Q93 玻璃、玻璃纤维用设备 标准查询与下载

DIN EN 13042-1:2010 空心玻璃制品的制造、处理和加工用机器和设备.安全要求.第1部分:滴料机.德文版本EN 13042-1-2007+A1-2009

This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs. This European Standard deals with the significant hazards, hazardous situations and events relevant to gob feeders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Noise is not a significant hazard for this type of machine. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. This European Standard does not deal with bowl firing.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder; German version EN 13042-1:2007+A1:2009

EN 13035-9:2006+A1:2010 平板玻璃制造,处理和加工用机器设备.安全性要求.第4部分:倾斜台第5部分:堆垛和堆垛机和装置.第9部分:洗涤装置

This European Standard contains the safety requirements for the design and installation of stationary glass washing installations as shown as typical in Annex A. Glass washing installations are designed to perform the following functions: feeding of flat glass to the cleaning and drying unit and transport (delivery) to the estimation equipment and to the take-off position of the flat glass sheet. None of the processing phases requires direct manual intervention. This European Standard deals with the significant hazards, hazardous situations and events with the exception of those by interfaces with other machines used in a process line relevant to glass washing installations, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. Safety requirements and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where choice is necessary. This European Standard is not applicable to machines for loading and unloading of glass (see EN 13035-5) and to conveyors (see EN 619) and fans. If there are specific risks that arise by their use as an integral part of flat glass washing installations, appropriate measures are specified. This European Standard is not applicable to glass washing installations for automotive and bent glass. This European Standard is not applicable to water preparation and disposal of waste washing liquid. This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

DIN EN 13035-3:2010 平板玻璃的制造、处理和加工用机械和设备.安全性要求.第3部分:切割机械.德文版本EN 13035-3-2003+A1-2009

This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines; German version EN 13035-3:2003+A1:2009

DIN EN 13042-5:2009 中空玻璃的制造,处理和加工用机械和设备.安全要求.第5部分:压力机.德文版本EN 13042-5-2003+A1-52009

This European Standard contains the requirements for safety for the design and installation of glass presses from the feeding of the gob after shearing up to and including the take-out mechanism as far as this is part of the press. This European Standard deals with all significant hazards pertinent to glass presses when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce the risks arising from the significant hazards.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses; German version EN 13042-5:2003+A1:2009

DIN EN 13042-2:2009 空心玻璃制造,处理和加工用机械和设备.安全要求.第2部分:给料用搬运机械,德文版本EN 13042-2:2004+A1:2009

This standard contains the requirements for safety for the design and installation of handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or forming machine for hollow glass. This European Standard deals with all significant hazards, hazardous situations and events relevant to handling machines for feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding; German version EN 13042-2:2004+A1:2009

EN 13035-4:2003+A1:2009 平板玻璃制造,处理和加工用机器设备.安全性要求.第4部分:倾斜台

This standard contains the requirements for safety for the design and installation of tilting tables, where the flat glass is brought from the horizontal almost to the vertical position or vice versa by lying on or - supported at the lower edge - leaning against a supporting surface. This standard deals with all significant hazards, hazardous situations and events relevant to tilting tables for flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Noise is not a significant hazard for this type of machines. This standard is not applicable to tilting tables where all movements are done by human power. This standard is not applicable to additional equipment, e. g. for cutting (see EN 13035-3), loading and unloading (see EN 13035-5), break-out (see EN 13035-6), transporting (see EN 619) of flat glass as used as integral parts of the machinery. If there are specific risks that arise in connection with tilting tables, appropriate measures are specified. This document is not applicable to tilting tables which are manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables

EN 13035-5:2006+A1:2009 平板玻璃制造,处理和加工用机器设备.安全性要求.第4部分:倾斜台第5部分:堆垛和堆垛机和装置

This European Standard applies for machines and installations for stacking and de-stacking that are specifically designed for building-up or taking down upright stacks of flat glass sheet by sheet including unloading and loading of single sheets of flat glass from or onto machines or transport devices (conveyors). NOTE For sketches with examples of typical constructions, see Annex A (informative), Figures A.1 to A.9. This European Standard deals with the significant hazards, hazardous situations and events relevant to machines and installations for stacking and de-stacking flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. This European Standard is not applicable to the significant hazards of conveyors and other machines for the manufacture, treatment and processing of flat glass, e. g. tilting tables, equipment for storage of flat glass, such as stillages. If there are specific hazards which arise by the co-operation of this machinery and equipment with machines and installations for stacking and de-stacking, appropriate measures are specified. This European Standard is not applicable to building up or taking down stacks by means of cranes that are temporarily equipped via hook with load-lifting attachments with suction cups to lift flat glass. When compiling this European Standard, it was assumed that lifting movements are only used as part of full automatic machines and that the related hazards are not significant. This European Standard is not applicable to machines and installations for stacking and de-stacking which are manufactured before the date of publication of this European Standard by CEN. Noise is not a significant hazard for this type of machinery. The A-weighted emission sound pressure level at workstations does not exceed 70 dB(A).

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking

EN 13035-7:2006+A1:2009 平板玻璃制造,处理和加工用机器设备.安全性要求.第4部分:倾斜台第5部分:堆垛和堆垛机和装置.第7部分:夹层玻璃的切割机

This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation. This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditions of mis- use which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant. This European Standard is not applicable to cutting (scoring) and break-out of monolithic glass (see EN 13035-3 and EN 13035-6). This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-pressure liquid. This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables. This European Standard is not applicable to cutting machines for laminated glass which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass

EN 13042-1:2007+A1:2009 中空玻璃制造,处理和加工用机器设备.安全性要求.第1部分:滴料机

This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs. This European Standard deals with the significant hazards, hazardous situations and events relevant to gob feeders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Noise is not a significant hazard for this type of machine. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. This European Standard does not deal with bowl firing. This European Standard is not applicable to gob feeders which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder

EN 13035-3:2003+A1:2009 平板玻璃制造,处理和加工用机器设备.安全性要求.第3部分:切割机

This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. This standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see EN 13035-5 and EN 13035-6). This standard does not apply to conveyors (see EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. This standard does not apply to cutting of laminated glass (see EN 13035-7). This standard does not apply to cutting while the glass is moving. This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

EN 13042-5:2003+A1:2009 中空玻璃制造,处理和加工用机器设备.安全性要求.第5部分:印刷机

This standard contains the requirements for the design and installation of glass presses including equipment for feeding of portions of molten glass to the mould, loading equipment and equipment for discharging articles (take-out) when these are integral parts of the presses. !This standard deals with all significant hazards, hazardous situations and events relevant to glass presses when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance." This standard does not deal with forming machines for hollow glass where the press operation is only a part of the hot-forming process, such as the press/blow process of IS machines (see !EN 13042-3"). This standard does not deal with gob feeders (see !EN 13042-1") and handling machines for feeding (see !EN 13042-2") which are self-standing machines and dealt with in other standards of the series regarding machinery used in the production of hollow glass. This document is not applicable to presses which are manufactured before the date of publication of this document by CEN. This standard deals only with hazards arising from the application of components which may be used in glass presses, such as motors and continuous handling equipment. More particular safety requirements are dealt with within standards more specific to that component, including noise. This standard does not deal with equipment for cooling and waste ejection with air or heating from an outside system.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

EN 13042-2:2004+A1:2009 中空玻璃制造,处理和加工用机器设备.安全性要求.第2部分:进料搬运机

This document contains the requirements for safety for the design and installation of stationary handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or to a forming machine for hollow glass. This European Standard deals with all significant hazards, hazardous situations and events relevant to handling machines for feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance. This European Standard does not deal with the exclusive feeding with shears alone, with the transport of the melted glass post by its own weight in free fall or by trueing (gob feeder, see EN 13042-1). This document is not applicable to handling machines for feeding which are manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

EN 13042-3:2007+A1:2009 中空玻璃制造,处理和加工用机器设备.安全性要求.第3部分:IS机器

This European Standard applies to the design and installation of IS machines including the gob distributor and machine conveyor. This European Standard deals with the significant hazards, hazardous situations and events relevant to IS machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance. This European Standard does not deal with gob feeders (see EN 13042-1) and handling machines for feeding (see EN 13042-2) which are self-standing machines used for the delivery of portions of melted glass to hollowglass-forming machines such as glass presses (see EN 13042-5). This European Standard is not applicable to IS machines which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines

ISO 28721-2:2008 釉瓷和搪瓷.加工厂的玻璃层设备.第2部分:耐化学反应腐蚀和热冲击的设计和规范

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock

DIN EN 13035-2:2008 平面玻璃的制造、处理和加工用机械和设备.安全要求.第2部分:工厂外的存储、搬运和运输设备

1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage (as defined in 3.2.1), handling (as defined in 3.2.2) and transportation (as defined in 3.2.3) of flat glass outside the factory (as defined in 3.1.1) and including stillages, pallets, frails fixed to vehicles, in- loader vehicles, specific glass-securing devices, stanchions and vacuum-lifting devices which are used for road transport and on building sites. 1.2 Specific hazards due to the use inside the factory are dealt with in EN 13035-1. 1.3 This standard deals only with the devices which are directly in contact with the glass. This standard does not apply to manual handling equipment such as carrying straps and vacuum pads. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with the glass. This European Standard does not apply to equipment for the transport by other ways than on road e.g. by ship or train, and the transportation of glazed windows/frames. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment for the storage, handling and transportation of fiat glass, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass outside the factory, which is manufactured before the date of its publication as EN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory; English version of DIN EN 13035-2:2008-06

BS EN 13035-7:2006+A1:2009 平面玻璃的制造、处理和加工用机械和设备.安全要求.薄板状玻璃用切割机

1.1 This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant. 1.3 This European Standard is not applicable to cutting (scoring) and break-out of monolithic glass (see EN 13035-3 and EN 13035-6). 1.4 This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-pressure liquid. 1.5 This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables. 1.6 This European Standard is not applicable to cutting machines for laminated glass which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines for laminated glass

BS EN 13035-6:2006+A1:2009 平板玻璃的生产、处理和加工用机械和设备.安全性要求.粉碎机械

This European Standard applies for machines for break-out of flat glass including the following steps: transport and positioning, break-out, transport of the cut sizes to the unloading position, leading away of waste flat glass.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Machines for break-out

BS EN 13035-7:2006 平面玻璃的制造、处理和加工用机械和设备.安全要求.薄板状玻璃用切割机

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines for laminated glass

BS EN 13035-6:2006 平板玻璃的生产、处理和加工用机械和设备.安全要求.原料制备机械

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Machines for break-out

BS EN 13035-5:2006 平面玻璃的制造、处理和加工用机械和设备.安全要求.堆垛和卸垛用机械和设备

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Machines and installations for stacking and de-stacking