Q93 玻璃、玻璃纤维用设备 标准查询与下载

BS EN 13035-7:2006+A1:2009 平面玻璃的制造、处理和加工用机械和设备.安全要求.薄板状玻璃用切割机

1.1 This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant. 1.3 This European Standard is not applicable to cutting (scoring) and break-out of monolithic glass (see EN 13035-3 and EN 13035-6). 1.4 This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-pressure liquid. 1.5 This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables. 1.6 This European Standard is not applicable to cutting machines for laminated glass which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines for laminated glass

BS EN 13035-5:2006+A1:2009 平面玻璃的制造、处理和加工用机械和设备.安全性要求.堆垛和卸垛用机械和设备

This European Standard applies for machines and installations for stacking and de-stacking that are specifically designed for building-up or taking down upright stacks of flat glass sheet by sheet including unloading and loading of single sheets of flat glass from or onto machines or transport devices (conveyors).

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Machines and installations for stacking and de-stacking

BS EN 13035-6:2006+A1:2009 平板玻璃的生产、处理和加工用机械和设备.安全性要求.粉碎机械

This European Standard applies for machines for break-out of flat glass including the following steps: transport and positioning, break-out, transport of the cut sizes to the unloading position, leading away of waste flat glass.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Machines for break-out

DIN EN 13035-1:2008 平面玻璃的制造、处理和加工用机械和设备.安全要求.第1部分:工厂内的储存、搬运和运输设备

1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass inside the factory as described in Clause 3. It applies to stationary, movable and mobile storage equipment (see 3.2), mechanical and pneumatic handling equipment (see 3.3) and transportation equipment (see 3.4) (see overview in Annex A). 1.2 Additional requirements for dealing with specific hazards due to the use outside the factory are dealt with in prEN 13035-2. 1.3 This standard only deals with the devices which are directly in contact with the glass. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with the glass (see 3.4.1). This standard does not apply to manual handling equipment as defined in 3.3.1. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment for the storage, handling and transportation of flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass inside the factory, which is manufactured before the date of its publication as EN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory; English version of DIN EN 13035-1:2008-06

BS EN 13035-9:2006 平面玻璃的制造、处理和加工用机械和设备.安全要求.第9部分:清洗装置

1.1 This European Standard contains the safety requirements for the design and installation of stationary glass washing installations as shown as typical in Annex A. Glass washing installations are designed to perform the following functions: feeding of flat glass to the cleaning and drying unit and transport (delivery) to the estimation equipment and to the take-off position of the flat glass sheet. None of the processing phases requires direct manual intervention. 1.2 This European Standard deals with the significant hazards, hazardous situations and events with the exception of those by interfaces with other machines used in a process line relevant to glass washing installations, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. 1.3 This European Standard is not applicable to machines for loading and unloading of glass (see EN 13035-5) and to conveyors (see EN 619) and fans. If there are specific risks that arise by their use as an integral part of flat glass washing installations, appropriate measures are specified. 1.4 This European Standard is not applicable to glass washing installations for automotive and bent glass. 1.5 This European Standard is not applicable to water preparation and disposal of waste washing liquid. 1.6 This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 9: Washing installations

BS EN 13035-9:2006+A1:2010 平面玻璃的制造、处理和加工用机械和设备.安全性要求.第9部分:清洗装置

1.1 This European Standard contains the safety requirements for the design and installation of stationary glass washing installations as shown as typical in Annex A. Glass washing installations are designed to perform the following functions: feeding of flat glass to the cleaning and drying unit and transport (delivery) to the estimation equipment and to the take-off position of the flat glass sheet. None of the processing phases requires direct manual intervention. 1.2 !This European Standard deals with the significant hazards, hazardous situations and events with the exception of those by interfaces with other machines used in a process line relevant to glass washing installations, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4)." This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. ! Safety requirements and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where choice is necessary." 1.3 This European Standard is not applicable to machines for loading and unloading of glass (see EN 13035-5) and to conveyors (see EN 619) and fans. If there are specific risks that arise by their use as an integral part of flat glass washing installations, appropriate measures are specified. 1.4 This European Standard is not applicable to glass washing installations for automotive and bent glass. 1.5 This European Standard is not applicable to water preparation and disposal of waste washing liquid. 1.6 This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Washing installations

CEN EN 13035-1-2008_ 制造、处理和加工平板玻璃的厂房和机械.安全性要求.第1部分:工厂内的储存、处理和运输设备

1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass inside the factory as described in Clause 3. It applies to stationary, movable and mobile storage equipment (see 3.2), mechanical and pneumatic handling equipment (see 3.3) and transportation equipment (see 3.4) (see overview in Annex A). 1.2 Additional requirements for dealing with specific hazards due to the use outside the factory are dealt with in prEN 13035-2. 1.3 This standard only deals with the devices which are directly in contact with the glass. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with the glass (see 3.4.1). This standard does not apply to manual handling equipment as defined in 3.3.1. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment for the storage, handling and transportation of flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass inside the factory, which is manufactured before the date of its publication as EN.

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 1: Storage, handling and transportation equipment inside the factory

CEN EN 13035-2-2008_ 制造、处理和加工平板玻璃的厂房和机械.安全性要求.第2部分:工厂外的储存、处理和运输设备

1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage (as defined in 3.2.1), handling (as defined in 3.2.2) and transportation (as defined in 3.2.3) of flat glass outside the factory (as defined in 3.1.1) and including stillages, pallets, frails fixed to vehicles, inloader vehicles, specific glass-securing devices, stanchions and vacuum-lifting devices which are used for road transport and on building sites. 1.2 Specific hazards due to the use inside the factory are dealt with in EN 13035-1. 1.3 This standard deals only with the devices which are directly in contact with the glass. This standard does not apply to manual handling equipment such as carrying straps and vacuum pads. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with the glass. This European Standard does not apply to equipment for the transport by other ways than on road e.g. by ship or train, and the transportation of glazed windows/frames. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment for the storage, handling and transportation of flat glass, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass outside the factory, which is manufactured before the date of its publication as EN.

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 2: Storage, handling and transportation equipment outside the factory

BS EN 13042-3:2007+A1:2009 空心玻璃制造,处理和加工用机械和设备.安全性要求.IS机械

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - IS Machines

BS EN 13042-1:2007+A1:2009 空心玻璃制造、处理和加工用机器和设备.安全性要求.滴料机

1.1 This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs. ! 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to gob feeders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Noise is not a significant hazard for this type of machine. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance." 1.3 This European Standard does not deal with bowl firing. 1.4 This European Standard is not applicable to gob feeders which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Gob feeder

BS EN 13042-1:2007 空心玻璃制造、处理和加工用机器和设备.安全要求.滴料机

1.1 This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to gob feeders, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, operation and maintenance. 1.3 This European Standard does not deal with bowl firing. 1.4 This European Standard is not applicable to gob feeders which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 1: Gob feeder

BS EN 13042-3:2007 空心玻璃制造、处理和加工用机器和设备.IS机器

1.1 This European Standard applies to the design and installation of IS machines including the gob distributor and machine conveyor. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to IS machines, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. 1.3 This European Standard does not deal with gob feeders (see EN 13042-1) and handling machines for feeding (see EN 13042-2) which are self-standing machines used for the delivery of portions of melted glass to hollowglass- forming machines such as glass presses (see EN 13042-5). 1.4 This European Standard is not applicable to IS machines which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 3: IS Machines

JC/T 1028-2007 玻璃纤维工业用隧道式原丝烘干炉

本标准规定了玻璃纤维工业用隧道式原丝烘干炉（以下简称烘干炉）的产品分类、技术要求、试验方法、检验规则和标志、包装运输及贮存。 本标准适用于玻璃纤维工业用隧道式原丝烘干炉，其他行业同类产品可参照使用。

Tunnel type glass strand oven

DIN EN 13042-3:2007 空心玻璃制品的制造、处理和加工用机器和设备.安全要求.第3部分:行列机(IS Machines)

1.1 This European Standard applies to the design and installation of Is machines including the gob distributor and machine conveyor. 1.2 This European Standard deals not does not deals with the significant hazards,hazardous situations and events relevant to IS machines,when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. 1.3 This European Standard does not deal withbowl gob feeders(seeEN 13042-1) and handling machines for feed-ing (see EN 13042-2) which are self-standing machines used for the delivery of portions of melted glass to hollow-glass-forming machines such as glass presses(see EN 13042-5). 1.4 This European Standard is not applicable to IS machines which are manufactured before the date of publica-tion of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS Machines; German version EN 13042-3:2007

DIN EN 13042-1:2007 空心玻璃制品的制造、处理和加工用机器和设备.安全要求.第1部分:滴料机

1.1 This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs. 1.2 This European Standard deals with the significant hazards,hazardous situations and events relevant to gob feeders,when they are as intended and under the conditions foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning ,operation and maintenance. 1.3 This European Standard does not deal withbowl firing. 1.4 This European Standard is not applicable to gob feeders which are manufactured before the date of publica-tion of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder; German version EN 13042-1:2007

DIN EN 13035-11:2006 平板玻璃制造、处理和加工用机械和设备.安全性要求.第11部分:钻床

1.1 This European Standard contains the requirements for stationary machines for the drilling of flat glass, using a powered rotating tool. Stationary machines are classified into: a) manual; b) semi-automatic; c) automatic single-head or multi-head; d) fully automatic. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to drilling machines for flat glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. 1.3 This European Standard does not address the safety requirements for conveyor belts, rollers (see EN 619) or other means of transporting the glass to and from the drilling machine (see e.g. EN 13035-5). 1.4 This European Standard is not applicable to drilling machines which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines; German version EN 13035-11:2006

DIN EN 13035-7:2006 平板玻璃制造、处理和加工用机械和设备.安全性要求.第7部分:层压玻璃的切割机械

1.1 This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditons foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. Hazards from niose are not considered to be significant. 1.3 This European Standard is not applicable to cutting (scoring) and break-out of monolithoic glass (see EN 13035-3 and EN 13035-6). 1.4 This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-pressure liquid. 1.5 This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables. 1.6 This European Standard is not applicable to cutting machines for laminated glass which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass; German version EN 13035-7:2006

DIN EN 13035-6:2006 平板玻璃制造、处理和加工用机械和设备.安全性要求.第6部分:断裂试验设备

1.1 This European Standard applies for machines for break-out of flat glass including the following steps: transport and positioning, break-out, transport of the cut sizes to the unloading position, leading away of waste flat glass. 1.2 This European Standard deals with the siginificant hazards, hazardous situations and events relevant to machines for the break-out of flat glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Those hazards which are dealt with in EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. Hazards from noise are not considered to be significant. 1.3 This European Standard is not applicable to the break-out operation (opening the cut) of cutting machines for laminated glass (see EN 13035-7). 1.4 This European Standard is not applicable to the treatment of waste flat glass such as crushing and/or charging of waste flat glass into bins, containers. 1.5 This European Standard does not apply to the significant hazards of conveyors. If there are specific hazards which arise by the co-operation of conveyors with machines for break-out of flat glass, appropriate measures are specified. 1.6 This European Standard is not applicable to machines for break-out of flat glass which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break out; German version EN 13035-6:2006

DIN EN 13035-5:2006 平板玻璃制造、处理和加工用机械和设备.安全性要求.第5部分:堆积和卸垛的机械和安装

1.1 This European Standard applies for machines and installations for stacking and de-stacking that are specifically designed for building-up or taking down upright stacks of flat glass sheet by sheet including unloading and loading of single sheets of flat glass from or onto machines or transport devices (conveyors). NOTE For sketches with examples of typical constructions, see Annex A (informative), Figure A.1 to A.9. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to machines and installations for stacking and de-stacking flat glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4).Those hazards which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. 1.3 This European Standard is not applicable to the significant hazards of conveyors and other machines for the manufacture, treatment and processing of flat galss, e.g. tilting tables, equipment for storage of flat glass, such as stillages. If there are specific hazards which arise by the co-operation of this machinery and equipment with machines and installations for stacking and de-stacking, appropriate measures are specified. 1.4 This European Standard is not applicable to building up or taking down stacks by means of cranes that are temporarily equipped via hook with load-lifting attachments with suction cups to lift flat glass. 1.5 When compiling this European Standard, it was assumed that lifting movements are only used as part of full automatic machines and that the related hazards are not significant. 1.6 This European Standard is not applicable to machines and installations for stacking and de-stacking which are manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking; German version EN 13035-5:2006

DIN EN 13035-9:2006 平板玻璃制造、处理和加工用机械和设备.安全性要求.第9部分:清洗装置

1.1 This European Standard contains the safety requirements for the design and installation of stationary glass washing installations as shown as typical in Annex A. Glass washing installations are designed to perform the following functions: feeding of flat glass to the cleaning and drying unit and transport (delivery) to the estimation equipment and to the take-off position of the flat glass sheet. None of the processing phases requires direct manual intervention. 1.2 This European Standard deals with the significant hazards, hazardous situations and events with the exception of those by interfaces with other machines used in a process line relevant to glass washing installations, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. 1.3 This European Standard is not applicable to machines for loading and unloading of glass (see EN 13035-5) and to conveyors (see EN 619) and fans. If there are specific risks that arise by their use as an integral part of flat glass washing installations, appropriate measures are specified. 1.4 This European Standard is not applicable to glass washing installations for automotive and bent glass. 1.5 This European Standard is not applicable to water preparation and disposal of waste washing liquid. 1.6 This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations; German version EN 13035-9:2006