S61 信号器材 标准查询与下载
共找到 288 条与 信号器材 相关的标准，共 20 页
本标准规定了三相交流道岔控制电路用断相保护器的技术要求、检验方法、检验规则和标志、包装、运输及储存。 本标准适用于断相保护器的设计、制造、检验。
Phase interruption protector for railway signal
- ICS
- 45.020
- CCS
- S61
- 发布
- 2015-04-24
- 实施
- 2015-11-01
Railway rolling stock. Acoustic signaling devices. General specifications
- ICS
- 45.020
- CCS
- S61
- 发布
- 2015
- 实施
- 2016-03-01
Electric signalling systems for railways - Part 103: Identification of safety requirements for technical functions in railway signalling
- ICS
- 93.100
- CCS
- S61
- 发布
- 2014-11
- 实施
Railway applications - Procedure to determine the performance requirements for radio systems applied to radio-based train control systems
- ICS
- 45.060
- CCS
- S61
- 发布
- 2014-04-10
- 实施
Electric signalling systems for railways - Part 200: Safe transmission protocol according to EN 50159
- ICS
- 35.240.60;93.100
- CCS
- S61
- 发布
- 2014-02
- 实施
Electric signalling systems for railways - Part 102: Protection profile for technical functions in railway signalling
- ICS
- 93.100
- CCS
- S61
- 发布
- 2013-12
- 实施
- 2013-12-01
Railways applications.Direct current signalling relays; German version EN 50578:2013
- ICS
- 29.120.70;93.100
- CCS
- S61
- 发布
- 2013-12
- 实施
- 2013-12-01
Railway applications - External visible and audible warning devices for trains - Part 1: head, marker and tail lamps
- ICS
- 45.060.10
- CCS
- S61
- 发布
- 2013-04-27
- 实施
- 2013-04-27
Electric signalling systems for railways - Part 103: Identification of safety requirements for technical functions in railway signalling
- ICS
- 93.100
- CCS
- S61
- 发布
- 2013-04
- 实施
Railway applications - External visible and audible warning devices for trains - Part 1: Head, marker and tail lamps; German version EN 15153-1:2013
- ICS
- 45.060.10
- CCS
- S61
- 发布
- 2013-04
- 实施
Railway applications. External visible and audible warning devices for trains. Head, marker and tail lamps
- ICS
- 45.060.10
- CCS
- S61
- 发布
- 2013-02-28
- 实施
- 2013-02-28
Railway applications - External visible and audible warning devices for trains - Part 2: warning horns
- ICS
- 45.060.10
- CCS
- S61
- 发布
- 2013-02-28
- 实施
- 2013-02-28
TB/T 1869的本部分规定了主要用于25 Hz相敏轨道电路中作为送电端电源变压器或受电端中继变压器的25 Hz系列轨道变压器(以下简称变压器)的产品型号、技术要求、试验方法、检验规则及标志、包装、运输、贮存。本部分适用于25 Hz系列轨道变压器的设计、制造、检验和维修。
Transformers for railway signaling.Part 4:25 Hz series track transformers
- ICS
- 45.020
- CCS
- S61
- 发布
- 2013-02-20
- 实施
- 2013-06-01
TB/T 1869的本部分规定了主要用于50 Hz交流轨道电路中作为送电端电源变压器的50 Hz系列轨道变压器(以下简称变压器)的产品型号、技术要求、试验方法、检验规则及标志、包装、运输、贮存;其中BGD-A型变压器用于直流电力牵引的50 Hz相敏轨道电路中作为送电端电源变压器。本部分适用于变压器的设计、制造、检验和维修。
Transformers for railway signaling.Part3:50 Hz series track transformers
- ICS
- 45.020
- CCS
- S61
- 发布
- 2013-02-20
- 实施
TB/T 1869的本部分规定了铁路信号用变压器(以下简称变压器)的命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于300 VA(不包含扼流变压器)及以下的干式小型变压器的设计、制造、检验和维修。其他铁路信号用变压器可参照使用。
Transformers for railway signaling.Part1:General technical specifications
- ICS
- 45.020
- CCS
- S61
- 发布
- 2013-02-20
- 实施
- 2013-06-01
TB/T 1869的本部分规定了主要用于色灯信号机的点灯电路或其他信号用电源的信号变压器(以下简称变压器)的产品型号、技术要求、试验方法、检验规则及标志、包装、运输、贮存。本部分适用于变压器的设计、制造、检验和维修。
Transformers for railway signaling.Part2:Signal transformers
- ICS
- 45.020
- CCS
- S61
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本规程适用于铁路轨道信号测试设备综合校验装置（以下简称综合校验装置）的首次检定、后续检定和使用中检查。
Comprehensive Calibrators for Test Equipment of Railway Track Signal
- ICS
- CCS
- S61
- 发布
- 2013-01-06
- 实施
- 2013-04-06
Railway applications - Urban guided transport management and command/control systems - Part 2 : functional requirements specification.
- ICS
- 03.220.30;35.240.60
- CCS
- S61
- 发布
- 2012-07-01
- 实施
- 2012-07-13
1.1 This European Standard specifies the process and technical requirements for the development of software for programmable electronic systems for use in railway control and protection applications. It is aimed at use in any area where there are safety implications. These systems can be implemented using dedicated microprocessors, programmable logic controllers, multiprocessor distributed systems, larger scale central processor systems or other architectures. 1.2 This European Standard is applicable exclusively to software and the interaction between software and the system of which it is part. 1.3 This European Standard is not relevant for software that has been identified as having no impact on safety, i.e. software of which failures cannot affect any identified safety functions. 1.4 This European Standard applies to all safety related software used in railway control and protection systems, including – application programming, – operating systems, – support tools, – firmware. Application programming comprises high level programming, low level programming and special purpose programming (for example: Programmable logic controller ladder logic). 1.5 This European Standard also addresses the use of pre-existing software and tools. Such software may be used, if the specific requirements in 7.3.4.7 and 6.5.4.16 on pre-existing software and for tools in 6.7 are fulfilled. 1.6 Software developed according to any version of this European Standard will be considered as compliant and not subject to the requirements on pre-existing software. 1.7 This European Standard considers that modern application design often makes use of generic software that is suitable as a basis for various applications. Such generic software is then configured by data, algorithms, or both, for producing the executable software for the application. The general Clauses 1 to 6 and 9 of this European Standard apply to generic software as well as for application data or algorithms. The specific Clause 7 applies only for generic software while Clause 8 provides the specific requirements for application data or algorithms. 1.8 This European Standard is not intended to address commercial issues. These should be addressed as an essential part of any contractual agreement. All the clauses of this European Standard will need careful consideration in any commercial situation. 1.9 This European Standard is not intended to be retrospective. It therefore applies primarily to new developments and only applies in its entirety to existing systems if these are subjected to major modifications. For minor changes, only 9.2 applies. The assessor has to analyse the evidences provided in the software documentation to confirm whether the determination of the nature and scope of software changes is adequate. However, application of this European Standard during upgrades and maintenance of existing software is highly recommended.
Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems
- ICS
- 35.240.60;45.020;93.100
- CCS
- S61
- 发布
- 2011-07-31
- 实施
- 2011-07-31
TB/T 2860的本部分规定了ZK4型电空转撤机（以下简称转撤机）的型号、基本参数与尺寸、技术要求、试验方法、检验规则和标志、包装、运输、贮存等。 本部分适用于转辙机的设计、制造及检验。
Electropneumatic switch machines.Part 2: Type ZK4 switch machines
- ICS
- 45.020
- CCS
- S61
- 发布
- 2011-07-15
- 实施
- 2012-01-01
