P34 工业建筑工程 标准查询与下载

KS J 0005-2007 生命工程技术.对基因变形植物有意释放的控制指南

이 규격은 유전자변형 식물에 대한 모니터링 전략의 설계, 개발 그리고 수행의 적합성과 유효

Biotechnology－Guidance for the monitoring strategies for deliberate releases of genetically modified plants

KS J 0004-2007 生命工程技术.对基因变形植物有意释放的采样指南

이 규격은 유전자변형 식물의 모니터링 전략을 달성할 수 있는 유효한 시료채취 전략을 수립하

Biotechnology－Guidance for the sampling strategies for deliberate releases of genetically modified plantsdeliberate releases of genetically modified plants

KS J 0008-2007 生命工程技术.通过基因体变形分析、探究基因变形生物体特性指南

이 규격은 관심 대상 유전자변형의 분석 과정에서 따라야 할 단계에 대해 지침을 제공한다.

Biotechnology－Guidance for the characterization of the genetically modified organism by analysis of the genomic modificationmodified organism by analysis of the genomic modification

KS J 0006-2007 生命工程技术.通过基因体变形的功能体现分析、探究基因变形生物体特性指南

이 규격은 관심 대상 유전체변형의 기능 발현에 대한 분석을 위한 실험의 설계와 수행에 관한

Biotechnology－Guidance for the characterization of the genetically modified organisms by analysis of the functional expression of the genomic modification

KS J 0007-2007 生命工程技术.通过基因体变形的分子的稳定性分析、探究基因变形生物体特性指南

이 규격은 생명 주기, 유전성 그리고 외부적 요인을 고려한 유전체변형의 분자적 안정성 분석

Biotechnology－Guidance for the characterization of the genetically modified organism by analysis of the molecular stability of the genomic modification

SH/T 3521-2007 石油化工仪表工程施工技术规程

本规程规定了石油化工自动化仪表工程施工的技术要求。 本规程适用于石油化工新建、扩建工程的自动化仪表工程的施工。改建工程可参照执行。

Technical specincation for construction of instrumentation engineering in petrochemical industry

ASHRAE APP IP CH 14-2007 实验室

MODERN laboratories require regulated temperature, humid- ity, relative static pressure, air motion, air cleanliness, sound, and exhaust. This chapter addresses biological, chemical, animal, and physical laboratories. Within these generic categories, some laboratories have unique requirements. This chapter provides an overview of the HVAC characteristics and design criteria for laboratories, including a brief overview of architectural and utility concerns. This chapter does not cover pilot plants, which are essentially small manufacturing units.

Laboratories

ASHRAE DA-07-032-2007 灰泥墙集会对住宅窗安装方法的实验室评估

THIS chapter discusses HVAC systems for industrial facilities for the production of process heat and power and for electrical generating stations. Not every type of power plant is specifically covered, but the process areas addressed normally correspond to similar process areas in any plant. For example, wood-fired boilers are not specifically discussed, but the requirements for coal-fired boilers generally apply.

Laboratory Evaluation of Residential Window Installation Methods on Stucco Wall Assemblies

KS J 0013-2006 生命工程装备的泄露试验顺序指南书

이 규격은 생물공학 공정에 사용되는 장비(장비 자체 및 그의 부품)의 미생물 누설에 대한

Biotechnology-equipment－Guidance on testing procedures for leaktightness

ASHRAE CH-06-11-2-2006 实验室的破冰球贮存冷却系统

An Ice-Ball Storage Cooling System for a Laboratory Complex

An Ice-Ball Storage Cooling System for a Laboratory Complex

DIN EN 13069:2005 烟囱.系统烟囱用粘土/陶瓷外壁.要求和试验方法；德文版本 EN 13069-2005

This standard is a product specification for clay/ceramic chimney outer wall elements with solid walls or walls with vertical perforations. When they are installed, they will form the outer walls of system chimneys which serve to convey products of combustion from fireplaces or heating appliances to the atmosphere under negative or positive pressure. This standard specifies the performance requirements for factory-made clay/ceramic chimney outer wall elements. Testing,CE- marking and inspection requirements are covered by this standard.

Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods; English version of DIN EN 13069:2005

HG/T 21510-2005 橡胶工厂初步设计文件内容深度规定

本标准规定了橡胶工厂初步设计的工厂概况、设计依据、设计指导思想以及设计范围与分工。

Specification on content and procedure of preliminary design file for rubber plant

DIN EN 13121-4:2005 地上用GRP槽罐和容器.第4部分:交付、安装和维修

GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance; German version EN 13121-4:2005

BS EN 14015:2004 在室温和高于室温下液体储存用现场建造的立式、圆柱形、平底、地上用焊接钢罐的设计和制造规范

1 This document specifies the requirements for the materials, design, fabrication, erection, testing and inspection of site built, vertical, cylindrical, flat bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperatures and above, and the technical agreements that need to be reached (see Annex A). This document does not apply to tanks where the product is refrigerated to maintain it as a liquid at atmospheric pressure (see prEN 14620). This document is concerned with the structural integrity of the basic tank structure and does not provide requirements for considering process design, operational issues, safety and firefighting facilities, in-service inspection, maintenance or repair. These aspects are covered in detail in other Codes of Practice (see Annex B). 2 This document applies to closed-top tanks, with and without internal floating covers (see Annex C) and open-top tanks, with and without floating roofs (see Annexes D and E). It does not apply to 'lift-type' gas holders. 3 This document applies to storage tanks with the following characteristics: a) design pressure less than 500 mbar and design internal negative pressure not lower than 20 mbar (see 5.1 for pressure limitations); b) design metal temperature not lower than -40 ℃ and not higher than +300 ℃ (see 5.2.2); c) maximum design liquid level not higher than the top of the cylindrical shell. 4 The limits of application of this document terminate at the following locations. — face of the first flange in a bolted flange connection; — first threaded joint on the pipe or coupling outside of the tank shell, roof or bottom; — first circumferential joint in a pipe not having a flange connection. 5 This document is applicable to steel tanks with a maximum design strength ≤ 260 N/mm. 6 In addition to the definitive requirements, this document also requires the items detailed in Annex A to be documented. For compliance with this document, both the definitive requirements and those required in Clause 4 have to be satisfied. note:1) All pressures are in mbar gauge unless otherwise stated.

Specification for the design and manufacture of site built,vertical,cylindrical,flat-bottomed,above ground,welded,steel tanks for the storage of liquids at ambient temperature and above

DB61/T 340~346-2004 无公害绞股蓝标准综合体

本标准适用于无公害绞股蓝产地选择和建立

Pollution-free Gynostemma pentaphylla standard complex

DIN EN 13121-2:2004 地上用GRP槽罐和容器.第2部分:复合材料.耐化学性

This European Standard gives requirements for chemical resistance of composite materials used for GRP tanks and vessels for storage or processing of fluids, for use above ground. The tanks or vessels may be factory made or site built, with or without lining.

GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance; German version EN 13121-2:2003

KS J 0011-2003 生命工程技术.噬菌体M13及DNA识别指南

1.1 이 규격은 생명 공학 기술에 사용되는 박테리오파지 M13의 식별에 대하여 적용한

Biotechnology－Guide for identification of bacteriophage M13 and its DNA

DIN EN 13121-1:2003 地上用GRP槽罐和容器.第1部分:原材料.技术条件和验收条件

GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions; German version EN 13121-1:2003

JT/T 491-2003 港口基本建设(技术改造)工程项目设计能源综合单耗评价

本标准规定了装卸生产设计能源综合单耗及装卸生产设计可比能源综合单耗定义、计算方法和评价标准。 本标准适用于全国沿海港口、内河港口基本建设(技术改造)工程项目可行性研究设计阶段，初步设计阶段亦可参照执行。

Evaluation of design comprehensive unit energy consumption in port capital construction(technical innovation)projects

ANSI/ASAE EP406.4-2003 暖房的加热、通风和制冷

This Engineering Practice presents design information for heating, ventilating and cooling greenhouses. Generally accepted methods of heating, ventilating and cooling are presented and the important design features of typical systems are indicated.

Heating, Ventilating, and Cooling Greenhouses