Q93 玻璃、玻璃纤维用设备 标准查询与下载

CEN EN 13035-9-2006 制造、处理和加工平板玻璃的厂房和机械.安全性要求.第9部分:洗涤安装

1.1 This European Standard contains the safety requirements for the design and installation of stationary glass washing installations as shown as typical in Annex A. Glass washing installations are designed to perform the following functions: feeding of flat glass to the cleaning and drying unit and transport (delivery) to the estimation equipment and to the take-off position of the flat glass sheet. None of the processing phases requires direct manual intervention. 1.2 This European Standard deals with the significant hazards, hazardous situations and events with the exception of those by interfaces with other machines used in a process line relevant to glass washing installations, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. 1.3 This European Standard is not applicable to machines for loading and unloading of glass (see EN 13035-5) and to conveyors (see EN 619) and fans. If there are specific risks that arise by their use as an integral part of flat glass washing installations, appropriate measures are specified. 1.4 This European Standard is not applicable to glass washing installations for automotive and bent glass. 1.5 This European Standard is not applicable to water preparation and disposal of waste washing liquid. 1.6 This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

CEN EN 13035-9-2006_ 制造、处理和加工平板玻璃的厂房和机械.安全性要求.第9部分:洗涤安装

1.1 This European Standard contains the safety requirements for the design and installation of stationary glass washing installations as shown as typical in Annex A. Glass washing installations are designed to perform the following functions: feeding of flat glass to the cleaning and drying unit and transport (delivery) to the estimation equipment and to the take-off position of the flat glass sheet. None of the processing phases requires direct manual intervention. 1.2 This European Standard deals with the significant hazards, hazardous situations and events with the exception of those by interfaces with other machines used in a process line relevant to glass washing installations, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. 1.3 This European Standard is not applicable to machines for loading and unloading of glass (see EN 13035-5) and to conveyors (see EN 619) and fans. If there are specific risks that arise by their use as an integral part of flat glass washing installations, appropriate measures are specified. 1.4 This European Standard is not applicable to glass washing installations for automotive and bent glass. 1.5 This European Standard is not applicable to water preparation and disposal of waste washing liquid. 1.6 This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 9: Washing installations

ASHRAE QC-06-013-2006 大的玻璃块的太阳热增益系数

Solar Heat Gain Coefficients for High-Mass Glazing Blocks

Solar Heat Gain Coefficients for High-Mass Glazing Blocks

JC/T 952-2005 玻璃纤维增强水泥永久性管状芯模

本标准规定了玻璃纤维增强水泥永久性管状芯模的规格与标记、材料、技术要求、试验方法、检验规则、标志、堆放与运输。 本标准适用于以耐碱玻璃纤维为主要增强材料、快硬硫铝酸盐水泥、快硬铁铝酸盐水泥或低碱度硫铝酸盐水泥为胶凝材料、砂子为集料、也可加入粉煤灰等掺合料制成的两端封闭的玻璃纤维增强水泥永久性管状芯模。本标准适用于原璃纤维增强水泥圆形管状芯模，椭圆形、梯形等异型管状芯模可参照本标准使用。该产品作为非抽芯成孔的芯模用于现浇钢筋混凝土空心楼板、桥面板及其它空心构造中。

Glassfibre reinforced cement permanent tube-shaped core formwork

JC/T 613-2005 混凝土和钢筋混凝土排水管钢模

本标准规定了混凝土和钢筋混凝土排水管钢模的术语和定义、产品分类、技术要求、试验方法、检验规则以及标志、包装、贮存和运输。 本标准适用于GB 11836-1999所规定的离心、悬辊、振动及立式挤压成型的混凝土和钢筋混凝土排水管钢模(以下简称管模)。

Steel mould of concrete and reinforced concrete sewer pipe

JC/T 605-2005 先张法预应力混凝土管桩钢模

本标准规定了先张法预应力混凝土管桩钢模的术语、代号、产品分类、技术要求、试验方法、检验规则、标志、包装、贮存和运输。 本标准适用于离心成型的符合GB 13476-1999规定的先张法预应力混凝土管桩的钢模(以下简称桩模)，也适用于离心成型的符合JC 888-2001规定的先张法预应力混凝土薄壁管桩的钢模。

Steel model of pretensioned squn concrete piles

JC/T 966-2005 预应力混凝土用钢棒镦头机

本标准规定了预应力混凝土用钢棒镦头机的术语和定义、分类、技术要求、试验方法、检验规则以及标志、包装、贮存和运输。 本标准适用于对符合YB/T 111-1997规定要求的预应力混凝土用钢棒采用程序控制电加热进行镦头加工的镦头机(以下简称镦头机)。

Upseter of steel bars for prestressed concrete

JC/T 971-2005 水泥制品工业用水压试验机

本标准规定了水泥制品工业用水压试验机(以下简称水压机)的术语和定义、分类、分级、技术要求、试验方法、检验规则以及标志、包装、贮存和运输等。 本标准适用于对符合GB 4084、GB 5695、GB 5696、GB/T 11836、JC/T 640、JC/T 923等要求的水泥制品进行内压试验用的水压机。

Hydrostatic testing machine for cement products industry

JC/T 957-2005 水泥包装袋跌落试验机

本标准规定了水泥包装袋跌落试验机(以下简称试验机)的基本结构、正常使用条件、技术要求、检验方法、检验规则以及包装与标志等内容。 本标准适用于GB 9774-2002水泥包装袋标准中检测水泥包装袋牢固度的跌落试验机。

Falling bag apparatus of sacks for packing cement

JC/T 464-2005 水泥工业用空气炮清堵器

本标准规定了水泥工业用空气炮清堵器的术语和定义、型式、规格、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于工作环境温度为-20℃～60℃，工作气压为0.4MPa～0.8MPa的水泥工业用空气炮清堵器(以下简称空气炮清堵器)。类似产品也可参照执行。

Air cannon for cement industry

BS EN 13042-2:2004+A1:2009 空心玻璃制造,处理和加工用机械和设备.安全要求.给料用搬运机械

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Handling machines for feeding

BS EN 13042-2:2004 空心玻璃生产、处理和加工用机械和设备.安全要求.给料用搬运机械

1 This document contains the requirements for safety for the design and installation of stationary handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or to a forming machine for hollow glass. 2 This document deals with all significant hazards, hazardous situations and events relevant to machines for feeding, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This document specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. 3 This does not deal with the exclusive feeding with shearers (shears) alone with the transport of the melted glass post by its own weight in free fall or by trueing (gob feeder, see prEN 13042-1). 4 This document is not applicable to handling machines for feeding which are manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Handling machines for feeding

BS EN 13042-5:2003+A1:2009 中空玻璃生产、处理和加工用机械和设备.安全要求.压力机

This standard contains the requirements for the design and installation of glass presses including equipment for feeding of portions of molten glass to the mould, loading equipment and equipment for discharging articles (take-out) when these are integral parts of the presses.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Presses

BS EN 13042-5:2003 空心玻璃生产、处理和加工用机械和设备.安全要求.压力机

1 This standard contains the requirements for the design and installation of glass presses including equipment for feeding of portions of molten glass to the mould, loading equipment and equipment for discharging articles (take-out) when these are integral parts of the presses. 2 This standard deals with all significant hazards, hazardous situations and events relevant to glass presses when they are used as intended and under the conditions foreseeable by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. 3 This standard does not deal with forming machines for hollow glass where the press operation is only a part of the hot-forming process, such as the press/blow process of IS machines (see prEN 13042-3). 4 This standard does not deal with gob feeders (see prEN 13042-1) and handling machines for feeding (see prEN 13042-2) which are self-standing machines and dealt with in other standards of the series regarding machinery used in the production of hollow glass. 5 This document is not applicable to presses which are manufactured before the date of publication of this document by CEN. 6 This standard deals only with hazards arising from the application of components which may be used in glass presses, such as motors and continuous handling equipment. More particular safety requirements are dealt with within standards more specific to that component, including noise. 7 This standard does not deal with equipment for cooling and waste ejection with air or heating from an outside system.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Presses

BS EN 13035-4:2003+A1:2009 平板玻璃的制造、处理和加工用机械和设备.安全要求.倾斜台

This standard contains the requirements for safety for the design and installation of tilting tables, where the flat glass is brought from the horizontal almost to the vertical position or vice versa by lying on or – supported at the lower edge – leaning against a supporting surface.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Tilting tables

BS EN 13035-3:2003 平板玻璃的制造、处理和加工用机械和设备.安全要求.切割机

1 This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. 2 This standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions foreseeable by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. Hazards from noise are not considered to be significant. 3 This standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. 4 This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see prEN 13035-5 and prEN 13035-6). 5 This standard does not apply to conveyors (see EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. 6 This standard does not apply to cutting of laminated glass (see prEN 13035-7). 7 This standard does not apply to cutting while the glass is moving. 8 This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines

BS EN 13035-4:2003 平板玻璃的制造、处理和加工用机械和设备.安全要求.倾斜台

1 This standard contains the requirements for safety for the design and installation of tilting tables, where the flat glass is brought from the horizontal almost to the vertical position or vice versa by lying on or - supported at the lower edge - leaning against a supporting surface. 2 This standard deals with all significant hazards, hazardous situations and events relevant to tilting tables for flat glass, when they are used as intended and under the conditions foreseeable by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. 3 This standard is not applicable to tilting tables where all movements are done by human power. 4 This standard is not applicable to additional equipment, e.g. for cutting (see prEN 13035-3), loading and unloading (see prEN 13035-5), break-out (see prEN 13035-6), transporting (see EN 619) of flat glass as used as integral parts of the machinery. If there are specific risks that arise in connection with tilting tables, appropriate measures are specified. 5 This document is not applicable to tilting tables which are manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Tilting tables

BS EN 13035-3:2003+A1:2009 平板玻璃的制造、处理和加工用机械和设备.安全性要求.切割机

1.1 This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. 1.2 !This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance." 1.3 This standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. 1.4 This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see !EN 13035-5 and EN 13035-6"). 1.5 This standard does not apply to conveyors (see EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. 1.6 This standard does not apply to cutting of laminated glass (see !EN 13035-7"). 1.7 This standard does not apply to cutting while the glass is moving. 1.8 This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines

JC/T 836-1998 玻璃纤维捻线机

Twisting machine for glass fiber

JC/T 604-1995 浮法玻璃退火窑

Float Glass Lehr