Q18 装修材料 标准查询与下载

EN 438-1:2016 高压层压装饰制品(HPL).外表基于热固性树脂(通常称为层压制品),第1部分:简介和一般信息

This part of EN 438 gives an overview of the standard, and provides guidance in the selection and application of test methods and specifications contained in EN 438-2, EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-7, EN 438-8 and EN 438-9. This European Standard is applicable to high-pressure decorative laminate(s) (HPL) produced by using a high pressure process.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information

EN 438-2:2016 高压层压装饰制品(HPL).外表基于热固性树脂(通常称为层压制品),第2部分:确定的属性

This European Standard specifies the methods of test for determination of the properties of high-pressure decorative laminates as defined in Clause 3. These methods are primarily intended for testing the sheets specified in EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-8, and EN 438-9. The precision of the test methods, specified in this European Standard, is not known because inter-laboratory data are not yet available. When inter-laboratory data will be obtained, precision statements will be added to the test method at the following revision. For those test methods having an end point determination based on subjective judgement, it is not meaningful to make a statement of precision.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties

EN 438-4:2016 高压层压装饰制品(HPL).外表基于热固性树脂(通常称为层压制品),第4部分:分类和分层的厚度大于2毫米和更大

This European Standard specifies performance requirements for two types of compact laminate of thickness 2 mm or greater produced by using a high pressure process intended for interior use. High-pressure decorative Compact laminates are characterised by their aesthetic qualities, strength, durability and functional performance. Compact HPL sheets are available in a wide variety of colours, patterns and surface finishes; they are extremely strong, and resistant to wear, impact, scratching, moisture, heat and staining; and possess good hygienic and anti-static properties, being easy to clean and maintain. EN 438-2 specifies the methods of test relevant to this European Standard.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater

EN 438-3:2016 高压层压装饰制品(HPL).外表基于热固性树脂(通常称为层压制品),第3部分:分类和分层要求小于2毫米厚用于支撑基板

This European Standard applies to laminates less than 2 mm thick produced by using an high pressure process, normally intended for bonding to supporting substrates to produce HPL composite panels and establishes a classification system for high-pressure decorative laminates according to their performance and main recommended fields of application, including materials with special characteristics, for example formability or defined reaction to fire. This European Standard also specifies requirements for the properties of the various types of laminates covered by this classification system. High-pressure decorative laminates are characterised by their qualities, durability and functional performance. HPL sheets are available in a wide variety of colours, patterns and surface finishes; they are resistant to wear, scratching, impact, moisture, heat and staining; and possess good hygienic and anti-static properties, being easy to clean and maintain. EN 438-2 specifies the methods of test relevant to this European Standard. EN 438-4, EN 438-5, EN 438-6, EN 438-7, EN 438-8 and EN 438-9 are reserved for special types of HPL materials.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates

EN 438-5:2016 高压层压装饰制品(HPL).外表基于热固性树脂(通常称为层压制品),第5部分:分类和分层厚度小于2毫米用于支撑基板

This European Standard applies to six classes of flooring grade laminates less than 2 mm thick produced by using a high pressure process, intended for bonding to supporting substrates, to produce HPL flooring elements. For laminate floor covering applications they meet the surface property requirements specified in EN 13329. High-pressure decorative flooring laminates are characterised by their high resistance to abrasion, aesthetic qualities and durability. They have good hygienic and anti-static properties and are easy to clean and maintain. The requirements in this document apply only to the high-pressure laminate, and additional properties will need to be specified in order to define the functional performance of the finished flooring product. This European Standard applies only to decorative laminates as defined in Clause 3. EN 438-2 specifies the methods of test relevant to this European Standard.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates

NF P62-307:2015 弹性地板覆盖物.用于特别潮湿地区的聚氯乙烯地板覆盖物

Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification

DIN EN 16153:2015 屋顶、墙壁和天花板的内外部用光传输平面多层聚碳酸酯(PC)薄板.试验方法和要求.德文版本EN 16153-2013+A1-2015

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods; German version EN 16153:2013+A1:2015

EN 13830:2015 幕墙.产品标准

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances. The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it. This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit. This standard is applicable to the whole of the curtain walling kits, including the fixings. Curtain walling according to this standard is intended to be used as part of the building envelope. This European Standard does not include: - "Patent glazing" (glazed sloping roofs) kits; - Roof glazing constructions; - Façades made of precast concrete panels as part of the wall (see EN 14992). NOTE 1 Precast concrete panels may be used in curtain walling kits as infill panels. NOTE 2 Durability of structural sealed glazing infills is not covered by this standard.

Curtain walling - Product standard

JIS A 1460:2015 建筑板材甲醛排放的测定. 干燥器法

Determination of the emission of formaldehyde from building boards -- Desiccator method

DB21/T 2447-2015 无卤阻燃木塑地板工程技术规程

Halogen-free flame-retardant wood-plastic floor engineering technical regulations

JIS A 6921 ERRATUM 1:2015 勘误

ERRATUM

BS 8605-1:2014 外部木材包层. 指定方法

This part of BS 8605 describes methods of specifying the characteristics of external timber cladding products from which selection has to be made and for which values might have to be agreed between the purchaser and manufacturer. This part of BS 8605 complements harmonized standards BS EN 14915 and BS EN 13986. It lists all performance requirements that might apply to external timber cladding in the UK and provides a method of specifying those requirements that are outside the scope of those standards,but which are relevant to the UK's climate and construction practices.

External timber cladding. Method of specifying

JG/T 463-2014 建筑装饰用人造石英石板

本标准规定了建筑装饰用人造石英石板的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存及随行文件。本标准适用于工业与民用建筑墙面、地面和台面装饰用人造石英石板。

Agglomerated quartz slab for building decoration

JGJ/T 287-2014 建筑反射隔热涂料节能检测标准

本标准适用于新建、扩建及既有建筑墙面、屋面的建筑反射隔热涂料节能性能参数的检测。

Standard for energy efficiency test of solar heat reflecting insulation coatings of buildings

NF P61-534-4:2014 瓷砖.第4部分:断裂强度及破裂模数的测定

La présente partie de l'ISO 10545 spécifie une méthode d'essai pour la détermination de la résistance à la flexion et la force de rupture pour tous les carreaux et dalles céramiques.

Ceramic tiles - Part 4 : determination of modulus of rupture and breaking strength

JIS A 6916:2014 饰面用表面处理材料

Surface preparation materials for finishing

JIS A 6921:2014 装修用壁纸和墙面涂料

Wallpaper and wallcoverings for decorative finish

JIS A 6909:2014 建筑物纹理精整用涂层材料

Coating materials for textured finishes of buildings

JC/T 2229-2014 建筑用金属及金属复合材料 大气环境暴露试验方法

本标准规定了建筑用金属及金属复合材料大气环境暴露试验方法的术语和定义、暴露试验场、试样、试验步骤、试验终止、试验结果及试验报告。本标准适用于评价建筑用金属及金属复合材料在大气环境条件下的性能和变化。相关产品可参照本标准。

Method for atmospheric corrosion tests on metal and metal-composite product on architecture

JC/T 2223-2014 室内装饰装修用木塑型材

本标准规定了室内装饰装修用木塑复合型材(以下简称木塑型材)的分类与标记、要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于室内装饰装修非结构用木塑型材。

Wood-plastic composite profiles for interior decoration