P34 工业建筑工程 标准查询与下载

JGJ 312-2013 医疗建筑电气设计规范

Code for electrical design of medical buildings

SJ/T 11448-2013 软件园区规划设计规范

本规范适用于新建、改建、扩建软件园项目的规划设计。本规范适用于建设用地规模为200公顷以内的园区。

Code of Software Park Planning & Design

DIN EN ISO 15189:2013 医学实验室.质量和资格要求(ISO 15189-2012).德文版本EN ISO 15189-2012

Medical laboratories - Requirements for quality and competence (ISO 15189:2012); German version EN ISO 15189:2012

DIN EN 13121-3 Berichtigung 1:2012 地上用GRP槽罐和容器.第3部分:设计和工艺.德文版本EN 13121-3-2008+A1-2010, DIN EN 13121-3-2010-06的技术勘误表.德文版本EN 13121-3-2008+A1-2010/AC-2011

GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German version EN 13121-3:2008+A1:2010, Corrigendum to DIN EN 13121-3:2010-06; German version EN 13121-3:2008+A1:2010/AC:2011

ANSI/ASAE EP403.4-2011 用于动物废物管理的厌氧贮留池设计

Design of Anaerobic Lagoons for Animal Waste Management

KS J 0012-2010 二级(层流)生物安全柜

이 표준은 생물안전 등급 1, 2, 3이나 4에 해당되는 물질을 처리하는 작업에서 유래하는

Class II(laminar flow) biosafety cabinetry

DIN EN 13121-3:2010 地上用GRP槽罐和容器.第3部分:设计和工艺.德文版本EN 13121-3-2008+A1-2010

GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German version EN 13121-3:2008+A1:2010

建标 125-2009 烟花爆竹批发仓库建设标准

本建设标准适用于新建烟花爆竹批发仓库的建设，不适用于烟花爆竹半成品和原材料储存仓库的建设，改建和扩建烟花爆竹批发仓库可参照执行。

Construction Standards for Fireworks and Firecrackers Wholesale Warehouses

NF T35-007/IN1:2009 涂覆车间混合室安全要求

Coating plants - Combined booths - Safety requirements.

NF T35-007:2009 涂覆车间.混合室.安全要求

Coating plants - Combined booths - Safety requirements.

建标 119-2009 石油储备库工程项目建设标准

本建设标准适用于储存原油的地上石油储备库和地下水封石洞石油储备库工程的建设，不适用于盐穴、天然石洞等其他形式的石油储备库工程建设。

Construction standards for oil reserve depot engineering projects

EN 13355:2004+A1:2009 涂覆车间.混合室.安全要求

This document is applicable to combined booths for the application of organic liquid coating materials by an operator with maximum drying temperature of 100 °C and deals with all hazards significant for combined booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). To the extent of this document, a combined booth is considered an assembly of the following equipment: forced ventilation by one or more fans, ventilation air heating system (e. g. heat exchanger or burner), power driven dampers, forced ventilation ducting, dry air filtering and/or wet air washing systems, automatic fire extinguishing equipment and additional specific electrical equipment, control and power circuits joined together for the spraying and drying process of liquid coating material in a space totally enclosed provided with forced ventilation, working pit, in special case. This document does not cover: a) booths for automatic spraying, powder spray booths, open booths, and portable heaters; b) design of the building foundations upon which a booth is installed; c) the civil engineering and building design where a booth is constructed as, or to use part of, a new or existing building; d) spraying equipment (see EN 1953), automatic devices for spraying systems like robots (see EN 775) or reciprocators or similar systems, conveyors, lifts and continuous handling equipment and systems (see EN 619). This document is not applicable to combined booths which are manufactured before the date of publication of this standard by CEN.

Coating plants - Combined booths - Safety requirements

建标 233-2008 煤炭工程项目建设用地指标

本建设用地指标适用于煤炭工业工程项目的矿井、选煤厂、筛选厂和矿区行政设施、辅助企业及设施工程新建顶目。改建、扩建及技术改造工程也可参照执行。

Land use indicators for coal engineering projects

DIN EN 13121-3:2008 地上用GRP槽罐和容器.第3部分:设计和工作质量

This European Standard gives requirements for the design, fabrication, inspection, testing and verification of GRP tanks and vessels with or without Thermoplastics lining for storage or processing of fluids, factory made or site built, non pressurised or pressurised up to 10 bar, for use above ground. The terms vessels and tanks as used in this European Standard include branches up to the point of connection to pipe work or other equipment by bolting and supports, brackets or other attachments bonded directly to the shell. In addition to the definitive requirements, this European Standard also requires the items in Clause 5 to be fully documented. This European Standard covers vessels and tanks subject to temperatures between - 40 ℃ and + 120 ℃. NOTE It is possible that future advances in resin technology would allow tanks and vessels to be considered for operating temperatures above + 120 ℃. Should such a situation arise and a manufacturer wishes to take advantage of such developments, then all other requirements of the standard shall be maintained and such tanks and vessels shall only be designed in accordance with the advanced design method given in 7.8.3. Excluded from this European Standard are: -- tanks and vessels for the transport of fluids; -- underground storage tanks; -- spherical vessels; -- vessels and tanks of irregular shape; -- tanks and vessels with double containment; -- tanks and vessels which are subject to the risk of explosion, or failure of which may cause an emission of radioactivity; -- specification for fibre reinforced cisterns of one piece and sectional construction for the storage, above ground, of cold water (see EN 13280:2001).

GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German version EN 13121-3:2008

KS J 1009-2008 生物产业分类代码

이 규격은 바이오산업에 해당하는 업종 가운데 현재 바이오산업에서 이용되고 있는 업종과 가까

Bioindustry classification code

GOST R 53239-2008 烃类地下储存库.建造和操作用监控规则

Underground storages of hydrocarbons. Monitoring rules for construction and operation

KS J 0009-2007 生命工程技术.通过聚合酶链反应(PCR)技术的核酸序列检出标准指南

1.1 이 지침은 핵산 서열의 증폭과 검출에 대한 PCR 절차 및 특정 절차의 개발, 이용

Biotechnology－Standard guide for detection of nucleic acid sequence by the polymerase chain reaction techniquesequence by the polymerase chain reaction technique

KS J 3021-2007 生命工程技术.包括病毒在内的转基因变形微生物的有意释放控制指南

이 규격은 유전자변형 미생물에 대한 모니터링 전략의 설계, 개발, 수행의 적합성과 유효성을

Biotechnology－Guidance for the monitoring strategies for deliberate releases of genetically modified micro－organisms, including viruses

KS J 3022-2007 生命工程技术.包括病毒在内的转基因变形微生物的有意释放取样指南

이 규격은 환경으로 방출된 유전자변형 미생물의 모니터링 전략의 목적을 달성하기 위해 유효한

Biotechnology－Guidance for the sampling strategies for deliberate releases for genetically modified micro－organisms, including viruses

KS J 0010-2007 生命工程技术.细菌、霉、原生生物、病毒、遗传因子及动植物组织的冻结、冻结干燥及低温保全标准实施规范

1.1 이 실행 규범은 냉동 과정과 이후의, 그리고 초저온 보관 중인 미생물(세균, 곰팡이

Biotechnology－Standard practice for preservation by freezing,freeze－drying, and low temperature maintenance of bacteria, fungi,protista, viruses, genetic elements, and animal and plant tissues