.第1部分:选项综述(ISO 52018-1-2017);德文版本EN ISO 52018-1-2017

The set of EPB assessment standards produces a great number of overall and partial EPB indicators as outputs, which can be used for different purposes. This document deals with the use as requirement of partial EPB indicators related to the fabric and related to the thermal balance of the building. Thermal balance aspects concern both the heating and cooling needs and the free floating temperatures, especially with respect to overheating or too cold indoor temperatures. This document can support both private parties and public regulators (and all stakeholders involved in the regulatory process) with the "post-processing" of these outputs. This document provides standardized tables for reporting, in a structured and transparent manner, the choices that are to be made with respect to the partial EPB requirements covered by this document. The tables are non-restrictive, thus allowing for full regulatory flexibility.

Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017); German version EN ISO 52018-1:2017

DIN EN ISO 52003-1:2018-03 建筑物能源性能.指标,要求,评级和证书.第1部分:总体能源性能的通用方面和应用(ISO 52003-1-2017);德文版本EN ISO 52003-1-2017

The set of EPB assessment standards produces a great number of overall and partial EPB indicators as outputs. This document provides general insight to both private parties and public regulators (and all stakeholders involved in the regulatory process) on how to make good use of these outputs for different purposes (post-processing). This document describes the relation between the EPB indicators and the EPB requirements and EPB ratings, and it discusses the importance of project-specific, tailored values as requirement or reference for certain EPB indicators. This document also includes a couple of possible EPB labels and it lists the different steps to be taken when establishing an EPB certification scheme. This document provides standardized tables for reporting in a structured and transparent manner the choices that are to be made with respect to overall EPB requirements. The tables are non-restrictive, thus allowing for full regulatory flexibility. This document does not provide such tables for partial EPB requirements (related to the fabric or technical buildings systems), as this is dealt with in other documents. The overall and partial EPB indicators, i.e. the quantitative output of EPB assessments, can be used for different purposes: 1) Requirements: to set public or private requirements regarding the energy performance of buildings. 2) Decisions: to facilitate decisions or actions in the private or public domain. 3) Information and communication: for building designers, owners, operators, users, policy makers and citizens (as sellers or renters, as prospective buyers or tenants).

Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects and application to the overall energy performance (ISO 52003-1:2017); German version EN ISO 52003-1:2017

ISO 18523-2:2018 建筑的能源性能.为计算能源的建筑,区域和空间使用计划和条件.第2部分: 住宅建筑

This document specifies the formats to present the schedule and conditions of zone and space usage (referred to as input data of energy calculations) for residential buildings. The schedule and conditions include schedules of occupancy, operation of technical building systems, ventilation rates, hot water usage, usage of appliances and internal heat gains due to occupancy, lighting and appliances. The schedule and conditions for lighting are applicable to fixed installed lighting fixtures. This document also gives categories of residential building, zone and space according to differentiating schedule and condition. For residential buildings or its housing units which contain any category of space or zone of non-residential buildings, ISO 18523-1 applies. Depending on necessary minuteness of the energy calculation, different levels of schedule and condition from the view point of time and space averaging are specified. The values and categories for the schedule and condition are included informatively. NOTE The schedule and condition in this document is basically different from assumptions in order to determine the size of technical building systems in the process of design, where possible largest or smallest values are assumed. Instead, most usual and average values, which are assumed for the building energy calculation, are dealt with in this document.

Energy performance of buildings - Schedule and condition of building, zone and space usage for energy calculation - Part 2: Residential buildings

DIN EN ISO 52022-1:2018 建筑物能源性能.建筑物组件和构件的热,太阳光和日光性能.第1部分:玻璃装配遮阳装置太阳光和日光特征的简化计算方法(ISO 52022-1-2017);德文版本EN ISO 52022-1-2017

This European Standard specifies a simplified method based on the thermal transmittance and total solar energy transmittance of the glazing and on the light transmittance and reflectance of the solar protection device to estimate the total solar energy transmittance of a solar protection device combined with glazing. This document is applicable to all types of solar protection devices parallel to the glazing such as louvre, venetian or roller blinds. The position of the solar protection device can be interior, exterior or between single panes in a dual glazing system. It is applicable when the total solar energy transmittance of the glazing is between 0,15 and 0,85. Venetian or louvre blinds are assumed to be adjusted so that there is no direct solar penetration. It is assumed that for external solar protection devices and for integrated solar protection devices, the space between the solar protection devices and the glazing is unventilated and for internal solar protection devices this space is ventilated.

Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:

DIN 4109-1:2018-01 建筑物隔声. 第1部分: 最低要求

In this standard requirements of building components regarding the sound insulation in areas in need of protection and to the allowed sound levels in rooms needing protection in residential and non-residential buildings to achieve the described protection objectives of sound insulation are specified.

Sound insulation in buildings - Part 1: Minimum requirements

JIS A 1423:2017 用红外线辐射计测定正常辐射率的简化试验方法

Simplified test method for normal emissivity by infrared radiation thermometer

BS EN ISO 12631:2017 幕墙的热工性能 热传导率的计算

Thermal performance of curtain walling. Calculation of thermal transmittance

DIN EN ISO 12354-2:2017 建筑声学.根据元件性能评估建筑物声学性能.第2部分:房间冲击声隔绝(ISO 12354-2-2017);德文版本EN ISO 12354-2-2017

This document specifies calculation models designed to estimate the impact sound insulation between rooms in buildings, primarily using measured data which characterize direct or indirect flanking transmission by the participating building elements and theoretically-derived methods of sound propagation in structural elements.

Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO 12354-2:2017); German version EN ISO 12354-2:2017

DIN EN ISO 12354-1:2017 建筑声学.根据元件性能评定建筑物声学性能.第1部分:房间之间对气载声音的隔绝(ISO 12354-1-2017);德文版本EN ISO 12354-1-2017

This document specifies calculation models designed to estimate the airborne sound insulation between adjacent rooms in buildings, primarily using measured data which characterize direct or indirect flanking transmission by the participating building elements, and theoretically-derived methods of sound propagation in structural elements.

Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017); German version EN ISO 12354-1:2017

BS PD CEN ISO/TR 52003-2:2017 建筑物能源性能. 指标, 要求, 评级和证书. 第2部分: ISO 52003-1的解释和理由

Energy performance of buildings. Indicators, requirements, ratings and certificates. Explanation and justification of ISO 52003-1

BS EN ISO 12569:2017 建筑物和材料的热性能 建筑物内比气流率的测定 示踪气体稀释法

Thermal performance of buildings and materials. Determination of specific airflow rate in buildings. Tracer gas dilution method

ISO 16283-1:2014/Amd 1:2017 声学. 建筑和建筑构件隔声的实验室测量. 第1部分: 气载声隔音.修改件1

Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation; Amendment 1

JG/T 530-2017 导光管采光装置

Light pipe lighting device

BS PD CEN ISO/TR 52000-2:2017 建筑物能源性能.首要EPB评定.第2部分:ISO 52000-1的解释和理由

Energy performance of buildings. Overarching EPB assessment. Explanation and justification of ISO 52000-1

BS EN ISO 12354-4:2017 建筑声学.根据元件性能评定建筑物声学性能.室内到室外的声音传播

Building acoustics. Estimation of acoustic performance of buildings from the performance of elements. Transmission of indoor sound to the outside