Q22 建筑用塑料制品 标准查询与下载

prEN 495-2-1991 热塑性塑料屋面板和密封片.耐撕裂的测定.梯形试样法

Thermoplastic roofing and sealing sheets; determination of tear resistance; trapezoidal test specimen method

prEN 477-1991 窗户制造用未增塑聚氯乙烯型材耐降落物冲击力的测定

Unplasticized polyvinylchloride (PVC-U) profiles for the construction of windows; determination of the resistance to impact by falling mass

prEN 478-1991 窗户制造用未增塑聚氯乙烯型材加热150℃后外观试验方法

Unplasticized polyvinylchloride (PVC-U) profiles for the construction of windows; appearance after heating at 150 C; test method

GSA OO-S-236 D-1989 地板安装单轴心轮旋木工桌式圆锯

This specification covers electric motor driven, tilting arbor,able type, circular saws.

SAW, CIRCULAR, TABLE TYPE, WOODWORKING, SINGLE TILTING ARBOR, FLOOR MOUNTED

NF D11-121:1988 丙烯材料制家用浴缸.浴缸水龙头安装的补充规范

Baths for domestic purposes made of acrylic material. Additional specification for the mounting of taps on baths.

NF D11-120:1988 家用丙烯酸塑料成品浴盆规范

Specification for finished baths for domestic purposes made of acrylic material.

DIN 16737:1986 聚氯乙烯(PE-C)制的屋面毡和带编织纤维内衬层的防水薄板材.要求

This standard specifies the requirements for plastic roofing sheets and sheets for waterproofing made of chlorinated polyethylene (PE-C) with carrier of woven fabrics.

Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet with woven fabric inner layer; requirements

DIN 16731:1986 带衬料的聚异丁烯(PIB)屋面毡.要求

Polyisobuthylene (PIB) roofing felt with backing; requirements

DIN 16730:1986 与沥青不相容的增塑聚氯乙烯(PVC-P)屋面毡.要求

This standard specifies the requirements for plastic roofing sheets made of plasticized polyvinylchloride (PVC-P), not compatible with bitumen.#,,#

Plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements

DIN 16726:1986 塑料屋顶板.塑料密封板.检验

This standard specifies the methods for testing plastic roofing sheets and sheets for waterproofing.

Plastic roofing felt and waterproofing sheet; testing

DIN 16735:1986 带非编织的粗纱内衬层的增塑聚氯乙烯(PVC-P)屋面毡.要求

This standard specifies the requirements for plastic roofing sheets made of plasticized polyvinylchloride(PVC-P) with non woven glassfibre carrier, not compatible with bitumen.#,,#

Plasticized polyvinyl chloride (PVC-P) roofing felt with non-woven roving inner layer; requirements

DIN 16736:1986 不带衬料的带防水薄板的聚氯乙烯屋面毡.要求

Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet without backing; requirements

DIN 16734:1986 与沥青不相容的人造纤维增强的增塑聚氯乙烯(PVC-P)屋面毡.要求

This standard specifies the requirements for plastic roofing sheets made of plasticized polyvinylchloride (PVC-P) with reinforcement of sythetic filaments, not compatible with bitumen.#,,#

Man-made fibre reinforced plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements

ARMY MIL-T-10168 J-1986 M1948 16英寸宽带地板剖面绝缘架式帐篷

This document covers one type of general purpose insulated frame-type tent with floor .

TENT, FRAME-TYPE, INSULATED, SECTIONAL, WITH FLOOR, 16 FEET WIDE, M1948, COMPLETE

JIS K 6786:1985 浴室用塑料嵌板

Plastic panels for bath room

BS 4154-1:1985 热固性聚酯树脂半透明玻璃纤维增强塑料波纹板.第1部分:材料和性能要求规范

Gives requirements for material and performance of corrugated translucent sheets made from glass fibre reinforced thermo-setting polyester resin.

Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for material and performance requirements

BS 4154-2:1985 热固性聚酯树脂半透明玻璃纤维增强塑料波纹板.第2部分:外形和尺寸规范

Gives dimensional requirements for a range of profiles for corrugated translucent sheets made from glass fibre reinforced thermo-setting polyester resin.

Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for profiles and dimensions

DIN 16729:1984 由乙烯共聚物沥青(ECB)制成的塑料屋顶薄板材和塑料密封薄板材.要求

Ethylene copolymer bitumen (ECB) plastic roofing sheeting and plastic sealing sheeting; requirements

ISO 264:1976/Add 1:1982 承压管用硬聚氯乙烯平承口管件 安装长度 公制系列 补充1

This is Addendum 1 to ISO 264-1976 (Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series )

Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure; laying lengths; metric series; addendum 1

ASTM D1434-82(2003) 测定塑料薄膜和薄片透气性能的测试方法

These measurements give semiquantitative estimates for the gas transmission of single pure gases through film and sheeting. Correlation of measured values with any given use, such as packaged contents protection, must be determined by experience. The gas transmission rate is affected by conditions not specifically provided for in these tests, such as moisture content (Note 2), plasticizer content, and nonhomogeneities. These tests do not include any provision for testing seals that may be involved in packaging applications. Note 28212;The tests are run using gas with 0 % moisture changes. Interlaboratory testing has revealed that permeances measured by these procedures exhibit a strong dependence on the procedure being used, as well as on the laboratory performing the testing. Agreement with other methods is sometimes poor and may be material-dependent. The materials being tested often affect the between-laboratory precision. The causes of these variations are not known at this time. It is suggested that this method not be used for referee purposes unless purchaser and seller can both establish that they are measuring the same quantity to a mutually agreed upon level of precision. Use of the permeability coefficient (involving conversion of the gas transmission rate to a unit thickness basis) is not recommended unless the thickness-to-transmission rate relationship is known from previous studies. Even in essentially homogeneous structures, variations in morphology (as indicated, for example, by density) and thermal history may influence permeability.1.1 This test method covers the estimation of the steady-state rate of transmission of a gas through plastics in the form of film, sheeting, laminates, and plastic-coated papers or fabrics. This test method provides for the determination of (1) gas transmission rate (GTR), (2) permeance, and, in the case of homogeneous materials, (3) permeability.1.2 Two procedures are provided:1.2.1 Procedure M Manometric.1.2.2 Procedure V Volumetric.1.3 The values stated in SI units are to be regarded as the standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting