T14 润滑、冷却系统与加热装置 标准查询与下载

DIN 73411-2:1996 汽车冷却管.软管和化合物.第2部分:要求和试验

The following requirements are given: Leakage, hardness, strength, aging, oil resistance, pressure test, materials, resistance to separation, test methods.

Cooling pipes in motor vehicles - Hoses and compounds - Part 2: Requirements, testing

GM 9986101-1996 NLGI.1高分子-类型润滑脂

Materialet ar en tvarbunden PE-cellplast med slutna celler.

Grease, Polymer - Type, NLGI 1

JT/T 225-1996 汽车发动机冷却液安全使用技术条件

本标准规定了汽车发动机冷却系统用冷却液的安全适用技术条件及推荐适用范围。 本标准适用于汽车发动机冷却系统使用的冷却液的使用和检验、社会抽查、行业统检。

Specifications of safe using automobile engine coolant fuild

GM 9986112-1996 热塑嵌缝膏热熔胶粘剂

Materialet anvands som mellanlagg for att forhindra notning.

Adhesive, Hot Melt, Thermoplastic Sealant

ASTM D1882-96(2012) 汽车用冷却系统化学溶液对车辆有机面漆产生影响的标准试验方法

4.1 This test method will distinguish between cooling system chemical solutions that do or do not have a tendency to change the surface appearance when applied to organic finishes used on vehicles. Such changes may be manifested by discoloration, loss of gloss, softening, swelling, or other similar phenomena. 1.1 This test method determines the effect of cooling system chemical solutions on organic finishes used on motor vehicles. Cooling system chemicals include: coolants or corrosion inhibitors, or both, cooling system cleaners or flushes, or both, and stop leak additives. Note 1???This test method is a modification of Practice D1540. 1.2 The values stated in SI units are to be regarded as the standard. The values stated in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles

SAE J1751-1995 汽车工业机器工具和设备上所用的润滑部件和系统的推荐实施规程.1995年12月

These recommended practices are applicable for lubricating components and systems supplied on machines and equipment used in the automotive industry; for the purpose of this document, any equipment dispensing lubricant used in manufacturing and/or assembly processes. These practices do not apply to injection lubrication of pneumatic components.

Lubrication Components and Systems Used on Machine Tools and Equipment for the Automotive Industry, Recommended Practice December 1995

UL 307A-1995 装配式(活动)房屋和旅游车用液体燃料加热装置

The following is being proposed: 1. Continuance of the Standard for Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles, UL 307A, as an American National Standard.

Liquid fuel-burning heating appliances for manufactured homes and recreational vehicles

JIS D 8003:1994 汽车集中润滑系统的试验规程

この規格は，自動車シャシの集中給油装置(以下，給油装置という。)の性能試験方法について規定する。

Test code of centralized lubricating systems for automobiles

ANSI/SAE J1468-1993 油－空气式润滑油冷却器的冷却性能应用试验

This SAE Recommended Practice is applicable to oil-to-air oil coolers installed on mobile or stationary equipment. This document outlines the method of procuring the test data to determine operating characteristics of the oil cooling system and the interpretation of the test results. The purpose of this document is to provide a procedure for determining the cooling performance characteristics of an oil-to-air oil cooler under specified operating conditions.

Application Testing of Oil-to-Air Oil Coolers for Cooling Performance

NF R18-702-2:1992 道路车辆.安装在毛载重量大于 3.5 吨的商用车辆配套式加热系统.第2部分:气体运行的丁烷/丙烷加热系统

Road vehicles. Self sustained heating systems installed on commercial vehicles over 3,5 T gvw(R). Part 2 : specific safety requirements for gaz operated butan/propan heating systems.

QC/T 31-1992 汽车用全流式机油滤清器滤芯尺寸

本标准规定了道路车辆用全流式机油滤清器可更换滤芯的尺寸和标记。 　　本标准适用于新设计的道路车辆用机油滤清器的可更换滤芯。 　　本标准也适用于其它型式的机油滤清器的可更换滤芯。

Car full flow oil filter element size

QC/T 33-1992 汽车风扇离合器试验方法

本标准规定了内燃机风扇离合器的试验项目、试验条件和试验方法。 　　本标准适用于汽车、拖拉机、工程机械等行走机械中内燃机用，和冷却风扇匹配的风扇离合器总成。 　　凡新设计或有重大改进设计的风扇离合器的恶定型试验，转厂生产的产品验证试验和现生产产品的质量检查试验均按本标准规定的方法进行。

Automobile fan clutch test method

SAE J2082-1992 冷却流量测量技术

This SAE Information Report has been prepared by the standards committee on cooling flow measurement (CFM) at the request of the sAE road Vehicle Aerodynamics Forum Committee (RVAC). The committee was formed in January 1985 for the purpose of investigating what measuring techniques are used by automotive product manufacturers to determine air cooling air flow rates and, if possible, to synthesize these into a recommended practice report. Although a great deal is already known about engine cooling, recent concern with fuel conservation has resulted in generally smaller air intakes whose shape and location are dictated primarily by low vehicle drag/high forward speed requirements. the new vehicle intake configurations make it more difficult to achieve adequate cooling under all conditions. They cause cooling flow velocity profiles to become distorted and underhood temperatures to be excessively high. Such problems make it necessary to achieve much better accuracy in measuring cooling flows. As the following descriptions show, each company or institution concerned with this problem has invested a lot of time and as a result gained considerable experience in developing measuring techniques that appear to achieve reliable results. there is however, little uniformity at the present time among the methods used by different companies and no indication at this time of a trend towards a simple and universally acceptable measuring technique. If one can make generalizations, it seems that the North American industry appears to use vane anemometers, whereas the European industry appears to favor pressure measurements for determining cooling air flows. Usually cooling flow measurement makes use of ensemble average calibrations of arrayed sensors. The major drawback of ensemble averaging usage of sensors appears to be the need for prior calibration of each combination of sensor array and radiator/vehicle front-end configuration. While there appears to be a growing interest in also knowing flow distributions--which necessitates the use of a plurality of sensing devices--very little is made of area-averaging techniques. Given the present state of the technology, this report covers simply an overview of the different measuring techniques deployed in the industry, and it is left to the future to report on developments towards a unified cooling flow measurement method.

Cooling Flow Measurement Techniques

QC/T 29061-1992 汽车发动机用蜡式调温器技术条件

本标准规定了汽车发动机用蜡式调温器的技术要求、试验方法、检验规则以及包装、标志、运输与贮存要求。 　　本标准适用于汽车水冷式发动机用调温器，其它用途的水冷式发动机用调温器也可参照使用。

Specifications for wax-type thermostats for automobile engines

NF R15-602-8:1991 道路车辆.冷却液.试验方法.第8部分:防腐蚀性能的测定.热板腐蚀方法

Road vehicles. Cooling fluids. Test methods. Part 8 : measurement of corrosion protection properties. Hot plate corrosion method.

NF R15-602-7:1991 道路车辆.冷却液.试验方法.第7部分:防腐蚀性能的测定.玻璃腐蚀方法

Road vehicles. Cooling fluids. Test methods. Part 7 : measurement of corrosion protection properties. Glassware corrosion method.

ISO 9817:1991 乘用车 发动机冷却系统 注水口上的带限压阀加水口盖及其斜面座的尺寸

The seats with clamping ramps shown in figure 1 shall be in accordance with the dimensions given in table 1. The pressure caps shown in figure 2 shall be in accordance with the dimensions given in table 2.

Passenger cars; engine cooling systems; dimensions of pressure caps and their ramp seats on filler necks

ISO 9818:1991 乘用车 发动机冷却系统 带限压阀加水口盖的试验方法和标志

Specifies test methods and a marking system for pressure caps. Annex A forms an integral part of this standard.

Passenger cars; engine cooling systems; test methods and marking of pressure caps

QC/T 29025-1991 汽车管带式散热器芯子型式尺寸

The type and size of the core of the car tube belt radiator

NF R15-602-2:1991 道路车辆.冷却流体.试验方法.第2部分:折射系数的测定

Road vehicles. Cooling fluids. Test methods. Part 2 : measurement of refraction index.