Q22 建筑用塑料制品 标准查询与下载

KS F 2807-2001 空气调节器换气设备的风量测量方法

이 규격은 공기 조화ㆍ환기 설비의 분출구 및 흡입구에서의 풍량을 현장에서 측정하는 방법에

Method of measurement of air quantity for ventilation and air conditioning system

KS F 2806-2000 地弹簧门的地弹簧和合页试验方法

이 규격은 금속제 용수철과 완충유의 조합 작용으로, 도어가 자동적으로 닫히는 플로어 힌지

Testing methods for checking floor-hinges and door-closers

NF P98-260-1:2000 路面试验.沥青混合物流变特性测量.第1部分:用拉伸试验测定非直线性和成模性

Test relating to pavements - Measurements of rheological properties on bituminous mixtures - Part 1 : determination of the modulus and of the lost linearity under direct traction (tensile test).

NF P98-134:2000 沥青混合料.行车路面层:多孔沥青.定义.分类.特性.生产.铺设

Bituminous mixes - Wearing courses : porous asphalts - Definition - Classification - Characteristics - Manufacturing - Laying.

JC/T 858-2000 住宅浴缸和淋浴底盘用浇铸丙烯酸板材

Cast acrylic sheet for residential bathtubs and shower trays

GSA A-A-3139 ADMIN CHG NOTICE 1-2000 弹性地板粘合剂(水基)

Commercial Item Description, A-A-3 I39 doted March 3,1998, needs the IMPROVEMENT BLOCK corrected asshown below:

ADHESIVE, RESILIENT FLOORING, (WATER-BASED)

ASTM D4216-00e1 刚性聚氯乙烯(PVC)和相关聚氯乙烯(PVC)及氯化聚氯乙烯(CPVC)建筑制品化合物的标准规范

1.1 This specification covers rigid plastic PVC and CPVC Exterior compounds composed of poly(vinyl chloride), chlorinated poly(vinyl chloride), vinyl chloride copolymers or vinyl chloride blends, and the necessary compound ingredients intended for use in making building products. The compounding ingredients may consist of lubricants, stabilizers, nonpoly(vinyl chloride) resin modifiers, colorants or pigments, or both, and inorganic fillers.1.2 This specification is intended to provide classification of base compounds used to manufacture PVC and CPVC exterior building products. Physical properties may be determined by evaluating compounds of any color. Note 18212;Two year weathering studies, without specific requirements for color change and physical property change, are recommended for all colors of new compounds and compounds for new applications to provide the basis for agreement between producer and buyer on the suitability of the compound for the intended application. 1.3 The requirements in this specification are intended for qualification, as well as for quality control of compounds used to manufacture building products. They are not applicable to finished building products. See Specifications D 3679 D 4477, D 4726, and F 964 for requirements for finished products. 1.4 It may be necessary, in special cases, to select specific compounds for unusual applications that require consideration of other properties not covered in this specification. 1.5 The rate of burning test, Test Method D 635, is used in this specification only as a screening test for identification of certain properties of the PVC compound; there is no flammability test or flammability requirement for the compound. 1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.7 The following safety hazards caveat pertains only to the test methods portion, Section 11, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 28212;There are no ISO standards covering the primary subject matter of this specification. 1.8 The text of this standard references notes and footnotes, which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.9 Rigid PVC recycle plastic meeting the requirements of this specification may be usable in some applications. Refer to the specific requirements in the Materials and Manufacture Section of the applicable product standard.

Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds

JIS A 1415:1999 聚合物建筑材料暴露于试验室光源的方法

この規格は，高分子系建築材料でプラスチック及び/又はエラストマーからなる材料を対象とした実験室光源(キセノンアーク光源，紫外線蛍光ランプ，オープンフレームカーボンアークランプ及び紫外線カーボンアークランプ)による暴露試験方法について規定する。

Methods of exposure to laboratory light sources for polymeric material of buildings

DLA A-A-59412-1999 地板安装旋转型锻机 取代 DLA MIL-S-80035 C CANC公告1,DLA MIL-S-80035 C,DLA MIL-S-80035 B,DLA MIL-S-80035 A,DLA MIL-S-80035

This commercial item description (CID) covers floor-mounted rotary swaging machines and accessories intended for use in pointing, reducing diameters, and forming shapes on tubing and solid stock and swaging fittings to cables and hoses.

SWAGING MACHINE, ROTARY, FLOOR-MOUNTED [Superseded: DLA MIL-S-80035 C CANC NOTICE 1, DLA MIL-S-80035 C, DLA MIL-S-80035 B, DLA MIL-S-80035 A, DLA MIL-S-80035]

JC 839.1-1998 玻璃纤维土工格栅 第一部分：沥青路面用玻璃纤维土工格栅

Fiberglass Geogrid Part 1: Fiberglass Geogrid for Asphalt Pavements

JC/T 838-1998 玻璃纤维缠绕增强热固性树酯夹砂压力管

Glass fiber winding reinforced thermosetting resin sand inclusion pressure pipe

JC/T 696-1998 离心浇铸玻璃纤维增强不饱和聚酯树脂夹砂管管件

Centrifugal casting glass fiber reinforced unsaturated polyester resin sand pipe fittings

JC/T 695-1998 离心浇铸玻璃纤维增强不饱和聚酯树脂夹砂管

Centrifugal casting glass fiber reinforced unsaturated polyester resin sand pipe

EN 1862:1997 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.暴露于化学环境后的相对弯曲蠕变系数的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment

BS EN 654:1997 弹性地板覆盖物.半挠性聚氯乙烯弹性地板覆盖物块.规范

This European Standard specifies the characteristics of semi-flexible tiles based on polyvinyl chloride and modifications thereof. To encourage the consumer to make an informed choice, this standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings. Semi-flexible polyvinyl chloride tiles. Specification

BS EN 655:1997 弹性地板覆盖物.带聚氯乙烯耐磨层垫的结合的合成软木面砖.规范

This European Standard specifies the characteristics of agglomerated cork with a wear layer based on polyvinyl chloride and modifications thereof. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings. Tiles of agglomerated composition cork with polyvinyl chloride wear layer. Specification

ANSI Z124.6-1997 塑料水箱

This standard covers physical requirements and test methods for minimum performance requirements of materials and workmanship and finish of plastic sinks.Where the term “sink” is used in this standard, it shall mean a kitchen sink, bar sink, service sink, or laundry tray with or without integral tops.The materials and equipment which are listed as having been used to conduct the testing procedures are provided solely for informational reference.

Plastic sinks

BS EN 649:1997 弹性地面覆盖物.均质和非均质聚氯乙烯地面覆盖物.规范

This European Standard specifies the characteristics of homogeneous and heterogeneous floor coverings, based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use. which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings. Homogeneous and heterogeneous polyvinyl chloride floor coverings. Specification

BS EN 651:1997 弹性地板覆盖物.有泡沫层的聚氯乙烯地板覆盖物.规范

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride with polyvinyl chloride foam layer, supplied in either tile or roll form. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification

BS EN 652:1997 弹性地板覆盖物.有软木衬的聚氯乙烯地板覆盖物.规范

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and modifications thereof with a cork-based backing, supplied in either tile or roll form. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification