U60 船舶电气、观通、导航设备综合 标准查询与下载

BS ISO 25862:2009 船舶和海洋技术. 磁罗盘、罗盘座和方位判读装置

Ships and marine technology. Marine magnetic compasses, binnacles and azimuth reading devices

IEC 60092-350:2014 船舶用电气装置.第350部分:船舶和海上设备用电力控制器和仪器电缆的通用结构和试验方法

Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications

IEC 60092-354:2014 船舶电气设施.第354部分:额定电压为6至30kV的挤压固体绝缘单芯和三芯电力电缆

This part of IEC 60092 is applicable to shipboard and offshore power cables with extruded solid insulation@ conductor and core screening@ having a voltage rating of one of the following: 3@6/6 (7@2) kV@ 6/10 (12) kV@ 8@7/15 (17@5) kV@ 12/20 (24) kV@ 18/30 (36) kV. NOTE 1 Subclause 4.1 gives more details. The cables are intended for fixed installations. The various types of power cables are given in 5.1. The constructional requirements and test methods are aligned with those indicated in IEC 60092-350@ unless otherwise specified in this standard. The object of this standard is: ?C to standardize cables whose safety and reliability are ensured when they are installed in accordance with the requirements of IEC 60092-352 or IEC 61892-4; ?C to lay down standard manufacturing requirements and characteristics of such cables directly or indirectly bearing on safety; ?C to specify test methods for checking conformity with those requirements. NOTE 2 Only radial field cables are covered.

Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) bis 30 kV (Um = 36 kV)

BS EN 62388:2013 海上导航和无线电通信设备和系统.船用雷达.性能要求、测试方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results

BS IEC 61892-6:2013 海上移动和固定设备. 电气装置. 安装

Mobile and fixed offshore units. Electrical installations. Installation

CB/T 3667.4-2013 船舶电缆敷设和电气设备安装附件 电气设备安装件

本标准规定了电气设备安装件的分类和标记、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于船舶固定安装的电气设备用的桥形板、电气设备支柱(以下简称支柱)、电气设备支架(以下简称支架)以及单只壁挂式中型电气设备用的基座的设计、制造和验收。

Outfit accessories for marine cable laying and electric equipment installation.Outfit accessories for electric equipment installation

CB 20083-2012 潜艇直流电机经济航行调节器规范

本规范规定了潜艇直流推进电机经济航行调节器(以下简称调节器)的要求、质量保证规定和交货准备等。本规范适用于潜艇调节器的设计、制造与验收。

Specification for economical cruise chopper of submarine DC motor

CB 20093-2012 舰船用光柱数字显示仪规范

本规范规定了舰船用光柱数字显示仪(以下简称显示仪)的要求、质量保证规定和交货准备。本规范适用于显示仪的设计、制造和验收。

Specification for bargraph digital display of ship

CB 20048-2012 舰船防爆舱室电缆敷设工艺

本标准规定了舰船防爆舱室(简称防爆舱室)电缆敷设的一般要求、敷设流程、电缆管连接要求等。本标准适用于舰船防爆舱室的电缆敷设。

Cable laying technology of explosion-proof cabin in naval ships

CB/Z 20005-2012 舰艇用加固计算机系列选用导则

本标准规定了舰艇用加固计算机(简称加固计算机)系列、品种的选择及应用导则。本标准适用于舰艇装备在设计和制造时优先选用的加固计算机系列和品种,也可作为加固计算机生产、研制、开发时选择系列和品种的参考依据。

Selection rule of rugged computer series for naval ships

CB 20100-2012 水面舰艇导弹武器系统发射装置与接口设备联试方法

本标准规定了水面舰艇导弹武器系统发射装置(以下简称发射装置)与武器系统内有接口关系的设备(以下简称接口设备)联试试验项目和试验方法。本标准适用于各种类型发射装置与接口设备陆上联调试验、系泊试验和航行试验。

Method of co-experiment between ship-board missile weapon system launcher and interface equipment

KS V ISO 17894:2012 船舶与海洋技术.计算机应用.海上用可编程电子系统的开发和使用总则

이 표준은 선박에 사용하고자 하는 신뢰할 수 있는 해양의 프로그램 가능 전자시스템의 개발과

Computer applications－General principles for the development and use of programmable electronic systems in marine applications

KS C IEC 60092-306:2012 船舶电气装置.第306部分:设备.灯具及照明配件

이 표준은 선박용 조명기기 및 조명 부속품에 대한 표준 요구사항을 규정한다. 이 표준은 주

Electrical installations in ships-Part 306:Equipment-Luminaires and lighting accessories

KS C IEC 61892-4:2012 移动式及固定式海洋构造物.电气设备.第4部分:电线

이 표준은 시추, 생산, 처리 및 저장을 목적으로 하여 해양 석유산업에 사용되는, 이동식

Mobile and fixed offshore units-Electrical installations-Part 4:Cables

BS ISO/IEC/IEEE 80005-1:2012 港口内公用工程接头.高压岸电连接(HVSC)系统.通用要求

Utility connections in port. High Voltage Shore Connection (HVSC) Systems. General requirements

IEC 61892-2:2012 移动式及固定式近海装置.电气设施.第2部分:系统设计

This part of IEC 61892 contains provisions for system design of electrical installations in mobile and fixed units used in the offshore petroleum industry for drilling@ production@ processing and for storage purposes@ including pipeline@ pumping or 'pigging' stations@ compressor stations and exposed location single buoy moorings. It applies to all installations@ whether permanent@ temporary@ transportable or hand-held@ to a.c. installations up to and including 35 000 V and d.c. installations up to and including 1 500 V. (a.c. and d.c. voltages are nominal values). This standard does not apply either to fixed equipment used for medical purposes or to the electrical installations of tankers.

Mobile and fixed offshore units - Electrical installations - Part 2: System design

IEC 61892-3:2012 移动式及固定式近海装置.电气设施.第3部分:设备

This part of IEC 61892 contains provisions for electrical equipment in mobile and fixed offshore units including pipeline@ pumping or 'pigging' stations@ compressor stations and exposed location single buoy moorings@ used in the offshore petroleum industry for drilling@ processing and for storage purposes. This standard applies to equipment in all installations@ whether permanent@ temporary@ transportable or hand-held@ to a.c. installations up to and including 35 000 V and d.c. installations up to and including 1 500 V (a.c. and d.c. voltages are nominal values). This standard sets requirements for equipment@ which are additional to the requirements given in the product standard for the relevant equipment. This standard does not apply to the electrical installations in rooms used for medical purposes or in tankers.

Mobile and fixed offshore units - Electrical installations - Part 3: Equipment

ANSI/ASTM F1669M:2012 船用电气系统绝缘监视器规范(米制)

Specification for Insulation Monitors for Shipboard Electrical Systems (Metric)

ANSI/ASTM F1134:2012 船用电动机和发电机绝缘电阻监测器规格

Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

IEC 62613-2:2011 高压岸接头系统(HVSC系统)用插头电气插座和船耦合器.第2部分:各种类型轮船用配件的尺寸兼容性和可替换性要求

"INTRODUCTION International Standard series IEC 62613 has been primarily written to address the needs in terms of plugs@ socket-outlets and ship couplers (ship connectors and ship inlets)@ herein referred to as ""accessories""@ of IEC/PAS 60092-510. The purpose of IEC/PAS 60092-510 is to define requirements that allow compliant ships to connect to compliant high-voltage shore power supplies through standardized shore-to-ship connection accessories. Ships that do not require connecting with standardized high-voltage shore power supplies as above may use accessories that are not covered by the standard sheets of IEC 62613-2 but they may find it impossible to connect to these shore supplies. Other low voltage plugs@ socket-outlets@ ship connectors and ship inlets used for the connection of certain ship types to low-voltage shore power supplies may be found in the IEC 60309 series. The IEC 62613 series is divided into several parts: ?C Part 1: General requirements@ comprising clauses of a general character; ?C Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships. These ships are described in IEC/PAS 60092-510."

Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships