U60 船舶电气、观通、导航设备综合 标准查询与下载

DIN EN IEC 60309-5:2021 工业用插头、插座和耦合器. 第5部分: 低压岸电连接系统(LVSC)的插头、插座、船舶连接器和船舶入口的尺寸兼容性和互换性要求(IEC 60309-5-2017); 德文版 EN IEC 60309-5-2019

This part of 60309 applies to plugs, socket-outlets, ship connectors and ship inlets, hereinafter referred to as accessories, intended to connect ships to dedicated shore supply systems described in IEC 80005-3.

Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC) (IEC 60309-5:2017

DIN EN IEC 62613-1:2018 高压海岸连接系统(HVSC-系统)用船用耦合器,插座引线和插头. 第1部分: 一般要求(IEC 62613-1-2011); 德文版本EN IEC 62613-1-2018

This standard applies to accessories with: - Three-phase (3 poles and earth) with up to three pilot contacts, - Single-pole (Neutral) These accessories have rated currents not exceeding 500 A and rated operating voltages not exceeding 12 kV 50/60 Hz.

Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements (IEC 62613-1:2011); German version EN IEC 62613-1:2018

IEC 60092-101:2018 船用电气装置. 第101部分: 定义和一般要求

This part of IEC 60092 is applicable to electrical installations for use in ships. The definitions and general requirements given in this part are applicable, unless otherwise indicated, to other parts of the IEC 60092 series.

Electrical installations in ships - Part 101: Definitions and general requirements

IEC 60092-376:2017 船舶电气设施.第376部分:控制和测量电路150/250V (300 V)用电缆

This part of IEC 60092 is applicable to screened and unscreened cables for control and instrumentation circuits on ships and offshore units. The cables have extruded solid insulation with a voltage rating of 150/250V (300V) (see Clause 4) and are intended for fixed installations. The various types of cables are given in Clause 5. The constructional requirements and test methods are aligned with those indicated in IEC 60092-350, unless otherwise specified in this document. The object of this document is to standardise cables whose safety and reliability are ensured when they are installed in accordance with the requirements of IEC 60092-352; to lay down standard manufacturing requirements and characteristics of such cables directly or indirectly bearing on safety, and; to specify test methods for checking conformity with those requirements.

Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)

BS EN 61162-1:2016 海上导航和无线电通信设备和系统 数字接口 单个说话者和多个听众

Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners

IEC 62613-2:2016 高压岸接头系统(HVSC系统)用插头电气插座和船耦合器.第2部分:各种类型轮船用配件的尺寸兼容性和可替换性要求

This part of IEC 62613 contains standard sheets for different configurations of (shore) socket- outlets, (shore) plugs, ship connectors and ship inlets, hereinafter referred to as accessories, up to 12 kV, 500 A, 50/60 Hz and with up to seven pilot/auxiliary contacts. General requirements are given in IEC 62613-1.

Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships

IEC 60092-202:2016 船舶电气设施.第202部分:系统设计.保护

This part of IEC 60092 is applicable to the main features of the electrical protective system to be applied to electrical installations for use in ships.

Electrical installations in ships - Part 202: System design - Protection

EN 14504:2016 海上导航船舶-浮动码头和内陆水域漂浮设备-要求,试验

This European Standard specifies safety requirements for floating landing stages and floating systems for passenger transport and their equipment. Requirements relating to supplies to disposals of berthing vessels are not governed by this Standard. It is not applicable to: floating landing stages for motor vehicle traffic; floating landing stages for recreational craft and for vehicles of inland navigation vessels which are not berthing vessels, e. g. floating equipment; more severe requirements for floating landing stages used for the transhipment of dangerous goods; any landing stages required between vessel and floating landing stage; specialised floating structures which are not used for passenger traffic or the berthing of vessels.

Inland navigation vessels - Floating landing stages and floating equipment on inland waters - Requirements@ tests

DIN VDE 0100-730:2016 低压电气装置. 第7-730部分: 特殊装置或场所的要求. 内河航行船舶用电岸连接装置; 德文实施HD 60364-7-730-2015

Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels; German implementation HD 60364-7-730:2015

BS EN 61174:2015 海上导航和无线电通信设备和系统 电子海图显示和信息系统（ECDIS） 操作和性能要求、测试方法和所需的测试结果

Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results

DIN EN 62320-1:2015 船舶导航和无线电通信设备和系统.自动识别系统(AIS).第1部分:AIS基地.最低操作和性能要求、测试方法和要求试验结果(IEC 62320-1-2015);英文版本EN 62320-1-2015

Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results (IEC 62320-1:2015); Engli

EN ISO 19009:2015 小艇.电动导航灯.LED灯的性能(ISO19009:015)

Diese Internationale Norm gilt für Anforderungen und Prüfungen für Positionslaternen mit fest eingebauter LED-Lichtquelle für kleine Wasserfahrzeuge mit einer Rumpflänge von bis zu 24 m.

Small craft - Electric navigation lights - Performance of LED lights (ISO 19009:2015)

IEC 61892-1:2015 移动式及固定式近海装置.电气装置.第1部分:一般要求和条件

This part of IEC 61892 contains provisions for electrical installations in mobile and fixed offshore units including pipeline, pumping or 'pigging' stations, compressor stations and exposed location single buoy moorings, used in the offshore petroleum industry for drilling, processing and storage purposes. This International Standard applies to all installations, whether permanent, temporary, transportable or hand-held, to AC installations up to and including 35000 V and DC installations up to and including 1500 V (AC and DC voltages are nominal values). This standard does not apply either to fixed equipment for medical purposes or to the electrical installations of tankers. NOTE For medical rooms, IEC 60364-7-710 provides more information.

Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions

SC/T 6074-2015 渔船用射频识别(RFID)设备技术要求

本标准规定了用于渔业船舶的射频识别设备的组成、分类、功能、性能及安装环境的通用技术要求。 本标准适用于渔业船舶所用射频识别设备的研制、选型和使用，可作为渔船射频识别系统建设的参考依据。

Technical requirements for radio frequency identification equipments for fishery vessels

DIN EN 62288:2015 海上导航和无线电通信设备和系统.船用导航显示器上与导航相关信息的表达.通用要求、测试方法和要求的试验结果(IEC 62288-2014);英文版本EN 62288-2014

Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results (IEC 62288:2014); English version EN

BS EN 62320-1:2015 船舶导航和无线电通信设备和系统.自动识别系统(AIS).自动识别系统基站.测试最低限度运作、性能要求和方法及要求的试验结果

Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS). AIS Base Stations. Minimum operational and performance requirements, methods of testing and required test results

BS EN 60092-507:2015 船用电气设备.小艇

Electrical installations in ships. Small vessels

IEC 62320-1:2015 海上导航和无线电通信设备和系统.自动识别系统(AIS).第1部分:AIS基站.最低限度和性能要求,试验方法和要求的试验结果

This part of IEC 62320 specifies the minimum operational and performance requirements@ methods of testing and required test results for AIS Base Stations@ compatible with the performance standards adopted by IMO Resolution MSC.74 (69)@ Annex 3@ Universal AIS. It incorporates the technical characteristics of non-shipborne@ fixed station AIS equipment@ included in recommendation ITU-R M.1371 and IALA Recommendation A-124. Where applicable@ it also takes into account the ITU Radio Regulations. This standard takes into account other associated IEC international standards and existing national standards@ as applicable. This standard is applicable for AIS Base Stations. It does not include specifications for the display of AIS data on shore.

Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results

IEC 61892-5:2014 移动式及固定式近海装置.电气装置.第5部分:移动装置

This part of IEC 61892 specifies the characteristics for electrical installations in mobile units@ for use during transfer from one location to another and for use during the exploration and exploitation of petroleum resources. It applies to all installations@ whether permanent@ temporary@ transportable or hand-held@ to AC installations up to and including 35 000 V and DC installations up to and including 1 500 V. (AC and DC voltages are nominal values). NOTE Attention is drawn to further requirements concerning electrical installations on such mobile offshore units contained in the MODU CODE of the International Maritime Organization (IMO).

Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units

IEC 60092-507:2014 船舶电气设施.第507部分:小型船

General This part of IEC 60092 specifies requirements for the design@ construction and installation of electrical systems in small vessels@ which have a length of up to 50 m@ or which have a gross tonnage not exceeding 500 Gross Tonnes (GT)@ designed for use on inland waters or at sea. It is not intended to apply to: a) small craft equipped only with a battery supplying circuits for engine starting and navigation lighting recharged from an inboard or outboard engine driven alternator. b) recreational craft of less than 24 m hull length requiring to conform to the Recreational Craft Directive 94/25/EC Annex 1 Essential Requirements Part 5.3 Electrical systems@ except for three-phase alternating current installations in such recreational craft which operate at a nominal voltage not exceeding AC 500 V.

Electrical installations in ships - Part 507: Small vessels