Q18 装修材料 标准查询与下载

JC/T 2224-2014 室外装饰用木塑墙板

本标准规定了室外装饰用木塑墙板的分类和标记、要求、检验方法、检验规则以及标志、包装、运输和贮存。本标准适用于室外装饰用非结构性木塑墙板。

Wood-plastic composite cladding panels for exterior decorate

JC/T 2219-2014 改性无机粉复合建筑饰面片材

本标准规定了改性无机粉复合建筑饰面片材的术语和定义、分类和标记、要求、试验方法、检验规则以及包装、标志、运输和贮存等。本标准适用于工业与民用建筑室内外墙面、地面及屋面装饰装修用的改性无机粉复合建筑饰面片材。

Modified inorganic powder composite building decoration material

EN 13964:2014 吊顶.要求及测试方法

This European Standard covers membranes, individual substructure components, substructure kits and suspended ceiling kits intended to be placed on the market. It covers suspended ceilings sold as a complete kit, substructures placed on the market as kits, individual components (products) of such substructures, and membrane components. It includes test methods and methods of assessment, as well as provisions for the evaluation of conformity and for the marking of the products to the requirements of this European Standard. In the absence of any other European Standard, this European Standard specifies dimensions, tolerances and, where relevant, performance requirements, for commonly available ceiling substructures and membrane components. This European Standard covers the following characteristics: reaction to fire; fire resistance (suspended ceiling kits only); release and/or content of dangerous substances: release of asbestos (content) (suspended ceiling kits and membrane components only); release of formaldehyde (suspended ceiling kits and membrane components only); other dangerous substances; shatter properties (safe breakage)/impact resistance (for suspended ceiling kits and membrane components of brittle materials in suspended ceiling kits only); flexural tensile strength; load bearing capacity, tolerances and dimensions; electrical safety (as adequacy of the product to avoid electrocution from installations that may be part of the assembled ceiling, using electricity, such as ventilation devices and lighting); direct airborne sound insulation (suspended ceiling kits only); sound absorption (suspended ceiling kits and membrane components only); thermal conductivity (suspended ceiling kits and membrane components only); susceptibility to the growth of harmful micro-organisms; resistance to fixings (relevant for components that are mechanically fixed); durability of flexural tensile strength and load bearing capacity against moisture.

Suspended ceilings - Requirements and test methods

DIN EN 14915:2013 实心木质镶板和贴面层.特性、合格评定和标记.德文版本EN 14915-2013

Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking; German version EN 14915:2013

PD CEN/TS 16354:2013 强化地板.垫层.规格,要求和试验方法

This Technical Specification specifies test methods for the determination of the technical characteristics of underlays under laminate floor coverings. It includes minimum performance requirements for the underlay-flooring system to give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging. Underlays pre-attached to the laminate flooring coverings are not covered by this Technical Specification. Underlays for laminate floor coverings intended for use in electrostatically sensitive areas like computer rooms, etc., are not covered by this Technical Specification.

Laminate floor coverings - Underlays - Specification@ requirements and test methods

KS F 2605-2013 建筑内部板材耐潮性能试验方法

이 표준은 건축용 내장 보드류1)의 온도ㆍ습도2)가 일정 또는 비교적 고온도에서 온도ㆍ습도가 변동하는 환경하에서의 내습성3)을 평가하는 시험방법에 대하여 규정한다.

Test methods for moisture resisrance of board for interior system of building

QB/T 4518-2013 装饰门用附属配件

本标准规定了装饰门用附属配件的术语和定义、分类、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于门锁、门吸、门顶、顺位器、指示牌(插销)、门视器、弹珠锭、防盗链(扣)、门底自动密封条、滑轮、吊轮、导轨、合页、铰链、地弹簧、闭门器、玻璃门铰、玻璃门夹、门插销、防尘筒、门拉手等装饰门用附属配件。

Accessory for decoration door

EN 14915:2013 实心木质镶板和覆层.特性,合格评定和标记

This European Standard defines and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for solid wood products to be used as panelling and cladding (including siding) for: wall and ceiling panelling for internal use, wall and ceiling cladding for external uses. It provides for the evaluation of conformity and the requirements for marking these products. This European Standard does not cover panels intended for use as stiffening elements. This European Standard does not cover suspended ceiling in wood panelling and cladding. This European Standard does not cover the processes for treatment, surface coating or modification. This European standard does not cover products which are produced from laminated layer section. This European Standard covers treated, untreated and surface coated products, including those made of thermally or chemically modified wood, as well as finger jointed and edge glued products. NOTE Prescriptions for surface coating and treatment can be found in documents valid in the place of use. This European Standard covers products in compliance with EN 14519, EN 15146 and EN 14951, and other solid timber products manufactured for use as panelling and cladding.

Solid wood panelling and cladding - Characteristics@ evaluation of conformity and marking

NF P74-201-2:2013 建筑工程.薄、半厚、厚漆涂料.第2部分:技术模型条款的承包标书

Building works - Thin, semi-thick, thick paint coatings - Part 2: contract bill of technical model clauses

NF P74-201-1-2:2013 建筑工程.薄、半厚、厚漆涂料.第1-2部分:材料选择的通用标准

Building works - Thin, semi-thick, thick paint coatings - Part 1-2 : general criteria for choice of materials

DIN EN 16153:2013 屋顶、墙壁和天花板的内外部用光传输平面多层聚碳酸酯(PC)薄板.试验方法和要求.德文版本EN 16153-2013

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods; German version EN 16153:2013

BS EN 16153:2013 屋顶、墙壁和天花板的内外部用光传输平面多层聚碳酸酯(PC)薄板.试验方法和要求

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods

JC/T 2183-2013 铜塑复合板

本标准规定了铜塑复合板(以下简称铜塑板)的术语和定义、分类、规格尺寸和标记、材料、要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于建筑幕墙和室内外装饰用铜塑板。

Copper-plastic composite panel

JC/T 2184-2013 建筑用透光装饰板

本标准规定了建筑用透光装饰板(简称透光板)的术语和定义、分类、规格和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于建筑装饰装修用透光板。

Translucent decorate material for building

JC/T 2185-2013 艺术浇注石

本标准规定了艺术浇注石的术语和定义、分类、代号和标记、要求、试验方法、检验规则以及标志、包装、运输、贮存和随行文件等。本标准适用于建筑墙面、人行地面、庭院和园林装饰用产品。

Architectural cast stone

JC/T 2187-2013 铝波纹芯复合铝板

本标准规定了铝波纹芯复合铝板的术语和定义、分类、规格尺寸及标记、材料、要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于建筑幕墙及普通装饰用途的铝波纹芯复合铝板。

Aluminium corrugated composite panel

NF B54-040/A1:2013 木地板装饰型材.规格

Wood profiles for floor decking - Specifications

NF T54-370-3:2013 塑料.实心表面处理用装饰材料.第3部分:性能测定.实心材料表面形状

Plastics - Decorative solid surfacing materials - Part 3: determination of properties - Solid surface shapes

EN 16153:2013 屋顶,墙壁和天花板的内外部用光传输平面多层聚碳酸酯(PC)薄板.要求和试验方法

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods (Incorporates Amendment A1: 2015)

SN/T 3366-2012 室内装饰装修用涂料中可溶性汞、砷、硒、锑的测定 原子荧光光谱法

本标准规定了室内装饰装修涂料中可溶性汞、砷、硒、锑的原子荧光光谱测定法。本标准适用于室内装饰装修涂料中可溶性汞、砷、硒、锑的测定，本方法的检测下限：可溶性汞0.15 mg/kg，可溶性砷 0.40 mg/kg，溶性硒 0.30 mg/kg，溶性锑 0.40 mg/kg。

Determination of soluble mercury,arsenic,selenium,antimony in indoor decorating and refurbishing coatings.Atomic fluorescence spectrometric method