U25 舱室设备 标准查询与下载

ISO 15370:2021 船舶与海上技术. 客轮低位照明(LLL). 布置

This document specifies the requirements for the approval, installation and maintenance of lowlocation lighting systems as defined in Chapter II-2, Regulation 13.3.2.5.1 of the International Convention for the Safety of Life at Sea, 1974 ISOLAS 74), as amended in 2000, and detailed in Chapter 11 of the International Code for Fire Safety Systems (FSS Code).

Ships and marine technology - Low-location lighting (LLL) on passenger ships - Arrangement

BS EN ISO 8099-1:2018 小工艺品 废物系统 废水滞留

Small craft. Waste systems. Waste water retention

DIN 83104:2018 船用重型铰链门和舱盖用卡栓

The standard is applicable for dogs which are preferably used for heavy-duty doors according to DIN 83100 Part 1 and Part 2, and for emergency exits according to DIN 83414 Part 1. The size, design, material and labelling are appointed.

Dogs for heavy-duty doors on ships and for hatch covers

ISO 8099-1:2018 小艇.废物处理系统.第1部分:污水滞留

Small craft - Waste systems - Part 1: Waste water retention

DIN 81419:2016 窗帘盒

Holders for curtain rods

DIN 83100-2:2016 船舶用重型铰链门.第1部分:不防风雨

Heavy hinged doors on ships - Part 2: Non-weathertight

DIN 83100-3:2016 船用重型铰链门.第3部分:钢制门

Heavy hinged doors on ships - Part 3: Doors made of steel

DIN 83100-1:2016 船舶用重型铰链门.第1部分:防风雨(ISO型)

Heavy hinged doors on ships - Part 1: Weathertigth (ISO-type)

DIN 81612:2016 船用舷窗. 超轻量级 (天窗). 不可打开的螺纹舷窗

Side scuttles for ships - Extra-lightweight (skylights) - Unopenable, screw-on side scuttles

ISO 15371:2015 船舶和海洋技术.船上厨房烹饪设备保护用消防系统

Ships and marine technology - Fire-extinguishing systems for protection of galley cooking equipment

ISO 6042:2015 船舶与海上技术.钢质单扇风雨密门

This International Standard specifies the main dimensions, materials, quality and conditions of manufacture for weathertight single-leaf steel doors for application on board ships, in order to ensure interchangeability of the steel doors. The remaining dimensions, welding, and other details are left to the manufacturer. These doors generally conform to the requirements of the International Convention on Load Lines 1966 (ICLL66). The possibility for application of the doors to position 1 and position 2 has to be considered for each situation and, where necessary, the doors shall be provided with additional stiffening (see also Table 1). Users of this International Standard should note that while observing the requirements of this International Standard they should, at the same time, ensure compliance with such statutory requirements, rules, and regulations as may be applicable to the individual ship concerned.

Ships and marine technology - Weathertight single-leaf steel doors

CB/T 4266-2014 船用食品冷库

本标准规定了以硬质聚氨脂泡沫为隔热层组合而成的船用食品冷库(以下简称冷库)的分类和标记、要求、试验方法、检验规则、标志、包装、运输及储存。本标准适用于冷库的制造和验收。

Marine refrigerated provision chamber

CB/T 3231.1-2014 船用厨房不锈钢家具 第1部分: 配餐桌

本标准规定了船用厨房不锈钢家具中配餐桌(简称配餐桌)的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于船舶及海上结构物上所使用配餐桌的设计、制造及验收。

Marine galley stainless steel fitment.Part 1: Pantry table

CB/T 3231.3-2014 船用厨房不锈钢家具 第3部分: 洗桌

本标准规定了船用厨房不锈钢家具中洗桌(简称洗桌)的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于船舶及海上结构物上所使用洗桌的设计、制造及验收。

Marine galley stainless steel fitment.Part 3: Washing table

CB/T 3231.4-2014 船用厨房不锈钢家具 第4部分: 储物柜

本标准规定了船用厨房不锈钢家具中储物柜的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于船舶及海上结构物上所使用储物柜的设计、制造及验收。

Marine culinary stainless steel fitment.Part 4: Cabinet

CB/T 3231.9-2014 船用厨房不锈钢家具 第9部分:垃圾筒(箱)

本标准规定了船用厨房不锈钢家具中垃圾筒(箱)的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于船舶及海上结构物上所使用垃圾筒(箱)的设计、制造和检验。

Marine galley stainless steel fitment.Part 9: Trash

CB/T 4264-2014 船用金属蜂窝复合板

本标准规定了船用金属蜂窝复合板(以下简称蜂窝板)的型式、标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于船舶和海洋工程建筑物上具有耐火分隔要求的舱室和生活模块中蜂窝板(包括天花板、衬板、隔板)的设计、制造和验收。

Marine metal honeycomb plate

CB/T 3231.2-2014 船用厨房不锈钢家具 第2部分: 工作桌

本标准规定了船用厨房不锈钢家具中工作桌(简称工作桌)的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于船舶及海上结构物上所使用工作桌的设计、制造及验收。

Marine galley stainless steel fitment.Part 2: Working table

CB/T 3233-2014 船用厨房不锈钢家具技术条件

本标准规定了船用厨房不锈钢家具(简称不锈钢家具)的要求、检验规则、标志、包装和运输。本标准适用于CB/T 3231. 1~3231. 9《船用厨房不锈钢家具》所规定的家具的设计、制造和验收。

Technical requirement of marine galley stainless steel fitment

CB/T 3231.8-2014 船用厨房不锈钢家具 第8部分:吊架

本标准规定了船用厨房不锈钢家具中吊架的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于船舶及海上结构物上所使用吊架的设计、制造和检验。

Marine galley stainless steel fitment.Part 8: Cabinet